How to remove and install the Brake Master Cylinder on Mitsubishi Lancer?

In order to remove and install the master cylinder, you must first put a cover on the right-hand front mudguard. Take off the cover for the master cylinder reservoir. Remove the float and extract the brake fluid with a syringe while placing it in a container. Unplug the wiring of the master cylinder reservoir level sensor. For bidirectional manual transmission versions like those of CG and CH where a common clutch master cylinder is fitted, disconnect the reservoir hose from that on the brake master cylinder, blocking it against the entry of dirt and securing it to the firewall with the end elevated. Using a pipe spanner, remove the hydraulic pipes from the master cylinder body. Plug the ends of the pipes and the master cylinder openings to prevent dirt from entering, and to retain as much fluid as possible. Take off the master cylinder retaining nuts and remove the master cylinder from the vehicle. If any brake fluid spills onto the paintwork, wash it off immediately with water as it is corrosive to paintwork. Do not depress the brake pedal or disturb the pushrod after removal or it will damage the brake booster. To install the parts, reverse the removal steps. If the master cylinder has been dismantled, fill the reservoir with clean brake fluid and pump the cylinder pistons until fluid emerges from the brake pipe apertures. Mount the master cylinder to the brake booster and tighten the retaining nuts and pipes to the specified torque settings. Finally, connect the wiring. Bleed the hydraulic brake system and, if necessary, the clutch system for the CG and CH manual transmission models. Ultimately, perform a road test to confirm brake functionality. It is more cost-effective to install a new or an exchange cylinder than to overhaul an original master cylinder assembly that is worn or leaking.

Genuine Mitsubishi Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Brake Master Cylinders found

View related parts
Mitsubishi Master Cylinder Part Number: MN113522
$317.13 MSRP: $447.92
You Save: $130.79 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Brake Master; Brake Master Cylinder
Fits the following Mitsubishi Models:
- Outlander | 2005-2006 | LS, Limited, SE, XLS | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Master Cylinder Part Number: 4625A021
$328.21 MSRP: $463.57
You Save: $135.36 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Brake Master; Brake Master Cylinder
Fits the following Mitsubishi Models:
- Lancer | 2005-2006 | Ralliart | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Master Cylinder Part Number: 4625A020
$348.48 MSRP: $492.20
You Save: $143.72 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Brake Master; Brake Master Cylinder
Fits the following Mitsubishi Models:
- Lancer | 2005-2006 | Ralliart | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Master Cylinder Part Number: 4625A539
$357.75 MSRP: $505.30
You Save: $147.55 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Brake Master; Brake Master Cylinder
Fits the following Mitsubishi Models:
- Outlander PHEV | 2018-2022 | GT, LE, SEL | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Mitsubishi Master Cylinder Part Number: MR527471
$357.94 MSRP: $505.57
You Save: $147.63 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Brake Master; Brake Master Cylinder
Fits the following Mitsubishi Models:
- Lancer | 2002-2007 | ES, LS, OZ Rally, SE | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Master Cylinder Part Number: 4625A571
$361.54 MSRP: $510.65
You Save: $149.11 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Brake Master; Brake Master Cylinder
Fits the following Mitsubishi Models:
- Outlander | 2022-2025 | Black Edition, ES, SE, SE Launch Edition, SEL, SEL Launch Edition | 4 Cyl 2.5 L GAS
View related parts
Mitsubishi Master Cylinder Part Number: 4625A243
$404.95 MSRP: $571.97
You Save: $167.02 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Brake Master; Brake Master Cylinder
Fits the following Mitsubishi Models:
- Lancer | 2008-2015 | Evolution GSR, Evolution MR, Evolution MR Touring, Evolution SE, Ralliart, Ralliart Sportback, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Master Cylinder Part Number: 4625A242
$437.11 MSRP: $617.38
You Save: $180.27 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Brake Master; Brake Master Cylinder
Fits the following Mitsubishi Models:
- Lancer | 2010-2015, 2008 | Evolution GSR, Evolution MR, Evolution MR Touring, Evolution SE | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Master Cylinder Part Number: 4625A439
$569.24 MSRP: $804.02
You Save: $234.78 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Brake MAS; Brake Master Cylinder
Fits the following Mitsubishi Models:
- Mirage | 2017-2024, 2014-2015 | BE, Black Edition, Carbonite Edition, DE, ES, GT, LE, RF, SE | 3 Cyl 1.2 L GAS
- Mirage G4 | 2017-2024 | BE, Carbonite Edition, ES, LE, RF, SE | 3 Cyl 1.2 L GAS
View related parts
Mitsubishi Master Cylinder Part Number: 4625A191
$115.00 MSRP: $159.72
You Save: $44.72 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Brake Master; Brake Master Cylinder
Fits the following Mitsubishi Models:
- Eclipse | 2010-2012 | GS, GS Sport, GT, SE, Spyder GS, Spyder GS Sport, Spyder GT, Spyder SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
- Galant | 2011-2012 | ES, FE, SE | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Master Cylinder Part Number: 4625A475
$361.97 MSRP: $497.94
You Save: $135.97 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Brake Master; Brake Master Cylinder
Fits the following Mitsubishi Models:
- Lancer | 2008-2009 | DE, ES, GTS | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Master Cylinder Part Number: 4625A419
$429.47 MSRP: $591.95
You Save: $162.48 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Brake Master; Brake Master Cylinder
Fits the following Mitsubishi Models:
- Outlander | 2014-2020 | ES, GT, LE, SE, SEL, SP | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mitsubishi Master Cylinder Part Number: 4625A027
$143.84 MSRP: $194.90
You Save: $51.06 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Brake Master; Brake Master Cylinder
Fits the following Mitsubishi Models:
- Eclipse | 2006-2009 | GS, GT, SE, Spyder GS, Spyder GT | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
- Galant | 2006-2010 | DE, ES, GTS, LS, Ralliart, SE, Sport Edition, Sport V6 | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Master Cylinder Part Number: 4625A421
$517.15 MSRP: $698.99
You Save: $181.84 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Brake Master; Brake Master Cylinder
Fits the following Mitsubishi Models:
- Eclipse Cross | 2022-2025, 2018-2020 | Black Edition, ES, LE, Ralliart, SE, SE Special Edition, SEL, SEL Special Edition, SEL Touring, SP | 4 Cyl 1.5 L GAS
- Outlander Sport | 2014-2025 | BE, ES, GT, GT Special Edition, LE, Ralliart, S, SE, SE Special Edition, SEL, SP, Trail Edition | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Master Cylinder Part Number: 4625A213
$430.22 MSRP: $577.67
You Save: $147.45 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Brake Master; Brake Master Cylinder
Fits the following Mitsubishi Models:
- Lancer | 2009-2015 | Ralliart, Ralliart Sportback | 4 Cyl 2.0 L GAS
- Outlander Sport | 2011-2013 | ES, LE, SE | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Master Cylinder Part Number: 4625A463
$444.07 MSRP: $592.63
You Save: $148.56 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Brake Master; Brake Master Cylinder
Fits the following Mitsubishi Models:
- Lancer | 2008-2017 | DE, ES, ES Sportback, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Outlander | 2007-2013 | ES, GT, LS, SE, XLS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mitsubishi Master Cylinder Part Number: 46010W180P
$313.76 MSRP: $443.17
You Save: $129.41 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Brake MAS; Brake Master Cylinder
Fits the following Mitsubishi Models:
- Outlander PHEV | 2023-2025 | ES, Platinum Edition, Ralliart, SE, SE Tech, SEL, SEL Premium, SEL Touring | 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)

