How to remove the front and rear bumpers on Mitsubishi Galant?

To detach the front bumper, the process begins by opening the hood and propping it up. After that, unbolt the radiator grille and remove the fasteners that secure the front fender inner splash shields to the bottom of the bumper cover. Pull back the splash shields from the fenderwell as necessary to locate the bolts that secure the bumper cover to the front fender. If applicable, disconnect fog light wiring harness connectors and remove fog light assemblies. After that, remove the hardware from the upper and lower parts of the bumper cover, then remove the bumper cover from the vehicle. If removing the bumper cover, lay down blankets or suitable padding on the ground so when it falls, the paint is not damaged. At the present stage, the bumper reinforcement can also be removed, if necessary. To install, carry on reverse order of dismantling. To remove the rear bumper cover, open the trunk lid and remove the trunk trim fasteners to access the inner body-to-bumper cover fasteners. Remove the bumper cover body retaining nuts and the lower bumper cover fasteners. To remove the bumper cover from the vehicle, slide it rearward using blankets or padding to shield the paint if you are alone. Bumper reinforcement can be removed as needed. To install, reverse the removal order.

Genuine Mitsubishi Galant Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

Part Type

Bumper Cover
Other Bumpers

Select Part Type

8 Bumpers found

View related parts
Mitsubishi Galant Bumper Cover Part Number: 6400C626
$72.00 MSRP: $100.00
You Save: $28.00 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Face, Front Bumper; Bumper
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2008-2012 Mitsubishi Galant | DE, ES, FE, Ralliart, SE, Sport Edition, Sport V6 | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Galant Bumper Cover Part Number: 6400B277
$87.36 MSRP: $121.33
You Save: $33.97 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Face, Front Bumper; Bumper
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 1999-2001 Mitsubishi Galant | DE, ES, GTZ, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mitsubishi Galant Bumper Cover Part Number: 6410A774
$88.98 MSRP: $123.58
You Save: $34.60 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Face, Rear Bumper, Colorles; Bumper
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2004-2006 Mitsubishi Galant | DE, ES, GTS, LS, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Galant Bumper Cover Part Number: 6400B794
$113.70 MSRP: $157.92
You Save: $44.22 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Face, Front Bumper; Bumper
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2007 Mitsubishi Galant | Ralliart | 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Galant Bumper Cover Part Number: 6400B793
$97.20 MSRP: $134.00
You Save: $36.80 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Face, Front Bumper; Bumper
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2007 Mitsubishi Galant | DE, ES, GTS, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Galant Bumper Cover Part Number: 6400B276
$102.00 MSRP: $141.00
You Save: $39.00 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Face, Front Bumper, Colorles; Bumper
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2004-2006 Mitsubishi Galant | DE, ES, GTS, LS, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Galant Bumper Cover Part Number: 6410A735
$139.68 MSRP: $189.27
You Save: $49.59 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Face, Rear Bumper; Bumper
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2007-2008 Mitsubishi Galant | DE, ES, GTS, Ralliart, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Galant Absorber Part Number: MR533247
$27.33 MSRP: $35.58
You Save: $8.25 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Core, Front Bumper; Bumper
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2002-2003 Mitsubishi Galant | DE, ES, GTZ, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS

Mitsubishi Galant Bumper

The Mitsubishi Galant Bumper is the initial component in a vehicle that absorbs and distributes energy in order to prevent injury in low speed accidents. The Bumper also helps to limit body damage while conforming to legal requirements for road use. Made from high quality material like stainless steel and aluminum, it is designed to check against rust, reflect its surface shine, and blend with the curves and contours of every Mitsubishi Galant trim. The mounting points, which were already drilled at the factory level, create a bolt-on configuration that allows the component to quickly fit onto the chassis without having to make any additional modifications. Bumper may also be made from aluminum, carbon steel, stainless steel, or a combination of metal and plastic, with the various materials balancing weight against strength and rust resistance in different ways. Aluminum is light and easy to maintain, carbon steel offers more strength but at a weight penalty and with increased rust risk, and stainless steel is strong and durable but has improved corrosion resistance. The Mitsubishi Galant Bumper, irrespective of the material, is made to look like the original equipment once mounted, retaining the factory look of any Mitsubishi Galant. For many years it has been helping to protect key front and rear sections, meet safety standards, and provide a long lasting protective barrier that complements the styling of the Mitsubishi Galant.

OEM Bumper can boast superior quality and long-term durability. Each part meets strict factory specs and passes careful checks in production. So you'll get Bumper with long-lasting strength and an exact fit. If you need OEM Mitsubishi Galant Bumper, the online store is the ideal place. The store carry a wide range of genuine Mitsubishi Galant parts at the highly competitive prices. You'll enjoy a simple and no-hassle shopping experience. You'll get unbeatable prices and fast delivery service. You'll get the manufacturer's warranty and a straightforward return policy. Shop with confidence and keep your car in top condition.

Mitsubishi Galant Bumper Parts Questions & Experts Answers

Bumper Cover
6400B277
Q: How to remove the front and rear bumpers on Mitsubishi Galant?
A:
To detach the front bumper, the process begins by opening the hood and propping it up. After that, unbolt the radiator Grille and remove the fasteners that secure the front fender inner splash shields to the bottom of the bumper cover. Pull back the splash shields from the fenderwell as necessary to locate the bolts that secure the bumper cover to the front fender. If applicable, disconnect fog light wiring harness connectors and remove fog light assemblies. After that, remove the hardware from the upper and lower parts of the bumper cover, then remove the bumper cover from the vehicle. If removing the bumper cover, lay down blankets or suitable padding on the ground so when it falls, the paint is not damaged. At the present stage, the bumper reinforcement can also be removed, if necessary. To install, carry on reverse order of dismantling. To remove the rear bumper cover, open the trunk lid and remove the trunk trim fasteners to access the inner body-to-bumper cover fasteners. Remove the bumper cover body retaining nuts and the lower bumper cover fasteners. To remove the bumper cover from the vehicle, slide it rearward using blankets or padding to shield the paint if you are alone. Bumper reinforcement can be removed as needed. To install, reverse the removal order.