What precautions should be taken when removing and installing components near the airbag module in the Center Console on fitted with an airbag on Mitsubishi Lancer?

To remove and install, extreme care is necessary when working near the airbag module located forward of the centre console (in models fitted with an airbag). Start by taking out the retaining screws in the storage compartment in the rear console. To remove the rear console, raise the front of the rear console to disengage the retaining clips with the handbrake on. For CE models, detach the sound system and remove the surround panel. For CG and CH models, unscrew the back of the front console. On manual transaxle models, turn the shift lever knob in an anticlockwise direction to remove. Undo the retaining screws of CE models or the clips of CG and CH models from the front console and pull it out of the vehicle. On CE models, remove the screws holding the coin tray. On manual transaxle models remove the gear lever cover. Installation must be a reversal of the removal procedure. On CE models, fit the front console and tighten the retaining screws. On CG and CH models, check the clips are secure. If removed install the sound system and surround panel Ultimately, clip the rear console over the handbrake lever, which must clip into the front console. Finally, secure the retaining screws.

Genuine Mitsubishi Lancer Center Console

Floor Console Assembly

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Center Consoles found

View related parts
Mitsubishi Lancer Console Dark Gray Part Number: MR633547
$135.05 MSRP: $183.00
You Save: $47.95 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Console, Floor, Front; Center Console
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2002-2007 Mitsubishi Lancer | ES, Evolution, Evolution MR, Evolution RS, Evolution SE, LS, OZ Rally, Ralliart, SE, Sportback, Sportback Ralliart | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lancer Console Beige Part Number: 8011A370YA
$213.70 MSRP: $289.57
You Save: $75.87 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Console, Floor; Center Console
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2008-2017 Mitsubishi Lancer | DE, ES, ES Sportback, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lancer Console Beige Part Number: 8011A219YA
$214.70 MSRP: $290.92
You Save: $76.22 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Console, Floor, Rear; Center Console
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2008-2017 Mitsubishi Lancer | DE, ES, ES Sportback, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lancer Center Console Black Part Number: 8011A219XA
$216.68 MSRP: $293.60
You Save: $76.92 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Console, Floor, Rear; Console
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2008-2017 Mitsubishi Lancer | DE, ES, ES Sportback, Evolution GSR, Evolution MR, Evolution MR Touring, Evolution SE, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Mitsubishi Lancer Center Console

Mitsubishi Lancer Center Console is an inside storage compartment that stores daily needs in order and is easily accessible to the driver and passengers. It looks like a small box between the front seats, and items can be put in it like cash, smartphones, keys, or cigarettes so that they do not fall around during movement. A hinged lid and a latch permit repeated use and provide a fast access point but exert a normal load on the moving components. Should the hinge or latch become loose, opening and closing the compartment can be difficult, and a new component can restore smooth operation. Constant use, sunlight and exposure may also crack, fade and tear the surface of the surface making the cabin of a Mitsubishi Lancer look worn. One of the things that make the Lancer cabin clean and tidy is keeping the Center Console clean. Some units are more practical like cup holders or a cover to hide the valuables to increase the organizing aspect of the Center Console without modifying the basic storage aspect of the Center Console. The component fits in a central position which is applied in every trip, hence a clean and intact Center Console is comfortable and tidy to many of the interiors of Mitsubishi Lancer and thus offers the welcoming look expected in Mitsubishi passenger cabin.

OEM Center Console can boast superior quality and long-term durability. Each part meets strict factory specs and passes careful checks in production. So you'll get Center Console with long-lasting strength and an exact fit. If you need OEM Mitsubishi Lancer Center Console, the online store is the ideal place. The store carry a wide range of genuine Mitsubishi Lancer parts at the highly competitive prices. You'll enjoy a simple and no-hassle shopping experience. You'll get unbeatable prices and fast delivery service. You'll get the manufacturer's warranty and a straightforward return policy. Shop with confidence and keep your car in top condition.

Mitsubishi Lancer Center Console Parts Questions & Experts Answers

Console Dark Gray
MR633547
Q: What precautions should be taken when removing and installing components near the airbag module in the Center Console on fitted with an airbag on Mitsubishi Lancer?
A:
To remove and install, extreme care is necessary when working near the airbag module located forward of the centre console (in models fitted with an airbag). Start by taking out the retaining screws in the storage compartment in the rear console. To remove the rear console, raise the front of the rear console to disengage the retaining clips with the handbrake on. For CE models, detach the sound system and remove the surround panel. For CG and CH models, unscrew the back of the front console. On manual transaxle models, turn the shift lever knob in an anticlockwise direction to remove. Undo the retaining screws of CE models or the clips of CG and CH models from the front console and pull it out of the vehicle. On CE models, remove the screws holding the coin tray. On manual transaxle models remove the gear lever cover. Installation must be a reversal of the removal procedure. On CE models, fit the front console and tighten the retaining screws. On CG and CH models, check the clips are secure. If removed install the sound system and surround panel Ultimately, clip the rear console over the handbrake lever, which must clip into the front console. Finally, secure the retaining screws.