Mitsubishi Brake Master Cylinder

The Mitsubishi Brake Master Cylinder is designed to generate balanced hydraulic pressure from the driver's pedal effort instantly. It provides every Mitsubishi model with strong, predictable vehicle stopping power with a vital safety backup should one circuit fail. For decades, Mitsubishi has focused on practical innovation that keeps motoring simple and enjoyable. Highlights include fuel-saving MIVEC engines, Super All Wheel Control that grips snow and gravel with confidence, user-friendly smartphone link displays, and plug-in hybrid options that stretch every liter of fuel. The firm was founded in shipping. It produced its first car in 1917. The company believes in dependable engineering. The design must work in real life. That places smart features in its cars, but they combine them with straightforward controls. These are so instinctive that new drivers take to them easily. It carries out continuous research into cleaner propulsion and basic safety sensors. At the core of this philosophy is hardware like the Brake Master Cylinder, which is a small cast iron or aluminum device with two pistons, seals, and springs that deliver fluid through dual circuits as the pedal moves. The bore is supplied by a fluid reservoir so no air can sneak in. The springs help pistons reset as soon as the driver lifts, and the twin-circuit design keeps one line active if the other leaks to allow control. Smooth stops, consistent pedal feel, and overall reliability expected from Mitsubishi are made possible by the way the Brake Master Cylinder applies consistent pressure to every caliper.

Pick genuine OEM Brake Master Cylinder if you want superb performance and durability that lasts. Mitsubishi builds that using high-grade materials and official factory techniques to meet very strict standards. This means you get parts you can actually trust for your daily drive. Finding the right parts is simple in the massive stock of genuine inventory. You can stop guessing if a part will fit or hold up. You will love the low prices, dependable service and the real manufacturer's warranty on Mitsubishi Brake Master Cylinder. Order today and the store will ship your brand-new items to your door as fast as possible.

Mitsubishi Brake Master Cylinder Parts Questions & Experts Answers

Master Cylinder
4625A020
Q: How to remove and install the Brake Master Cylinder on Mitsubishi Lancer?
A:
In order to remove and install the master cylinder, you must first put a cover on the right-hand front mudguard. Take off the cover for the master cylinder reservoir. Remove the float and extract the brake fluid with a syringe while placing it in a container. Unplug the wiring of the master cylinder reservoir level sensor. For bidirectional manual transmission versions like those of CG and CH where a common clutch master cylinder is fitted, disconnect the reservoir hose from that on the brake master cylinder, blocking it against the entry of dirt and securing it to the firewall with the end elevated. Using a pipe spanner, remove the hydraulic pipes from the master cylinder body. Plug the ends of the pipes and the master cylinder openings to prevent dirt from entering, and to retain as much fluid as possible. Take off the master cylinder retaining nuts and remove the master cylinder from the vehicle. If any brake fluid spills onto the paintwork, wash it off immediately with water as it is corrosive to paintwork. Do not depress the brake pedal or disturb the pushrod after removal or it will damage the brake booster. To install the parts, reverse the removal steps. If the master cylinder has been dismantled, fill the reservoir with clean brake fluid and pump the cylinder pistons until fluid emerges from the brake pipe apertures. Mount the master cylinder to the brake booster and tighten the retaining nuts and pipes to the specified torque settings. Finally, connect the wiring. Bleed the hydraulic brake system and, if necessary, the clutch system for the CG and CH manual transmission models. Ultimately, perform a road test to confirm brake functionality. It is more cost-effective to install a new or an exchange cylinder than to overhaul an original master cylinder assembly that is worn or leaking.