×
- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Mitsubishi Parts
My Garage
My Account
Cart
Genuine Mitsubishi Brake Shoe Set
Brake Shoe- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
9 Brake Shoe Sets found
Mitsubishi Brake Shoes Part Number: 4800A089
$46.63 MSRP: $64.77You Save: $18.14 (29%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Shoe Set, Rear Brake; Parking Brake Shoes; Drum Brake Shoe; Brake Shoe Set; Shoes
Mitsubishi Brake Shoes Part Number: MN161157
$48.96 MSRP: $68.01You Save: $19.05 (29%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Shoe Set, Rear Brake; Parking Brake Shoes; Brake Shoe Set; Shoes
Mitsubishi Brake Shoes Part Number: 4800A092
$48.96 MSRP: $68.01You Save: $19.05 (29%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Shoe Set, Rear Brake; Parking Brake Shoes; Drum Brake Shoe; Brake Shoe Set; Shoes
Mitsubishi Parking Brake Shoes Part Number: 4800A022
$48.96 MSRP: $68.01You Save: $19.05 (29%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Shoe Set, Rear Brake; Parking Brake Shoe; Brake Shoe Set; Brake Shoes; Shoes
Mitsubishi Brake Shoes Part Number: 4600A350
$51.49 MSRP: $71.53You Save: $20.04 (29%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Shoe Set, Rear Brake; Parking Brake Shoes; Drum Brake Shoe; Brake Shoe Set; Rear Shoes
Mitsubishi Brake Shoes Part Number: MB950212
$52.15 MSRP: $72.43You Save: $20.28 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Shoe Set, Rear Brake; Parking Brake Shoes; Parking Brake Shoe; Brake Shoe Set; Parking Brake; Shoes
Mitsubishi Brake Shoes Part Number: 4600A028
$43.30 MSRP: $59.99You Save: $16.69 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Shoe Set, Rear Brake; Parking Brake Shoes; Drum Brake Shoe; Brake Shoe Set; Shoes
Mitsubishi Shoes Part Number: MN150861
$70.73 MSRP: $98.23You Save: $27.50 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Shoe Set, Rear Brake; Parking Brake Shoes; Parking Brake Shoe; Brake Shoe Set
Mitsubishi Shoes Part Number: 4800A095
$73.49 MSRP: $102.07You Save: $28.58 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Shoe Assembly, Rear Brake Primary; Parking Brake Shoes; Brake Shoe Set
Mitsubishi Brake Shoe Set
The Mitsubishi Brake Shoe Set utilizes hydraulic pressure to create a smooth and reliable braking force, giving the driver confidence every time they press the brake pedal. Throughout the broader Mitsubishi range, there is over a century of craftsmanship, together with innovative ideas such as an MIVEC variable timing engine, Super All Wheel Control for grip, and friendly technology including cruise control and smartphone links that make travels simple and safe. The automaker is exploring fuel cell drives and hybrid systems to reduce fuel consumption. However, it ensures that the controls remain simple to operate for every age. Mitsubishi vehicles are of rugged build quality and have extensive experience to tackle city roads and rough tracks, all while being comfortable and efficient for everyday use. Similar to the previously discussed brake shoes, the Brake Shoe Set consists of two curved steel shoes lined with tough friction material that press outward against the inside of the drum whenever brake fluid moves the wheel cylinder pistons. As the linings wear, an internal self-adjuster ensures the shoes remain at the optimal distance from the drum, allowing for steady pedal feel without additional servicing. Once you release the brake pedal, the return springs pull the shoes back for clearance. The assembly also links to the parking mechanism to hold the vehicle in position when parked. This makes the Brake Shoe Set a durable partner for any Mitsubishi for life.
Pick genuine OEM Brake Shoe Set if you want superb performance and durability that lasts. Mitsubishi builds that using high-grade materials and official factory techniques to meet very strict standards. This means you get parts you can actually trust for your daily drive. Finding the right parts is simple in the massive stock of genuine inventory. You can stop guessing if a part will fit or hold up. You will love the low prices, dependable service and the real manufacturer's warranty on Mitsubishi Brake Shoe Set. Order today and the store will ship your brand-new items to your door as fast as possible.
