How to remove and install front Car Mirror, Door Lock, Door Lock Cylinder, Exterior Door Handle, Interior Door Handle and Window Regulator on Mitsubishi Lancer?

To remove / install the interior handles, trim panel and sealing sheet on CE models, with the regulator handle engage the washer is pushed away. Then withdraw the handle retaining clip with a wire hook, and remove the handle and washer. For power windows, remove the retaining screw within the pull handle. Carefully prise the switch panel from the door trim using a cloth-covered screwdriver. Disconnect the wiring and withdraw the switch panel. On the passenger's side, it's not necessary to remove this. After that, take out the retaining screw in the pull handle cavity and pull out the pull handle, then take out the retaining screw from the inner handle trim and pull out the trim. With utmost care, remove the cover from the screw at the front of the door trim. Then undo the screw. Take note that for a sedan model, there's another screw at the back of the trim above the door lock. To remove the trim panel, grasp its lower outside edge and pull it away from the door to disengage the retaining clips. Next, lift the trim panel up and withdraw it. If working on the passenger's side of a model with power windows, disconnect power window switch wiring before removing trim panel. After removing the retaining screws, the pull handle bracket is withdrawn. After that, remove the retaining screws of the interior handle and carefully peel off the plastic sheet from the door by cutting the sealant. If required, feed the wiring connector through and then remove the sealing sheet from the door. Store it flat and with the sealant-side facing up. If necessary, release the clips that hold the control rods to the interior handle. Remove the handle. The process of installation is just the reverse of that of removal and entails ensuring that the sealing sheet is correctly positioned, the sealant remains in operable condition, replacing any damaged trim panel retaining clips, and tightening all screws securely. The CG and CH models start the same way: the switch panel and pull handle are removed. Next, the interior handle trim and the trim panel are removed. If the model is equipped with power windows, the power window switch wiring must be disconnected. The window glass removal entails positioning of the glass to expose the retaining screws, temporally installing the window regulator handle or connecting of power window switch wiring so the glass can be moved as required, loosening of screws retaining the glass to the regulator slide, tilting the glass up and by maneuvering it through the door opening. To install the window, one must follow the steps in reverse to ensure it is seated properly and operates properly before putting the sealing sheet and trim panel back on. To service each window regulator, remove the trim panel, sealing sheet, window glass, if applicable disconnect the wiring of power window motor, if applicable remove the retaining bolts and move out the regulator assembly from the door and lubricate the sliding surfaces before refitting. Removing the exterior handle and lock cylinder requires that the window (which we can assume is the window of a car) be raised. Subsequently, the trim panel must first be removed, control rods disconnected, and the handle and lock cylinder removed. With everything on the right place, the exterior handle and lock cylinder will operate properly. The door lock removal consists of disconnecting control rods and wiring;after removing retaining screws grease sliding parts before reinstalling. Mark the position of the lock striker, remove retaining screw, and reinstall an aligned position. To renew mirror glass, adjust mirror and disengage spring or clips if necessary, next remove mirror cover and the surrounding panel if applicable, disconnect power mirror wiring, remove retaining screws or nuts, finally reinstall and test mirror operation.

