How to access and test A/C Switch, Brake Light Switch, Hazard Warning Switch and Relay on Mitsubishi Lancer?

Most switches have three or more wires; one from power, one taking power to the component or relay, possibly another one for illumination which may necessitate a fourth wire to earth the bulb. To get to the switch, you must take off the component it is fixed on. Observe the wire colors joining the power source to the switch and that of the switch to the component. Utilize an ohmmeter to measure resistance across the terminals after disconnecting the wire, the switch should show no resistance in On position and open circuit in Off position. A relay is basically an electrical switch that is operated by the aid of a remote signal. That is, a relay can carry a bigger current than a small switch. Thus the relay has the advantage of not needing heavy-duty switches and thick wires. The contacts in the relay are closed by a solenoid when the component switch is ON to allow power flow. In the engine compartment fuse and relay box as well as under the dashboard, there are various relays. Due to different equipment levels, not all vehicles are fitted with all the relays. To test to check a relay, first remove it from its housing. Then use an ohmmeter to check the continuity between the terminals. Next apply battery power to the relay and check its functionality. A combination switch is a single unit that contains a headlamp and turn signal lamp switch on one side and a wiper and washer switch on the other side. These switches have individual component parts that can be re-newed. To remove and install the steering column, adjust the steering column out of the way. Remove the steering column retaining screws. Disconnect the steering column wiring. Perform the above steering column removal and installation procedures for the CE, CG and CH. The removal and installation procedures for the Hazard Warning Switch and ventilation control switches also include details on the wiring. The lower dash panel contains the rheostat, which requires removal of the panel for access. The reverse lamp switch is incorporated into the inhibitor switch on automatic models, while on manual models, the functionality of the switch should be checked and renewed if necessary. The Brake Light Switch requires tests, adjustments and renewals and handbrake warning lamp switch needs tests and retire if needed. The removal and installation of courtesy lamp switches in the doors and tailgates need to be done carefully so the wiring can connect securely.

Genuine Mitsubishi Hazard Warning Switch

Hazard Warning Emergency Light Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Hazard Warning Switches found

View related parts
Mitsubishi Hazard Switch Part Number: 25290W060P
$44.65 MSRP: $62.02
You Save: $17.37 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard Warning L; Hazard Warning Switch
Fits the following Mitsubishi Models:
- Outlander | 2005-2006 | LS, Limited, SE, XLS | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Hazard Switch Part Number: 25290W090P
$45.68 MSRP: $63.45
You Save: $17.77 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard Warning L; Hazard Warning Switch
Fits the following Mitsubishi Models:
- Galant | 2004-2012 | DE, ES, FE, GTS, LS, Ralliart, SE, Sport Edition, Sport V6 | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Hazard Switch Part Number: MN185089
$50.60 MSRP: $70.28
You Save: $19.68 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard Warning L; Hazard Warning Switch
Fits the following Mitsubishi Models:
- Lancer | 2006-2007 | ES, OZ Rally, Ralliart, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Hazard Switch Part Number: 25290W040P
$50.84 MSRP: $70.62
You Save: $19.78 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard Warning L; Hazard Warning Switch
Fits the following Mitsubishi Models:
- Outlander | 2003-2004 | LS, XLS | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Hazard Switch Part Number: MR406456
$53.62 MSRP: $74.47
You Save: $20.85 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard Warning L; Hazard Warning Switch; Heater Control Support
Fits the following Mitsubishi Models:
- Lancer | 2008, 2002-2006 | DE, ES, Evolution, Evolution MR, Evolution RS, Evolution SE, GTS, LS, OZ Rally, Ralliart, Sportback, Sportback Ralliart | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Hazard Switch Part Number: 8614A132
$57.72 MSRP: $80.17
You Save: $22.45 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard Warning L; Hazard Warning Switch
Fits the following Mitsubishi Models:
- Mirage | 2017-2024, 2014-2015 | BE, Black Edition, Carbonite Edition, DE, ES, GT, LE, RF, SE | 3 Cyl 1.2 L GAS
- Mirage G4 | 2017-2024 | BE, Carbonite Edition, ES, LE, RF, SE | 3 Cyl 1.2 L GAS
View related parts
Mitsubishi Hazard Switch Part Number: 8614A280
$71.08 MSRP: $94.82
You Save: $23.74 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard Warning L; Hazard Warning Switch
Fits the following Mitsubishi Models:
- Outlander | 2022-2025 | Black Edition, ES, SE, SE Launch Edition, SEL, SEL Launch Edition | 4 Cyl 2.5 L GAS
- Outlander PHEV | 2023-2025 | ES, Platinum Edition, Ralliart, SE, SE Tech, SEL, SEL Premium, SEL Touring | 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Mitsubishi Hazard Switch Part Number: MR951544HB
$18.04 MSRP: $23.48
You Save: $5.44 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard Warning L; Hazard Warning Switch
Fits the following Mitsubishi Models:
- Endeavor | 2010-2011, 2006-2008 | LS, Limited, SE | 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Hazard Switch Part Number: MR117573
$35.29 MSRP: $46.31
You Save: $11.02 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard Warning L; Hazard Warning Switch
Fits the following Mitsubishi Models:
- Montero Sport | 1997-2004 | ES, LS, Limited, XLS, XS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
Mitsubishi Hazard Switch Part Number: 8002C684
$142.35 MSRP: $182.51
You Save: $40.16 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard Warning L; Hazard Warning Switch
Fits the following Mitsubishi Models:
- Eclipse Cross | 2018-2020 | ES, LE, SE, SEL | 4 Cyl 1.5 L GAS
- Outlander Sport | 2018-2021 | BE, ES, GT, LE, S, SE, SEL, SP | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Hazard Switch Part Number: 8002D030
$165.25 MSRP: $212.51
You Save: $47.26 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Hazard Warning L; Hazard Warning Switch
Fits the following Mitsubishi Models:
- Eclipse Cross | 2022-2024 | ES, LE, SE, SE Special Edition, SEL, SEL Special Edition, SEL Touring | 4 Cyl 1.5 L GAS
- Outlander Sport | 2021-2025 | BE, ES, GT, GT Special Edition, LE, Ralliart, S, SE, SE Special Edition, SEL, Trail Edition | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Mitsubishi Hazard Warning Switch

