Where is the Flasher Relay for the turn signals and hazard lights located, and How to replace it on Mitsubishi Diamante?

It is located in the interior fuse panel under the knee protector of driver at the left side. To get it out, just draw it out. Installation: Before installing the prongs, make sure that they are facing the right direction; twist the flasser until the prongs are set, and then press the prongs in until they are completely installed.

What are the differences in Flasher Relay operation for turn signal and hazard systems on Mitsubishi Galant?

In older models (1998 and earlier), a single unit, the turn signal and hazard flasher, is fitted on the fuse panel/junction block beneath the left end of the instrument panel; on newer models (1999 and later), the ETACS-ECU and a small electronic module are built into the switch. Once the flasher unit is operating correctly one can hear an audible click during the operation, but when the turn signals fail on one side and the flasher unit does not click, or when a bulb on one side is flashing at an unusually fast rate, but the one on the opposite side is not turning on, a faulty turn signal bulb may be shown. When both turn signals do not blink, then the problem could be a blown fuse, faulty flasher unit, faulty switch or loose or open connection and a quick inspection of the fuse box should be made to determine whether turn signal fuse is blown and then inspect the wiring of the turn signal to determine whether this is short or not. In the models before 1998 the flasher is on the interior fuse block and may be changed by unplugging it and replacing it with another of the same type, making sure the new one is the same. However, with 1999 and subsequent models, one must be diagnosed and replaced by a dealer service department or a qualified technician with the required tools.

Genuine Mitsubishi Flasher Relay

Indicator Flasher Relay

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Flasher Relays found

View related parts
Mitsubishi Horn Relay Part Number: 8627A030
$43.69 MSRP: $60.68
You Save: $16.99 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Relay; Flasher Relay; Relay Block; Window Relay; Fan Relay; Control Relay; Power Relay
Fits the following Mitsubishi Models:
- 3000GT | 1991-1999 | Base, SL, Spyder SL, Spyder VR-4, VR-4 | 6 Cyl 3.0 L GAS
- Diamante | 1997-2004 | Base, ES, LS, VR-X | 6 Cyl 3.5 L GAS
- Eclipse | 1995-2012 | Base, GS, GS Sport, GST, GSX, GT, GTS, RS, SE, Spyder GS, Spyder GS Sport, Spyder GST, Spyder GT, Spyder GTS, Spyder SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
- Eclipse Cross | 2022-2025, 2018-2020 | Black Edition, ES, LE, Ralliart, SE, SE Special Edition, SEL, SEL Special Edition, SEL Touring, SP | 4 Cyl 1.5 L GAS
- Endeavor | 2004-2008 | LS, Limited, SE, XLS | 6 Cyl 3.8 L GAS
- Expo | 1992-1994 | Base, SP | 4 Cyl 2.4 L GAS
- Expo LRV | 1992-1994 | Base, Sport | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
- Galant | 1994-2012 | DE, ES, FE, GS, GTS, GTZ, LS, Ralliart, S, SE, Sport Edition, Sport V6 | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
- Lancer | 2002-2017 | DE, ES, ES Sportback, Evolution, Evolution GSR, Evolution MR, Evolution MR Touring, Evolution RS, Evolution SE, GT, GT Sportback, GTS, GTS Sportback, LS, OZ Rally, Ralliart, Ralliart Sportback, SE, SEL, Sportback, Sportback Ralliart | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Mirage | 2017-2024, 1993-2002 | BE, Black Edition, Carbonite Edition, DE, ES, GT, LE, LS, RF, S, SE | 3 Cyl 1.2 L GAS, 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L GAS
View More
View related parts
Mitsubishi Horn Relay Orange Part Number: 8627A049
$12.61 MSRP: $16.41
You Save: $3.80 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Relay, Micro-ISO, Orange; Flasher Relay; Relay Block; Relay
- Replaces: 8627A046
Fits the following Mitsubishi Models:
- Eclipse Cross | 2022-2024 | ES, LE, SE, SE Special Edition, SEL, SEL Special Edition, SEL Touring | 4 Cyl 1.5 L GAS
- Outlander Sport | 2011-2018 | ES, GT, LE, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Horn Relay Part Number: 8627A008
$15.32 MSRP: $19.95
You Save: $4.63 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Relay; Flasher Relay; ECM Relay; Compressor Relay
Fits the following Mitsubishi Models:
- Eclipse | 2001-2012 | GS, GS Sport, GT, GTS, RS, SE, Spyder GS, Spyder GS Sport, Spyder GT, Spyder GTS, Spyder SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
- Endeavor | 2004-2008 | LS, Limited, SE, XLS | 6 Cyl 3.8 L GAS
- Galant | 2002-2012 | DE, ES, FE, GTS, GTZ, LS, Ralliart, SE, Sport Edition, Sport V6 | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
- Lancer | 2002-2007 | ES, Evolution, Evolution MR, Evolution RS, Evolution SE, LS, OZ Rally, Ralliart, SE, Sportback, Sportback Ralliart | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Outlander | 2003-2006 | LS, Limited, SE, XLS | 4 Cyl 2.4 L GAS
View More
View related parts
Mitsubishi Fusible Link Part Number: 8627A050
$32.63 MSRP: $42.81
You Save: $10.18 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Relay, Mini-ISO; Flasher Relay; Relay Block; Relay
Fits the following Mitsubishi Models:
- Eclipse Cross | 2022-2025, 2018-2020 | Black Edition, ES, LE, Ralliart, SE, SE Special Edition, SEL, SEL Special Edition, SEL Touring, SP | 4 Cyl 1.5 L GAS
- Outlander Sport | 2019-2025 | BE, ES, GT, GT Special Edition, LE, Ralliart, S, SE, SE Special Edition, SEL, SP, Trail Edition | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Relay Part Number: 8627A081
$18.87 MSRP: $24.56
You Save: $5.69 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Relay, Headlamp Washer; Flasher Relay
Fits the following Mitsubishi Models:
- Outlander | 2022-2024 | Black Edition, ES, SE, SE Launch Edition, SEL, SEL Launch Edition | 4 Cyl 2.5 L GAS
- Outlander PHEV | 2023-2024 | ES, Platinum Edition, Ralliart, SE, SE Tech, SEL, SEL Premium, SEL Touring | 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Mitsubishi Horn Relay Part Number: 8627A121
$20.76 MSRP: $27.03
You Save: $6.27 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Relay; Flasher Relay
Fits the following Mitsubishi Models:
- Outlander | 2022-2024 | Black Edition, ES, SE, SE Launch Edition, SEL, SEL Launch Edition | 4 Cyl 2.5 L GAS
- Outlander PHEV | 2023-2024 | ES, Platinum Edition, Ralliart, SE, SE Tech, SEL, SEL Premium, SEL Touring | 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)

