How to properly remove and install a clock spring on Mitsubishi Lancer?

The clock spring is a ribbon wire that twists with the steering wheel to deliver power to activate the driver airbag, and it can be easily broken by winding it beyond the operating limits. Before removing the clock spring, check that the front wheels are in the straight ahead position. If unsure of their position centralise the steering gear before proceeding. To remove the steering wheel, first switch off the ignition and make sure the wheels are straight. After that, unscrew the lower steering column cover retaining screws and withdraw the covers. Unclip the clock spring wiring by removing the lower dash panel from underneath the steering column. To disconnect the wiring connector, in CE models, carefully prise the green safety tab up with a flat bladed screwdriver, press the retaining tab and pull apart; in CG and CH models, the wiring connectors for the clock spring disconnect. Use quick-drying paint to indicate the position between the clock spring and the combination switch assembly. Remove the retaining screws and withdraw the clock spring from the steering shaft. When installing, make sure the front wheels are straight. Place the clock spring on the combination switch assembly as marked, and tighten the screws adequately. If you are not sure of the clock spring position centralise the clock spring by holding the inner hub and rotating it clockwise until it becomes hard to turn, then rotate it anticlockwise about 3 and 4/5 turns for CE and about 3 and ¾ turns for CG and CH so that the Arrows line up. To finish, connect the electrical connector of the clock spring securely, set the upper and lower covers back to the steering column, tighten the retaining screws, and put the steering wheel back in place.

Genuine Mitsubishi Clock Spring

Spiral Cable Clock Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Clock Springs found

