How to remove and install the timing belt, spark plug leads or ignition coils, and the rocker cover on a Camshaft-equipped engine on Mitsubishi Lancer?

To remove the timing belt, first, take off the spark plug leads (or ignition coils) and rocker cover. Then, remove the timing belt. Depending on your model type, either remove the distributor assembly (for 1.5 litre models) or the camshaft position sensor (for all other models). Subsequently, remove the camshaft sprocket, the rocker arms and shafts and withdraw the camshaft from the cylinder head, being careful not to cause any damage to the bearing running surfaces by the cam lobes. Make a note of how far the oil seal is installed, then gently lever the oil seal out of the front of the head. Clean and dry the camshaft thoroughly to inspect the lobes, journals and thrust faces for pitting and wear. If necessary, measure with a micrometer and renew if excessive wear is found on the camshaft. Moreover, inspect the cylinder head's bearing running surfaces for damage or overheating, renewing the head or consulting a specialist if you notice problems. If you suspect bearing wear, the bearing journals and bores should be measured in order to determine their oil clearance. This clearance should then be compared with specifications and you should consult a specialist who will recommend renewal or just further inspection of the component, which could include the bearings. To install the assembly, follow the disassembly procedure in reverse order. Ensure to coat all journals and cam lobes with clean engine oil. Carefully position the shaft in the cylinder head, avoiding damage to the bearing surfaces and oil seal. To the noted depth, install the new camshaft oil seal such that the seal lips face inwards, are square and lubricated with multipurpose grease. After that, fit the rocker arms and shafts, timing belt and distributor or camshaft position sensor, spark plugs and leads, rocker cover, following the reverse procedure.