Genuine Mitsubishi Door Lock Cylinder

Door Lock Cylinder Tumbler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

29 Door Lock Cylinders found

View related parts
Mitsubishi Lock & Cylinder Part Number: 6370A190
$68.05 MSRP: $94.52
You Save: $26.47 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Tailgate Lock; Trunk Lock Cylinder; Door Lock Cylinder; Lift Support; Lock Cylinder
Fits the following Mitsubishi Models:
- Outlander | 2005-2006 | LS, Limited, SE, XLS | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lock Cylinder Part Number: 6370A204
$68.76 MSRP: $95.50
You Save: $26.74 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Trunk Lid Lock; Trunk Lock Cylinder; Door Lock Cylinder
Fits the following Mitsubishi Models:
- Lancer | 2005-2007 | ES, OZ Rally, Ralliart, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lock Cylinder, Driver Side Part Number: MR555511
$69.78 MSRP: $96.92
You Save: $27.14 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Front Door Lock, L; Door Lock Cylinder
- Position: Driver Side
Fits the following Mitsubishi Models:
- Montero | 2001-2006 | Limited, XLS | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Lock Cylinder Part Number: 6370A864
$72.01 MSRP: $100.02
You Save: $28.01 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Trunk Lid Lock; Trunk Lock Cylinder; Door Lock Cylinder
Fits the following Mitsubishi Models:
- Lancer | 2008-2017 | DE, ES, Evolution GSR, Evolution MR, Evolution MR Touring, Evolution SE, GT, GTS, Ralliart, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lock Cylinder, Driver Side Part Number: 6370B677
$73.81 MSRP: $102.52
You Save: $28.71 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Front Door Lock; Door Lock Cylinder
- Position: Driver Side
Fits the following Mitsubishi Models:
- Mirage | 2017-2024 | BE, Black Edition, Carbonite Edition, ES, GT, LE, RF, SE | 3 Cyl 1.2 L GAS
- Mirage G4 | 2017-2024 | BE, Carbonite Edition, ES, LE, RF, SE | 3 Cyl 1.2 L GAS
View related parts
Mitsubishi Lock Cylinder, Driver Side Part Number: 6370B021
$74.29 MSRP: $103.18
You Save: $28.89 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Front Door Lock, L; Door Lock Cylinder; Cylinder & Keys
- Position: Driver Side
Fits the following Mitsubishi Models:
- Lancer | 2008-2017 | DE, ES, ES Sportback, Evolution GSR, Evolution MR, Evolution MR Touring, Evolution SE, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Outlander | 2007-2013 | ES, GT, LS, SE, XLS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mitsubishi Lock Cylinder, Driver Side Part Number: 6370B451
$77.30 MSRP: $107.36
You Save: $30.06 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Front Door Lock, L; Door Lock Cylinder; Cylinder & Keys
- Position: Driver Side
- Replaces: 6370B767
Fits the following Mitsubishi Models:
- Outlander Sport | 2011-2025 | BE, ES, GT, GT Special Edition, LE, Ralliart, S, SE, SE Special Edition, SEL, SP, Trail Edition | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lock Cylinder Part Number: 6369A164
$96.23 MSRP: $133.65
You Save: $37.42 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Front Door Lock; Door Lock Cylinder
Fits the following Mitsubishi Models:
- Mirage | 2017-2024, 2014-2015 | BE, Black Edition, Carbonite Edition, DE, ES, GT, LE, RF, SE | 3 Cyl 1.2 L GAS
- Mirage G4 | 2017-2024 | BE, Carbonite Edition, ES, LE, RF, SE | 3 Cyl 1.2 L GAS
View related parts
Mitsubishi Lock Cylinder, Driver Side Part Number: MR555355
$44.45 MSRP: $61.73
You Save: $17.28 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Front Door Lock, L; Door Lock Cylinder
- Position: Driver Side
Fits the following Mitsubishi Models:
- Lancer | 2002-2004 | ES, Evolution, LS, OZ Rally | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Lock Cylinder, Driver Side Part Number: 6370A191
$47.62 MSRP: $66.13
You Save: $18.51 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Front Door Lock, L; Door Lock Cylinder
- Position: Driver Side
Fits the following Mitsubishi Models:
- Lancer | 2005-2006 | Evolution, Evolution MR, Evolution RS, Evolution SE | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Lock Cylinder Part Number: MR325988
$51.82 MSRP: $71.96
You Save: $20.14 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Tailgate Lock; Trunk Lock Cylinder; Door Lock Cylinder; Lift Support; Cylinder & Keys
Fits the following Mitsubishi Models:
- Montero Sport | 1997-2004 | ES, LS, Limited, XLS, XS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
Mitsubishi Lock Cylinder, Passenger Side Part Number: 6370A632
$66.70 MSRP: $92.63
You Save: $25.93 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Front Door Lock, R; Door Lock Cylinder
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Lancer | 2008-2017 | DE, ES, ES Sportback, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Cylinder & Keys, Driver Side Part Number: 6370B549
$124.23 MSRP: $168.33
You Save: $44.10 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Front Door Lock, L; Door Lock Cylinder; Lock Cylinder
- Position: Driver Side
Fits the following Mitsubishi Models:
- Outlander | 2014-2020 | ES, GT, LE, SE, SEL, SP | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander PHEV | 2018-2020 | GT, SEL | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Mitsubishi Lock Cylinder, Driver Side Part Number: 6369A158
$130.75 MSRP: $177.17
You Save: $46.42 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Front Door Lock, L; Door Lock Cylinder; Cylinder & Keys
- Position: Driver Side
Fits the following Mitsubishi Models:
- Outlander | 2014-2020 | ES, GT, LE, SE, SEL, SP | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander PHEV | 2018-2022 | GT, LE, SEL | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Mitsubishi Lock Cylinder Assembly, Driver Side Part Number: 6370C393
$155.18 MSRP: $210.27
You Save: $55.09 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Front Door Lock, L; Door Lock Cylinder; Lock Cylinder
- Position: Driver Side
Fits the following Mitsubishi Models:
- Eclipse Cross | 2022-2025, 2018-2020 | Black Edition, ES, LE, Ralliart, SE, SE Special Edition, SEL, SEL Special Edition, SEL Touring, SP | 4 Cyl 1.5 L GAS
View related parts
Mitsubishi Cylinder & Keys, Driver Side Part Number: 6370A407
$239.60 MSRP: $324.67
You Save: $85.07 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Front Door Lock; Door Lock Cylinder; Lock Cylinder
- Position: Driver Side
Fits the following Mitsubishi Models:
- Eclipse | 2006-2009 | GS, GT, SE, Spyder GS, Spyder GT | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Cylinder & Keys, Passenger Side Part Number: MR325990
$32.98 MSRP: $43.28
You Save: $10.30 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Front Door Lock, R; Door Lock Cylinder; Lock Cylinder
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Montero Sport | 1997-2002 | ES, LS, Limited, XLS, XS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
Mitsubishi Cylinder & Keys, Driver Side Part Number: MR325991
$35.66 MSRP: $46.81
You Save: $11.15 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Front Door Lock, L; Door Lock Cylinder; Lock Cylinder
- Position: Driver Side
Fits the following Mitsubishi Models:
- Montero Sport | 1997-2004 | ES, LS, Limited, XLS, XS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
Mitsubishi Lock Cylinder Part Number: MR286178
$40.37 MSRP: $52.99
You Save: $12.62 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Trunk Lid Lock; Trunk Lock Cylinder; Door Lock Cylinder; Cylinder & Keys
Fits the following Mitsubishi Models:
- Lancer | 2002-2004 | ES, Evolution, LS, OZ Rally | 4 Cyl 2.0 L GAS
- Mirage | 1997-2002 | DE, ES, LS | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L GAS
View related parts
Mitsubishi Lock Cylinder, Passenger Side Part Number: MR555356
$43.90 MSRP: $57.62
You Save: $13.72 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Front Door Lock, R; Door Lock Cylinder
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Lancer | 2002-2004 | ES, Evolution, LS, OZ Rally, Ralliart, Sportback, Sportback Ralliart | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

