How should headlights be aimed correctly to avoid blinding oncoming drivers and ensure optimal visibility on the road on Mitsubishi Galant?

To prevent blinding drivers and enhance visibility driving, you should aim the headlights correctly. Checking the aim is recommended once every 12 months or if a new headlight is installed or front-end body work is done. The adjustment process serves as a temporary support until a professional can do it correctly. Certain models have a horizontal adjustment screw towards the end and a vertical screw towards the end of the headlight housing that can be turned with a Phillips screwdriver, but from 2002 this model only has vertical adjustment. A simple method of adjustment uses masking tape, a blank wall and a level floor. To start, place masking tape on the wall vertically at the centreline of the vehicle and at the centreline of each headlight bulbs. Thereafter, with the vehicle parked few inches away, place a horizontal tape line in reference to the centreline of all the headlights; The car must be parked 25 feet from the wall, on a level ground, with a half-full tank, and no heavy load. The high-intensity zone for low beam adjustment needs to be set two inches below the horizontal line and two inches to the side of the headlight vertical line. The side has to be facing away from oncoming traffic. One can use the vertical screw to raise or lower the beam. Similarly, the horizontal screw can be used for moving the beam left or right. When the high beam is on, the high-intensity zone should be centered just below the horizontal line. Low beams are used more often and are important for safety. It is best to have the service department of a dealer or service station adjust the headlights as soon as possible.

Genuine Mitsubishi Galant Headlight

Headlamp

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Headlights found

View related parts
Mitsubishi Galant Headlamp Assembly, Passenger Side Part Number: 8301C400
$237.43 MSRP: $335.35
You Save: $97.92 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp Assembly, Right-Hand; Daytime Running Lights; Headlight; Composite Assembly
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2012 Mitsubishi Galant | ES, FE, SE | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Galant Headlamp Assembly, Driver Side Part Number: 8301C399
$237.43 MSRP: $335.35
You Save: $97.92 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp Assembly, Left-Hand; Daytime Running Lights; Headlight; Composite Assembly
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2012 Mitsubishi Galant | ES, FE, SE | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Galant Composite Assembly, Passenger Side Part Number: MR991160
$359.38 MSRP: $507.60
You Save: $148.22 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp Assembly, Right-Hand; Daytime Running Lights; Headlight; Headlamp Assembly
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2004-2009 Mitsubishi Galant | DE, ES, GTS, LS, Ralliart, SE, Sport Edition, Sport V6 | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Galant Composite Assembly, Driver Side Part Number: MR991159
$440.28 MSRP: $621.87
You Save: $181.59 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Body, Headlamp, Left-Hand; Daytime Running Lights; Headlight; Headlamp Assembly
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2004-2009 Mitsubishi Galant | DE, ES, GTS, LS, Ralliart, SE, Sport Edition, Sport V6 | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Galant Headlamp Assembly, Driver Side Part Number: MR972843
$112.32 MSRP: $156.00
You Save: $43.68 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp Kit, Left-Hand; Daytime Running Lights; Headlight Assembly; Headlamp - Left; Headlight; Headlamp; Composite Assembly
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2002-2003 Mitsubishi Galant | DE, ES, GTZ, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mitsubishi Galant Composite Assembly, Passenger Side Part Number: MR991162
$127.92 MSRP: $173.33
You Save: $45.41 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp Assembly, Right-Hand; Daytime Running Lights; Headlight Assembly; Headlamps; Headlight; Headlamp Assembly
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2004-2010 Mitsubishi Galant | DE, ES, GTS, LS, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Galant Composite Assembly, Driver Side Part Number: MR991161
$127.92 MSRP: $173.33
You Save: $45.41 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Body, Headlamp, Left-Hand; Daytime Running Lights; Headlight Assembly; Headlamps; Headlight; Headlamp Assembly
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2004-2010 Mitsubishi Galant | DE, ES, GTS, LS, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Galant Headlamp Assembly, Driver Side Part Number: 8301A559
$232.47 MSRP: $315.00
You Save: $82.53 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp Assembly, Left-Hand; Daytime Running Lights; Headlight; Composite Assembly
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2009-2010, 2007 Mitsubishi Galant | GTS, SE, Sport Edition, Sport V6 | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Galant Composite Headlamp, Passenger Side Part Number: MR991156
Product Specifications
- Other Name: Body, Headlamp, Right-Hand; Headlight; Lens & Housing
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2004-2009 Mitsubishi Galant | DE, ES, GTS, LS, Ralliart, SE, Sport Edition, Sport V6 | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS

Mitsubishi Galant Headlight

The Mitsubishi Galant Headlight is the lighting unit that allows the driver to see the road clearly ahead at night while also allowing other ones to see the car. The Headlight assembly is designed for the front end of the body and features a modern composite construction that blends smoothly with exterior contours to achieve better aerodynamics and styling. The integrated housing can accommodate the main illumination source along with the turn signal or parking lamps, thus making it a multipurpose module. This internal lighting hardware is shielded by a clear plastic lens. However, with exposure to the sun, airborne particles, and roadway elements, this lens will become hazy, opaque, or abraded over a period of time. This can diminish the clarity of light until the Headlight is refurbished or replaced. Inside the cell, a system of bulbs that directs the beam forward through reflectors or projector elements produces light that bundles brightness to where it is needed and does not blind other traffic. Even if there are many types of lighting technologies in the industry, the basic operation of the Mitsubishi Galant unit remains unchanged. It helps in giving visibility on the road after sunset. In addition to that, it also helps other vehicles detect presence. As the single composite structure is shaped to meet the contours of a Mitsubishi model, each Galant replacement must match the original dimensions in order to fit securely, seal out moisture, and project light properly. The Mitsubishi Galant Headlight lens surface should be checked regularly to keep it free from dirt and moisture.

OEM Headlight can boast superior quality and long-term durability. Each part meets strict factory specs and passes careful checks in production. So you'll get Headlight with long-lasting strength and an exact fit. If you need OEM Mitsubishi Galant Headlight, the online store is the ideal place. The store carry a wide range of genuine Mitsubishi Galant parts at the highly competitive prices. You'll enjoy a simple and no-hassle shopping experience. You'll get unbeatable prices and fast delivery service. You'll get the manufacturer's warranty and a straightforward return policy. Shop with confidence and keep your car in top condition.

Mitsubishi Galant Headlight Parts Questions & Experts Answers

Headlamp Assembly, Driver Side
MR972843
Q: How should headlights be aimed correctly to avoid blinding oncoming drivers and ensure optimal visibility on the road on Mitsubishi Galant?
A:
To prevent blinding drivers and enhance visibility driving, you should aim the headlights correctly. Checking the aim is recommended once every 12 months or if a new headlight is installed or front-end body work is done. The adjustment process serves as a temporary support until a professional can do it correctly. Certain models have a horizontal adjustment screw towards the end and a vertical screw towards the end of the headlight housing that can be turned with a Phillips screwdriver, but from 2002 this model only has vertical adjustment. A simple method of adjustment uses masking tape, a blank wall and a level floor. To start, place masking tape on the wall vertically at the centreline of the vehicle and at the centreline of each Headlight Bulbs. Thereafter, with the vehicle parked few inches away, place a horizontal tape line in reference to the centreline of all the headlights; The car must be parked 25 feet from the wall, on a level ground, with a half-full tank, and no heavy load. The high-intensity zone for low beam adjustment needs to be set two inches below the horizontal line and two inches to the side of the headlight vertical line. The side has to be facing away from oncoming traffic. One can use the vertical screw to raise or lower the beam. Similarly, the horizontal screw can be used for moving the beam left or right. When the high beam is on, the high-intensity zone should be centered just below the horizontal line. Low beams are used more often and are important for safety. It is best to have the service department of a dealer or service station adjust the headlights as soon as possible.