Genuine Mitsubishi Camshaft

Cam

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

24 Camshafts found

View related parts
Mitsubishi Camshaft Part Number: MD321178
$294.81 MSRP: $416.40
You Save: $121.59 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft, Right-Hand
Fits the following Mitsubishi Models:
- Montero Sport | 1999-2003 | ES, LS, XLS | 6 Cyl 3.0 L GAS
View related parts
Mitsubishi Camshaft Part Number: 1015C313
$316.66 MSRP: $447.27
You Save: $130.61 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft, Inlet
Fits the following Mitsubishi Models:
- Outlander PHEV | 2023-2024 | ES, Platinum Edition, Ralliart, SE, SE Tech, SEL, SEL Premium, SEL Touring | 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Mitsubishi Camshaft Part Number: 1015B939
$335.88 MSRP: $474.40
You Save: $138.52 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft, Inlet
Fits the following Mitsubishi Models:
- Outlander PHEV | 2021 | GT, LE, SEL | 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Mitsubishi Camshaft Part Number: MD370515
$349.66 MSRP: $493.87
You Save: $144.21 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft, Left-Hand
Fits the following Mitsubishi Models:
- Montero | 2002-2006 | Limited, XLS | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Camshaft Part Number: 1015B407
$357.68 MSRP: $505.20
You Save: $147.52 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft, Left-Hand
Fits the following Mitsubishi Models:
- Outlander | 2010-2020 | GT, XLS | 6 Cyl 3.0 L GAS
View related parts
Mitsubishi Camshaft Part Number: 1015B405
$357.68 MSRP: $505.20
You Save: $147.52 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft, Right-Hand
Fits the following Mitsubishi Models:
- Outlander | 2010-2020 | GT, XLS | 6 Cyl 3.0 L GAS
View related parts
Mitsubishi Camshaft Part Number: 1015A393
$376.95 MSRP: $532.42
You Save: $155.47 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft, Exhaust
Fits the following Mitsubishi Models:
- Lancer | 2006 | ES, OZ Rally, SE | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Camshaft Part Number: 1015A795
$382.43 MSRP: $540.15
You Save: $157.72 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft, Left-Hand
Fits the following Mitsubishi Models:
- Outlander | 2007-2009 | ES, LS, XLS | 6 Cyl 3.0 L GAS
View related parts
Mitsubishi Camshaft Part Number: MN163444
$384.18 MSRP: $542.63
You Save: $158.45 (30%)
Ships in 1-2 Business Days
ADD TO CART
Fits the following Mitsubishi Models:
- Galant | 2004 | DE, ES | 4 Cyl 2.4 L GAS
- Lancer | 2004 | Ralliart, Sportback, Sportback Ralliart | 4 Cyl 2.4 L GAS
- Outlander | 2004 | LS, XLS | 4 Cyl 2.4 L GAS
View More
View related parts
Mitsubishi Camshaft Part Number: 1015A164
$386.53 MSRP: $545.95
You Save: $159.42 (30%)
Ships in 1-2 Business Days
ADD TO CART
Fits the following Mitsubishi Models:
- Galant | 2005-2012 | DE, ES, FE, SE, Sport Edition | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Camshaft Part Number: MN149841
$387.95 MSRP: $547.95
You Save: $160.00 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft, Right-Hand
Fits the following Mitsubishi Models:
- Galant | 2004-2009 | GTS, LS, Ralliart, Sport V6 | 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Intake Camshaft Part Number: 1015B918
$390.04 MSRP: $550.90
You Save: $160.86 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft, Inlet; Camshaft
Fits the following Mitsubishi Models:
- Mirage | 2017-2024 | BE, Black Edition, Carbonite Edition, ES, GT, LE, RF, SE | 3 Cyl 1.2 L GAS
- Mirage G4 | 2017-2024 | BE, Carbonite Edition, ES, LE, RF, SE | 3 Cyl 1.2 L GAS
View related parts
Mitsubishi Exhaust Camshaft Part Number: 1015B810
$390.04 MSRP: $550.90
You Save: $160.86 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft, Exhaust; Camshaft
Fits the following Mitsubishi Models:
- Mirage | 2017-2024 | BE, Black Edition, Carbonite Edition, ES, GT, LE, RF, SE | 3 Cyl 1.2 L GAS
- Mirage G4 | 2017-2024 | BE, Carbonite Edition, ES, LE, RF, SE | 3 Cyl 1.2 L GAS
View related parts
Mitsubishi Camshaft Part Number: 1015A508
$409.59 MSRP: $578.52
You Save: $168.93 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft, Inlet
Fits the following Mitsubishi Models:
- Lancer | 2009-2010 | GTS, GTS Sportback | 4 Cyl 2.4 L GAS
- Outlander | 2008-2013 | ES, SE | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Camshaft Part Number: 1015A758
$412.03 MSRP: $581.97
You Save: $169.94 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft, Inlet
Fits the following Mitsubishi Models:
- Lancer | 2008-2010 | DE, ES, GTS | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Camshaft Part Number: 1015A759
$421.04 MSRP: $594.68
You Save: $173.64 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft, Exhaust
Fits the following Mitsubishi Models:
- Lancer | 2008-2010 | DE, ES, GTS, GTS Sportback | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Outlander | 2010 | ES, SE | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Camshaft Part Number: 1015A840
$421.07 MSRP: $594.73
You Save: $173.66 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft, Exhaust
Fits the following Mitsubishi Models:
- Lancer | 2008-2015 | Evolution Final Edition, Evolution GSR, Evolution MR, Evolution MR Touring, Evolution SE, Ralliart, Ralliart Sportback | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Camshaft Part Number: 1015B347
$468.42 MSRP: $661.62
You Save: $193.20 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft, Inlet
Fits the following Mitsubishi Models:
- Lancer | 2011-2017 | ES, GT, GT Sportback, GTS, GTS Sportback, SE, SEL | 4 Cyl 2.4 L GAS
- Outlander PHEV | 2018-2020 | GT, SEL | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- Outlander Sport | 2015-2024 | ES, GT, GT Special Edition, SE, SEL | 4 Cyl 2.4 L GAS
View More
View related parts
Mitsubishi Camshaft Part Number: MQ718442
$527.01 MSRP: $744.37
You Save: $217.36 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft, Inlet
Fits the following Mitsubishi Models:
- Outlander | 2022-2024 | Black Edition, ES, SE, SE Launch Edition, SEL, SEL Launch Edition | 4 Cyl 2.5 L GAS
View related parts
Mitsubishi Camshaft Part Number: 1015A762
Product Specifications
- Other Name: Camshaft, Inlet
Fits the following Mitsubishi Models:
- Lancer | 2008-2015 | Evolution Final Edition, Evolution GSR, Evolution MR, Evolution MR Touring, Evolution SE, Ralliart, Ralliart Sportback | 4 Cyl 2.0 L GAS