| Page 1 of 2 |Next >

1-20 of 29 Results

Mitsubishi Door Lock Cylinder

Mitsubishi Door Lock Cylinder provides every driver with an easy way to lock or unlock the cabin with a quick turn of the key. Thus, travelling every day becomes safer and easier. Mitsubishi designs its cars with the idea that technology should help simplify your life. Brilliant MIVEC engines partner up with efficient plug-in hybrids while Super All Wheel Control maintains steady grip on damp or gravel roads. Mitsubishi aims for progress that everyday owners can trust, as indicated by the brand's trials with cleaner powertrains. There are smooth cruise control, straightforward smartphone links, and sensors to help. The lineup features strong body structures, well-appointed cabins, and a solid value that inspires everyday confidence. The same reasoning shows itself in the Door Lock Cylinder of each front door. Behind the key slot on the exterior, the Mitsubishi Door Lock Cylinder houses a number of small tumblers that fit the key. As the key slides in and you turn it, the tumblers align allowing the cylinder to rotate and then move the latch linkage that locks or unlocks the door. A device that doesn't require electricity will remain functional if the remote battery fails or cold temperatures drain the battery. An unused, clean, and free Door Lock Cylinder ensures smooth entry, prevents keys from jamming, and blocks unwanted hands from the cabin.

