How to properly remove and install the Neutral Safety Switch (Park/Neutral Position switch) on Mitsubishi Galant?

The switch on top of the transaxle is the Neutral Safety Switch that tells the Powertrain Control Module (PCM) the gear of the automatic transaxle. Always keep the ignition key in the OFF position while removing the electrical connector of the Neutral Safety Switch. After that, remove the nut to disconnect the shift cable from the Neutral Safety Switchmanual control lever. Next, remove the bolt on the manual lever shaft nut, remove the lever, and unscrew the mounting bolts of the Neutral Safety Switch to take out the Neutral Safety Switch. The installation is executed in reverse, followed by a significant adjustment step. Place the shifter in the Neutral position inside the vehicle and loosen the shift cable-to-manual control lever adjusting nut. Positioned manually control lever to Neautral position make hole of end of lever and neutral align hole of Neutral Safety Switch body flange. Loosen the mounting bolts of the Neutral Safety Switch if misalignment occurs. Turn the Neutral Safety Switch body body until the holes are aligned. Use a drill bit for checking alignment. Tighten the Neutral Safety Switch body mounting bolts. Both bolts and nuts of the Neutral Safety Switch body and the transaxle control cable-to-manual lever. To finalize the procedure, apply tension to the shift cable and tighten the adjusting nut securely.

Genuine Mitsubishi Galant Neutral Safety Switch

Transmission Range Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Neutral Safety Switchs found

View related parts
Mitsubishi Galant Neutral Safety Switch Part Number: MR983147
$86.57 MSRP: $120.23
You Save: $33.66 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Automatic Transmission Case Inhibit
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2004-2012 Mitsubishi Galant | DE, ES, FE, SE, Sport Edition | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Galant Neutral Safety Switch Part Number: 8604A011
$90.59 MSRP: $125.82
You Save: $35.23 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Automatic Transmission Case Inhibit
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 1999-2006 Mitsubishi Galant | DE, ES, GTS, GTZ, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Galant Neutral Safety Switch Part Number: 8604A009
$94.76 MSRP: $131.62
You Save: $36.86 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Automatic Transmission Case Inhibit
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2007-2009 Mitsubishi Galant | GTS, Ralliart, Sport V6 | 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Galant Neutral Safety Switch Part Number: MD753631
$102.26 MSRP: $142.03
You Save: $39.77 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Automatic Transmission Case Inhibit
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 1993-1998 Mitsubishi Galant | DE, ES, GS, LS, S | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Galant Clutch Switch Part Number: MR329955
$17.16 MSRP: $22.35
You Save: $5.19 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Clutch; Neutral Safety Switch
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 1999 Mitsubishi Galant | DE, ES, GTZ, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mitsubishi Galant Back-Up Switch Part Number: MD730979
$28.10 MSRP: $36.58
You Save: $8.48 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Gearshift Backup; Neutral Safety Switch; Back Up Light Switch
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 1989-1999 Mitsubishi Galant | Base, DE, ES, GS, GSR, GSX, GTZ, LS, S, VR-4 | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS

Mitsubishi Galant Neutral Safety Switch

OEM Neutral Safety Switch can boast superior quality and long-term durability. Each part meets strict factory specs and passes careful checks in production. So you'll get Neutral Safety Switch with long-lasting strength and an exact fit. If you need OEM Mitsubishi Galant Neutral Safety Switch, the online store is the ideal place. The store carry a wide range of genuine Mitsubishi Galant parts at the highly competitive prices. You'll enjoy a simple and no-hassle shopping experience. You'll get unbeatable prices and fast delivery service. You'll get the manufacturer's warranty and a straightforward return policy. Shop with confidence and keep your car in top condition.

Mitsubishi Galant Neutral Safety Switch Parts Questions & Experts Answers

Neutral Safety Switch
8604A011
Q: How to properly remove and install the Neutral Safety Switch (Park/Neutral Position switch) on Mitsubishi Galant?
A:
The switch on top of the transaxle is the Neutral Safety Switch that tells the Powertrain Control Module (PCM) the gear of the automatic transaxle. Always keep the ignition key in the OFF position while removing the electrical connector of the Neutral Safety Switch. After that, remove the nut to disconnect the shift cable from the Neutral Safety Switchmanual control lever. Next, remove the bolt on the manual lever shaft nut, remove the lever, and unscrew the mounting bolts of the Neutral Safety Switch to take out the Neutral Safety Switch. The installation is executed in reverse, followed by a significant adjustment step. Place the shifter in the Neutral position inside the vehicle and loosen the shift cable-to-manual control lever adjusting nut. Positioned manually control lever to Neautral position make hole of end of lever and neutral align hole of Neutral Safety Switch body flange. Loosen the mounting bolts of the Neutral Safety Switch if misalignment occurs. Turn the Neutral Safety Switch body body until the holes are aligned. Use a drill bit for checking alignment. Tighten the Neutral Safety Switch body mounting bolts. Both bolts and nuts of the Neutral Safety Switch body and the transaxle control cable-to-manual lever. To finalize the procedure, apply tension to the shift cable and tighten the adjusting nut securely.