The Mitsubishi Hazard Warning Switch allows a driver to instantly flash all the indicator lamps when they face a sudden danger. Starting as a shipping company dating back to 1870, Mitsubishi has matured into a world carmaker that makes it easier to focus on the journey. The brand's punchy MIVEC engines deliver a smart balance between power and efficiency. Moreover, Super All Wheel Control ensures a firm grip on loose gravel. The brand has cabins filled with cruise control and smartphone links, keeping young drivers calm and connected. Through current trials of fuel cell drivetrains and supple advanced safety sensors, Mitsubishi does seem to be pursuing cleaner power and sharper awareness. Their cars, which range from sedans to crossovers and rugged SUVs, do seem to have an air of dependability and inventiveness. The Hazard Warning Switch plays a small but vital role in combining these traits that make up a good ride. Located for fast fingertip access, the switch closes a heavy-duty circuit that sends current to all outside flashers, making the truck more visible in heavy rain, night breakdowns, and stop-and-go jams. The internal contacts are durable, so repetitive pressing does not lessen their brightness. This Hazard Warning Switch is a universal component, as its size and connectors adhere to factory standards. Thus, replacing an old part with a new one is an easy task. Importantly, this facilitates the use of hazard lights, thereby indicating your emergency situation to passengers and roadside motorists.

Pick genuine OEM Hazard Warning Switch if you want superb performance and durability that lasts. Mitsubishi builds that using high-grade materials and official factory techniques to meet very strict standards. This means you get parts you can actually trust for your daily drive. Finding the right parts is simple in the massive stock of genuine inventory. You can stop guessing if a part will fit or hold up. You will love the low prices, dependable service and the real manufacturer's warranty on Mitsubishi Hazard Warning Switch. Order today and the store will ship your brand-new items to your door as fast as possible.

Mitsubishi Hazard Warning Switch Parts Questions & Experts Answers

Hazard Switch
MN185089
Q: How to access and test A/C Switch, Brake Light Switch, Hazard Warning Switch and Relay on Mitsubishi Lancer?
A:
Most switches have three or more wires; one from power, one taking power to the component or relay, possibly another one for illumination which may necessitate a fourth wire to earth the bulb. To get to the switch, you must take off the component it is fixed on. Observe the wire colors joining the power source to the switch and that of the switch to the component. Utilize an ohmmeter to measure resistance across the terminals after disconnecting the wire, the switch should show no resistance in On position and open circuit in Off position. A relay is basically an electrical switch that is operated by the aid of a remote signal. That is, a relay can carry a bigger current than a small switch. Thus the relay has the advantage of not needing heavy-duty switches and thick wires. The contacts in the relay are closed by a solenoid when the component switch is ON to allow power flow. In the engine compartment fuse and relay box as well as under the dashboard, there are various relays. Due to different equipment levels, not all vehicles are fitted with all the relays. To test to check a relay, first remove it from its housing. Then use an ohmmeter to check the continuity between the terminals. Next apply battery power to the relay and check its functionality. A combination switch is a single unit that contains a headlamp and turn signal lamp switch on one side and a wiper and washer switch on the other side. These switches have individual component parts that can be re-newed. To remove and install the steering column, adjust the steering column out of the way. Remove the steering column retaining screws. Disconnect the steering column wiring. Perform the above steering column removal and installation procedures for the CE, CG and CH. The removal and installation procedures for the Hazard Warning Switch and ventilation control switches also include details on the wiring. The lower dash panel contains the rheostat, which requires removal of the panel for access. The reverse lamp switch is incorporated into the inhibitor switch on automatic models, while on manual models, the functionality of the switch should be checked and renewed if necessary. The Brake Light Switch requires tests, adjustments and renewals and handbrake warning lamp switch needs tests and retire if needed. The removal and installation of courtesy lamp switches in the doors and tailgates need to be done carefully so the wiring can connect securely.