Pick genuine OEM Door Lock Cylinder if you want superb performance and durability that lasts. Mitsubishi builds that using high-grade materials and official factory techniques to meet very strict standards. This means you get parts you can actually trust for your daily drive. Finding the right parts is simple in the massive stock of genuine inventory. You can stop guessing if a part will fit or hold up. You will love the low prices, dependable service and the real manufacturer's warranty on Mitsubishi Door Lock Cylinder. Order today and the store will ship your brand-new items to your door as fast as possible.

Mitsubishi Door Lock Cylinder Parts Questions & Experts Answers

Lock Cylinder, Driver Side
6370A191
Q: How to remove and install front Car Mirror, Door Lock, Door Lock Cylinder, Exterior Door Handle, Interior Door Handle and Window Regulator on Mitsubishi Lancer?
A:
To remove / install the interior handles, trim panel and sealing sheet on CE models, with the regulator handle engage the washer is pushed away. Then withdraw the handle retaining clip with a wire hook, and remove the handle and washer. For power windows, remove the retaining screw within the pull handle. Carefully prise the switch panel from the door trim using a cloth-covered screwdriver. Disconnect the wiring and withdraw the switch panel. On the passenger's side, it's not necessary to remove this. After that, take out the retaining screw in the pull handle cavity and pull out the pull handle, then take out the retaining screw from the inner handle trim and pull out the trim. With utmost care, remove the cover from the screw at the front of the door trim. Then undo the screw. Take note that for a sedan model, there's another screw at the back of the trim above the door lock. To remove the trim panel, grasp its lower outside edge and pull it away from the door to disengage the retaining clips. Next, lift the trim panel up and withdraw it. If working on the passenger's side of a model with power windows, disconnect power window switch wiring before removing trim panel. After removing the retaining screws, the pull handle bracket is withdrawn. After that, remove the retaining screws of the interior handle and carefully peel off the plastic sheet from the door by cutting the sealant. If required, feed the wiring connector through and then remove the sealing sheet from the door. Store it flat and with the sealant-side facing up. If necessary, release the clips that hold the control rods to the interior handle. Remove the handle. The process of installation is just the reverse of that of removal and entails ensuring that the sealing sheet is correctly positioned, the sealant remains in operable condition, replacing any damaged trim panel retaining clips, and tightening all screws securely. The CG and CH models start the same way: the switch panel and pull handle are removed. Next, the interior handle trim and the trim panel are removed. If the model is equipped with power windows, the power window switch wiring must be disconnected. The window glass removal entails positioning of the glass to expose the retaining screws, temporally installing the window regulator handle or connecting of power window switch wiring so the glass can be moved as required, loosening of screws retaining the glass to the regulator slide, tilting the glass up and by maneuvering it through the door opening. To install the window, one must follow the steps in reverse to ensure it is seated properly and operates properly before putting the sealing sheet and trim panel back on. To service each window regulator, remove the trim panel, sealing sheet, window glass, if applicable disconnect the wiring of power window motor, if applicable remove the retaining bolts and move out the regulator assembly from the door and lubricate the sliding surfaces before refitting. Removing the exterior handle and lock cylinder requires that the window (which we can assume is the window of a car) be raised. Subsequently, the trim panel must first be removed, control rods disconnected, and the handle and lock cylinder removed. With everything on the right place, the exterior handle and lock cylinder will operate properly. The door lock removal consists of disconnecting control rods and wiring;after removing retaining screws grease sliding parts before reinstalling. Mark the position of the lock striker, remove retaining screw, and reinstall an aligned position. To renew mirror glass, adjust mirror and disengage spring or clips if necessary, next remove mirror cover and the surrounding panel if applicable, disconnect power mirror wiring, remove retaining screws or nuts, finally reinstall and test mirror operation.