Mitsubishi Brake Shoe Set Parts Questions & Experts Answers
- Q: How should brake pads and a Brake Shoe Set containing asbestos be handled during inspection and replacement in disc brakes on Mitsubishi Diamante?A:Because they contain asbestos, which causes cancer, brake pads and shoes should not be cleaned using compressed air or inhaled dust. During inspection, first remove the brake drum. Measure the wear of the brake lining in the most worn area. The service limit for replacement is set at 0.039 in. (no context to paraphrase). It is advised to disassemble or assemble only one side of the drum brakes for reference. If you discover that a shoe and lining assembly component is below the limit, then replace both the left and right side assemblies as a set to prevent pulling on braking. Examine the sliding condition of wheel-cylinder piston in case of thickness difference of left and right assembly more than significant value. To remove the tire and wheel assembly and install the new wheel bearings, you must safely raise and support the vehicle. Then, take off the tire and note the location of all springs and clips so you put them back on properly. Upon unraveling the brake drum, detach the parking brake cable and meticulously clean the backing plate, ensuring smooth operation of the backing plate bosses. Using lithium-based grease, lubricate the necessary areas. Clean and dry all other parts then put anti-seize on the star wheel threads before transferring parts to the new shoes. In reverse order, reconnect the parking brake arm, install the shoes on the backing plate, and install the hardware. Before installing the new wheel bearing self-locking nut and adjusting the rear brake shoes, preadjust the shoes for a light drag with the drum. For the Galant and 1993 to 2000 Mirage models, the processes for rear wheel and drum removal, spring and shoe removal are similar. Ensure proper installation of the parking brake lever and adjuster assembly. While driving and applying the parking brake, the rear brakes automatically adjust but manual adjustments are only needed when you replace the shoes or hardware. In order to adjust, take the brake drum apart, clean any dust, and measure the inside diameter of the drum. Next, adjust the shoes to the same diameter as the inside with the help of a brake adjustment gauge. Finally, refit back the drum.
- Q: How to remove and install Brake Shoe Set components in praking brake on Mitsubishi Mirage?A:Begin the removal procedure of 1994-00 Galant and 1992-96 Diamante components by raising the vehicle and supporting it using jackstands. Next, take off the caliper assembly and the rear brake rotor, along with disassembling and assembling the drum brakes one side at a time, as a reference. Next, take off the front and rear shoe-to-anchor springs, adjuster wheel spring and the adjuster. Next, remove the strut and strut return spring, followed by shoe hold-down cup, spring, and pin, then shoe and lining assemble. Take away the clips & retaining bolts for removal of cables. To install the wheels, reversal of the removal steps must be adopted. The adjuster must be positioned properly. The shoe adjusting bolt of the left wheel must face the front and that of the right wheel must face the rear. The load on each shoe-to-anchor spring is different because it is painted on spring. The procedure for a 1997-00 Diamante begins in a like manner, as the vehicle is raised and the caliper assembly and rear brake rotor removed. Next, the shoe hold-down spring retaining screw and shoe hold-down spring are removed and then the shoe assembly is taken from the backing plate. Installation is the reverse of removal. To adjust, disconnect floor console, free lever and back off cable adjuster locknut, see Figure 6. Get the vehicle elevated, safely support it, and remove the wheel. Subsequently, remove the hole plug in the brake rotor. Detach the brake caliper without disconnecting the fluid line and then use a prybar to adjust the self-adjuster wheel until the rotor will not turn. Reverse the position of the adjuster to five notches in the opposite direction. Turn the rotor with finger pressure, ensuring it spins freely (with slight drag). Reinstall the caliper and check operation.
Related Mitsubishi Parts
Mitsubishi ABS Sensor
Mitsubishi ABS Pump And Motor Assembly
Mitsubishi Axle Bearing Lock Rings
Mitsubishi Brake Caliper Bracket
Mitsubishi Brake Caliper Piston
Mitsubishi Brake Drum
Mitsubishi Brake Dust Shields
Mitsubishi Hydraulic Hose
Mitsubishi Parking Brake Cable
Mitsubishi Parking Brake Shoes
Mitsubishi Wheel Cylinder
Mitsubishi Wheel Stud