Mitsubishi Flasher Relay

Mitsubishi Flasher Relay maintains turn signals flashing at a consistent pace and makes sure that they are well understood by other road users, hence enhancing safety in everyday driving. Mitsubishi started in shipping and entered into automobiles where it specializes in versatile powertrains, including fuel sipping petrol units and various hybrids, with a constant focus on balance between performance and efficiency. The brand is marketing Super All Wheel Control as a surefooted way of being on gravel or wet pavement, complements the drives with cruise control and smartphone connectivity as an easy-to-use way of being connected. It is also testing future technologies such as compact cell systems and pilot fleets of electric commuters as a promise of smart mobility that is easy to approach not only by families but also by new drivers. In this product line, reliability is a fundamental pledge and components are constructed to be easily maintained so that owners can enjoy the road more, and Mitsubishi vehicles enjoy cabins with controls that make journeys instinctive. A Flasher Relay is a small electronic switch that opens and closes a circuit at a rate that is very fast, so the indicator lamps appear to flash at the exact rate defined by factory standards and turn intentions are easily seen, even in broad daylight. The unit is inserted into a socket or connected by simple wire leads, and its internal timer circuit is resistant to wear caused by repeated cycling, thus limiting the likelihood of unpredictable blink rates. Since the Flasher Relay is not involved in carrying the load of the indicator, it does not cause any stress to other electrical parts, and when changed at the correct time, promotes lighting health throughout the entire vehicle line.

Pick genuine OEM Flasher Relay if you want superb performance and durability that lasts. Mitsubishi builds that using high-grade materials and official factory techniques to meet very strict standards. This means you get parts you can actually trust for your daily drive. Finding the right parts is simple in the massive stock of genuine inventory. You can stop guessing if a part will fit or hold up. You will love the low prices, dependable service and the real manufacturer's warranty on Mitsubishi Flasher Relay. Order today and the store will ship your brand-new items to your door as fast as possible.

Mitsubishi Flasher Relay Parts Questions & Experts Answers

Horn Relay
8627A030
Q: Where is the Flasher Relay for the turn signals and hazard lights located, and How to replace it on Mitsubishi Diamante?
A:
It is located in the interior fuse panel under the knee protector of driver at the left side. To get it out, just draw it out. Installation: Before installing the prongs, make sure that they are facing the right direction; twist the flasser until the prongs are set, and then press the prongs in until they are completely installed.
Horn Relay
8627A008
Q: What are the differences in Flasher Relay operation for turn signal and hazard systems on Mitsubishi Galant?
A:
In older models (1998 and earlier), a single unit, the turn signal and hazard flasher, is fitted on the fuse panel/junction block beneath the left end of the instrument panel; on newer models (1999 and later), the ETACS-ECU and a small electronic module are built into the switch. Once the flasher unit is operating correctly one can hear an audible click during the operation, but when the turn signals fail on one side and the flasher unit does not click, or when a bulb on one side is flashing at an unusually fast rate, but the one on the opposite side is not turning on, a faulty turn signal bulb may be shown. When both turn signals do not blink, then the problem could be a blown fuse, faulty flasher unit, faulty switch or loose or open connection and a quick inspection of the fuse box should be made to determine whether turn signal fuse is blown and then inspect the wiring of the turn signal to determine whether this is short or not. In the models before 1998 the flasher is on the interior fuse block and may be changed by unplugging it and replacing it with another of the same type, making sure the new one is the same. However, with 1999 and subsequent models, one must be diagnosed and replaced by a dealer service department or a qualified technician with the required tools.