My Garage
Cart

Genuine Mitsubishi Lancer Blower Motor Resistor

Heater Blower Motor Resistor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blower Motor Resistors found

  • Mitsubishi Lancer Blower Motor Resistor - 7802A006
    Diagram for Mitsubishi Lancer Blower Motor Resistor - 7802A006
    View related parts

    Mitsubishi Lancer Resistor Part Number: 7802A006

    $75.10 MSRP: $104.30
    You Save: $29.20 (28%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Transistor, Heater Control; HVAC Blower Motor Resistor; Blower Motor Resistor; Transistor
    • Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
    Fits the following Vehicles:
    • 2008-2017 Mitsubishi Lancer | DE, ES, ES Sportback, Evolution GSR, Evolution MR, Evolution MR Touring, Evolution SE, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
  • Mitsubishi Lancer Blower Motor Resistor - MR568591
    Diagram for Mitsubishi Lancer Blower Motor Resistor - MR568591
    View related parts

    Mitsubishi Lancer Resistor Part Number: MR568591

    $116.18 MSRP: $161.37
    You Save: $45.19 (28%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Resistor, Heater; Blower Motor Resistor
    • Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
    Fits the following Vehicles:
    • 2002-2007 Mitsubishi Lancer | ES, Evolution, Evolution MR, Evolution RS, Evolution SE, LS, OZ Rally, Ralliart, SE, Sportback, Sportback Ralliart | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Mitsubishi Lancer Blower Motor Resistor

Mitsubishi Lancer Blower Motor Resistor controls fan speeds by controlling how much electrical power is sent to the cabin blower motor. This then changes how much heated or cooled air comes through the vents. The Blower Motor Resistor is the essential speed-setting device that allows occupants to quickly increase airflow on chilly mornings to clear fogged windows or raise air-conditioning on hot days when the vehicle has been sitting in the sun. The Blower Motor Resistor assembly is applied in the blower motor control system of a vehicle. This component connects the fan switches from the dash to the blower motor. It is a device that consists of an electronic control module along with dedicated wires. The resistor is adapted to Mitsubishi specifications, ensuring connector and mounting point compatibility with Lancer wiring. If the Mitsubishi unit does its job correctly, the environment inside the Lancer will be nice. By employing various resistance values in the circuit, it is possible to achieve three different motor speeds, thus enabling the fan to operate at low, medium, or high output as required. If the resistor, wiring, or the electronic board it is connected to fail, the motor may become jammed at a speed or stop altogether, leaving the airflow beyond the control of the driver. A malfunctioning Blower Motor Resistor can cause the Mitsubishi Lancer to lose fan settings. The Blower Motor Resistor is not available in alternate versions and is therefore specified as a single standard. This design maintains reliable interior climate operation.

OEM Blower Motor Resistor can boast superior quality and long-term durability. Each part meets strict factory specs and passes careful checks in production. So you'll get Blower Motor Resistor with long-lasting strength and an exact fit. If you need OEM Mitsubishi Lancer Blower Motor Resistor, the online store is the ideal place. The store carry a wide range of genuine Mitsubishi Lancer parts at the highly competitive prices. You'll enjoy a simple and no-hassle shopping experience. You'll get unbeatable prices and fast delivery service. You'll get the manufacturer's warranty and a straightforward return policy. Shop with confidence and keep your car in top condition.

Mitsubishi Lancer Blower Motor Resistor Parts Questions & Experts Answers

  • Q: How to remove and install the Fan Motor and Blower Motor Resistor on Mitsubishi Lancer?
    A:
    Removing and installing the Blower Motor Resistor, first of all, disconnection of the hose and wiring of the Blower Motor Resistor, then loosening the screws securing the Blower Motor Resistor and removing it out of the air intake housing. To install, go through the removal process in reverse, making sure that the screws used to fit the retainer are tight and the wiring of the Blower Motor Resistor is correct. To install and take out theBlower Motor Resistor, start by taking out the lower glove compartment retaining screws, the glove compartment door, and deal with the glove compartment by maneuvering it out of the dashboard. Then unscrew the wiring of the Blower Motor Resistor, lift the retaining screws and pull out the resistor. For installation, reverse the removal procedure, making sure the screws are securely tightened and the wiring is properly connected.

Related Mitsubishi Lancer Parts