View related parts
Mitsubishi Clockspring Part Number: 8619A168
$266.96 MSRP: $377.06
You Save: $110.10 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Air Bag Sensor; Clock Spring
Fits the following Mitsubishi Models:
- Mirage | 2014 | DE, ES | 3 Cyl 1.2 L GAS
- Outlander | 2014-2016 | ES, GT, SE, SEL | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander Sport | 2011-2017 | ES, GT, LE, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View More
View related parts
Mitsubishi Clockspring Part Number: 8619A339
$397.71 MSRP: $561.74
You Save: $164.03 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Air Bag Sensor; Clock Spring
- Replaces: 8619A737
Fits the following Mitsubishi Models:
- Mirage | 2021-2024 | BE, Black Edition, Carbonite Edition, ES, LE, SE | 3 Cyl 1.2 L GAS
- Mirage G4 | 2021-2024 | BE, Carbonite Edition, ES, LE, SE | 3 Cyl 1.2 L GAS
View related parts
Mitsubishi Clockspring Part Number: 8619A732
$269.18 MSRP: $371.17
You Save: $101.99 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Air Bag Sensor; Clock Spring
Fits the following Mitsubishi Models:
- Outlander | 2022-2025 | Black Edition, ES, SE, SE Launch Edition, SEL, SEL Launch Edition | 4 Cyl 2.5 L GAS
- Outlander PHEV | 2023-2025 | ES, Platinum Edition, Ralliart, SE, SE Tech, SEL, SEL Premium, SEL Touring | 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Mitsubishi Clockspring Part Number: 8619A618
$269.18 MSRP: $371.17
You Save: $101.99 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Air Bag Sensor; Clock Spring
Fits the following Mitsubishi Models:
- Outlander | 2022-2025 | Black Edition, ES, SE, SE Launch Edition, SEL, SEL Launch Edition | 4 Cyl 2.5 L GAS
- Outlander PHEV | 2023-2025 | ES, Platinum Edition, Ralliart, SE, SE Tech, SEL, SEL Premium, SEL Touring | 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Mitsubishi Clockspring Part Number: 8619A018
$164.33 MSRP: $222.66
You Save: $58.33 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Air Bag Sensor; Clock Spring
Fits the following Mitsubishi Models:
- Eclipse | 2006-2012 | GS, GS Sport, GT, SE, Spyder GS, Spyder GS Sport, Spyder GT, Spyder SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
- Endeavor | 2010-2011, 2004-2008 | LS, Limited, SE, XLS | 6 Cyl 3.8 L GAS
- Galant | 2004-2012 | DE, ES, FE, GTS, LS, Ralliart, SE, Sport Edition, Sport V6 | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
- Lancer | 2006-2017 | DE, ES, ES Sportback, Evolution GSR, Evolution MR, Evolution MR Touring, Evolution SE, GT, GT Sportback, GTS, GTS Sportback, OZ Rally, Ralliart, Ralliart Sportback, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Outlander | 2005-2013 | ES, GT, LS, Limited, SE, XLS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View More
View related parts
Mitsubishi Clockspring Part Number: MR301706
$194.91 MSRP: $264.09
You Save: $69.18 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Air Bag Sensor; Clock Spring
Fits the following Mitsubishi Models:
- Lancer | 2002 | ES, LS, OZ Rally | 4 Cyl 2.0 L GAS
- Montero | 2001-2002 | Limited, XLS | 6 Cyl 3.5 L GAS
View related parts
Mitsubishi Clockspring Part Number: 8619A515
$197.59 MSRP: $267.74
You Save: $70.15 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Air Bag Sensor; Clock Spring
- Replaces: 8619A445
Fits the following Mitsubishi Models:
- Eclipse Cross | 2022-2025, 2018-2020 | ES, LE, SE, SE Special Edition, SEL, SEL Special Edition, SEL Touring, SP | 4 Cyl 1.5 L GAS
- Outlander | 2017-2020 | ES, GT, LE, SE, SEL, SP | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander PHEV | 2018-2022 | GT, LE, SEL | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
- Outlander Sport | 2017-2025 | BE, ES, GT, GT Special Edition, LE, Ralliart, S, SE, SE Special Edition, SEL, SP, Trail Edition | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View More
View related parts
Mitsubishi Clockspring Part Number: MR583930
$210.55 MSRP: $285.31
You Save: $74.76 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Air Bag Sensor; Clock Spring
Fits the following Mitsubishi Models:
- Lancer | 2002-2006 | ES, Evolution, Evolution MR, Evolution RS, Evolution SE, LS, OZ Rally, Ralliart, Sportback, Sportback Ralliart | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Clockspring Part Number: MR301705
$213.31 MSRP: $289.03
You Save: $75.72 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Air Bag Sensor; Clock Spring
Fits the following Mitsubishi Models:
- Lancer | 2002 | ES, LS, OZ Rally | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Clockspring Part Number: 8619A015
$221.33 MSRP: $299.90
You Save: $78.57 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Air Bag Sensor; Clock Spring
Fits the following Mitsubishi Models:
- Endeavor | 2004 | LS, Limited, XLS | 6 Cyl 3.8 L GAS
- Lancer | 2002-2007 | ES, Evolution, Evolution MR, Evolution RS, LS, OZ Rally, Ralliart, SE, Sportback, Sportback Ralliart | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Montero | 2003-2006 | Limited, XLS | 6 Cyl 3.8 L GAS
- Outlander | 2003 | LS, XLS | 4 Cyl 2.4 L GAS
View More
View related parts
Mitsubishi Clockspring Part Number: 8619A017
$230.18 MSRP: $311.91
You Save: $81.73 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Air Bag Sensor; Clock Spring
Fits the following Mitsubishi Models:
- Outlander | 2004 | LS, XLS | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Clockspring Part Number: 8619A517
$238.26 MSRP: $322.85
You Save: $84.59 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Air Bag Sensor; Clock Spring
- Replaces: 8619A472
Fits the following Mitsubishi Models:
- Eclipse Cross | 2022-2025, 2018-2020 | ES, LE, SE, SE Special Edition, SEL, SEL Special Edition, SEL Touring | 4 Cyl 1.5 L GAS
- Outlander | 2017-2020 | ES, GT, LE, SE, SEL, SP | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander PHEV | 2018-2022 | GT, LE, SEL | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View More
View related parts
Mitsubishi Clockspring Part Number: 8619A362
$246.86 MSRP: $326.65
You Save: $79.79 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Air Bag Sensor; Clock Spring
Fits the following Mitsubishi Models:
- Mirage | 2017-2020, 2014-2015 | DE, ES, GT, LE, RF, SE | 3 Cyl 1.2 L GAS
- Mirage G4 | 2017-2020 | ES, LE, RF, SE | 3 Cyl 1.2 L GAS
- Outlander Sport | 2014-2015 | ES, GT, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View More
View related parts
Mitsubishi Clockspring Part Number: MR372516
$179.92 MSRP: $243.80
You Save: $63.88 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Air Bag Sensor; Clock Spring
Fits the following Mitsubishi Models:
- Diamante | 1999-2004 | Base, ES, LS, VR-X | 6 Cyl 3.5 L GAS