| Page 1 of 2 |Next >

1-20 of 24 Results

Mitsubishi Camshaft

The Mitsubishi Camshaft effortlessly manages precise valve timing. This ensures that during every four-stroke operating cycle, you receive the right breath of air and fuel. As a result, you enjoy smooth power delivery and reliable fuel efficiency. The Camshaft is a hardened steel rod that has lobes that are shaped and machined to a particular profile. These lobes press on followers to open valves, while springs snap them shut when the lobe turns away. The Camshaft is rotating at half crank speed, so it allows opening on the valve during a stroke and closing on the valve during compression and also on the next power and exhaust. This means it is able to time the opening and closing of intake and exhaust valves to perfection. Proper Camshaft timing is essential to preventing engine misfires, backfires, and noisy tapping and keeping the combustion stable whether daily driving or on longer trips. In addition to this essential element, Mitsubishi has gained a reputation for practical innovation since the start of production of its first production car in 1917. MIVEC engines power the company's cars, which are fitted with the Super All Wheel Control built to provide enhanced grip on loose or slippery pavement, along with some handy tools, like cruise control and smartphone link, to make commuting less tough. Continuous experiments with plug-in hybrids, fuel cell systems, and connected safety sensors promise cleaner transportation and confident handling without complexity for the driver. By combining strong mechanical components with intelligent electronic helpers, Mitsubishi provides vehicles that are easy to operate and adventurous to explore, readily performing their duties reliably in cities, on the highways, and through rough trails throughout the world today.

Pick genuine OEM Camshaft if you want superb performance and durability that lasts. Mitsubishi builds that using high-grade materials and official factory techniques to meet very strict standards. This means you get parts you can actually trust for your daily drive. Finding the right parts is simple in the massive stock of genuine inventory. You can stop guessing if a part will fit or hold up. You will love the low prices, dependable service and the real manufacturer's warranty on Mitsubishi Camshaft. Order today and the store will ship your brand-new items to your door as fast as possible.

Mitsubishi Camshaft Parts Questions & Experts Answers

Camshaft
1015A002
Q: How to remove and install the timing belt, spark plug leads or ignition coils, and the rocker cover on a Camshaft-equipped engine on Mitsubishi Lancer?
A:
To remove the timing belt, first, take off the spark plug leads (or ignition coils) and rocker cover. Then, remove the timing belt. Depending on your model type, either remove the distributor assembly (for 1.5 litre models) or the camshaft position sensor (for all other models). Subsequently, remove the camshaft sprocket, the rocker arms and shafts and withdraw the camshaft from the cylinder head, being careful not to cause any damage to the bearing running surfaces by the cam lobes. Make a note of how far the oil seal is installed, then gently lever the oil seal out of the front of the head. Clean and dry the camshaft thoroughly to inspect the lobes, journals and thrust faces for pitting and wear. If necessary, measure with a micrometer and renew if excessive wear is found on the camshaft. Moreover, inspect the cylinder head's bearing running surfaces for damage or overheating, renewing the head or consulting a specialist if you notice problems. If you suspect bearing wear, the bearing journals and bores should be measured in order to determine their oil clearance. This clearance should then be compared with specifications and you should consult a specialist who will recommend renewal or just further inspection of the component, which could include the bearings. To install the assembly, follow the disassembly procedure in reverse order. Ensure to coat all journals and cam lobes with clean engine oil. Carefully position the shaft in the cylinder head, avoiding damage to the bearing surfaces and oil seal. To the noted depth, install the new camshaft oil seal such that the seal lips face inwards, are square and lubricated with multipurpose grease. After that, fit the rocker arms and shafts, timing belt and distributor or camshaft position sensor, spark plugs and leads, rocker cover, following the reverse procedure.