Mitsubishi Clock Spring

The Mitsubishi steering Clock Spring helps to connect the car steering wheel controls and air bag assembly with power and signal even if the steering wheel spins. This will help to protect safety systems. The brand began with its Model A a century ago, gradually progressing to develop vehicles today equipped with MIVEC engines, Super All Wheel Control, and plug-in hybrid technology. The first is a technology that delivers a punchy response while boosting fuel economy. The second is especially helpful when driving over broken pavements. The last one allows drivers to glide quietly through the neighborhood without disturbing neighbors with gas. The vehicle will then switch to gasoline to tackle long hauls. More relevant than ever, this technology showcases the integration of Mitsubishi with the automobile of the future. Both the intuitive cruise control inside the cabin and smartphone link make daily commutes much easier. Meanwhile, testing of the fuel cell and advanced sensor suites is underway for a cleaner and smarter future. The strengths of Mitsubishi show how they combine practical with future thinking for drivers all over the world. Similar to how every driveline and engine is engineered to perform reliably, the Clock Spring is engineered into your steering wheel. The Clock Spring is engineered as a flat ribbon circularly wound in a housing, causing it to flex and not stretch, ensuring wiring does not snap during full lock maneuvers. This device provides voltage to the horn, radio buttons, and more importantly, the air bag module, which maintains a fault-free path for crash sensor data and power. Every Mitsubishi boasts effective steering wheel electronics with a consistent airbag readiness, thanks to this small component.

Pick genuine OEM Clock Spring if you want superb performance and durability that lasts. Mitsubishi builds that using high-grade materials and official factory techniques to meet very strict standards. This means you get parts you can actually trust for your daily drive. Finding the right parts is simple in the massive stock of genuine inventory. You can stop guessing if a part will fit or hold up. You will love the low prices, dependable service and the real manufacturer's warranty on Mitsubishi Clock Spring. Order today and the store will ship your brand-new items to your door as fast as possible.

Mitsubishi Clock Spring Parts Questions & Experts Answers

Clockspring
8619A015
Q: How to properly remove and install a clock spring on Mitsubishi Lancer?
A:
The clock spring is a ribbon wire that twists with the steering wheel to deliver power to activate the driver airbag, and it can be easily broken by winding it beyond the operating limits. Before removing the clock spring, check that the front wheels are in the straight ahead position. If unsure of their position centralise the steering gear before proceeding. To remove the steering wheel, first switch off the ignition and make sure the wheels are straight. After that, unscrew the lower steering column cover retaining screws and withdraw the covers. Unclip the clock spring wiring by removing the lower dash panel from underneath the steering column. To disconnect the wiring connector, in CE models, carefully prise the green safety tab up with a flat bladed screwdriver, press the retaining tab and pull apart; in CG and CH models, the wiring connectors for the clock spring disconnect. Use quick-drying paint to indicate the position between the clock spring and the combination switch assembly. Remove the retaining screws and withdraw the clock spring from the steering shaft. When installing, make sure the front wheels are straight. Place the clock spring on the combination switch assembly as marked, and tighten the screws adequately. If you are not sure of the clock spring position centralise the clock spring by holding the inner hub and rotating it clockwise until it becomes hard to turn, then rotate it anticlockwise about 3 and 4/5 turns for CE and about 3 and ¾ turns for CG and CH so that the Arrows line up. To finish, connect the electrical connector of the clock spring securely, set the upper and lower covers back to the steering column, tighten the retaining screws, and put the steering wheel back in place.