How to remove and install the front and rear bumpers on Mitsubishi Lancer?

In the case of CE models you need to raise the bonnet and remove both turn signal lamps and further remove the bumper clips retaining the bumper to the body. If fog lamps are fitted, disconnect the wiring from the backs of the lamps, then in the wheel arch, remove the retaining clip on the splashguard and the screw at the top corner of the bumper, repeating on the other side. With assistance, unclip the clips at the front of the bumper under the car, remove the retaining bolts from the chassis rails and pull the bumper forwards. If required, detach the retaining clips and remove the bumper from the bracket. To install the bumper, simply follow the removal procedure in reverse. This will ensure the bumper is installed correctly, with all clips and wiring connected. To access the clips retaining the bottom of the bumper to the radiator support bracket, the front of the vehicle needs to be raised and supported on jack stands for CG and CH models. If fog lamps are fitted, unplug the wiring from the rear. Within the wheel arch, detach the clips holding the inner guard liner as well as the screw on the bumper top. With some help, detach the clips securing the bumper to the radiator support bracket and pull the bumper forward. When fitting the lamp, ensure that the clips and screws are secured and the wiring is reconnected. To install rear bumper on CE models, work under the bumper to take out the many clips that hold it to the body, then in the wheelarch take out the screws that hold the mud-flaps and the clip on the splashguard, repeating on the other side. Take away the retaining bolt at the top corner of the bumper on each side, then inside the vehicle remove the trim necessary to access the bumper retaining nuts and bolts. On Hatchback variants, first disconnect the wiring of number plate lamp and feed it through the body towards the bumper. Now with assistance withdraw the bumper. To install, reverse the removal procedure and securely tighten all fasteners. Finally on Hatchback models, connect the wiring to the number plate lamps. For CG and CH models, the removal of screws retaining mud-flaps and their clip on splashguard as well as the screw retaining the top of the bumper to the rear guard is a similar procedure done to drop the rear bumper. Take out the rear tail lamps assembly and accessible screws prior to arriving at the bumper retaining screws inside the vehicle. If your car has after-market reverse parking sensors, trace their wiring to find where it was spliced with the wiring harness and disconnect it; or simply remove the sensors and then with an assistant, pull off the bumper. To install components, perform removal operations in reverse order. Ensure all fasteners are securely tightened. Reconnect harness wiring. Install tail lamp assemblies.

Genuine Mitsubishi Lancer Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

Part Type

Bumper Cover
Other Bumpers

Select Part Type

24 Bumpers found

View related parts
Mitsubishi Lancer Bumper Cover Part Number: MN161541
$243.54 MSRP: $797.58
You Save: $554.04 (70%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Face, Rear Bumper, Without Hole; Bumper
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2004-2007 Mitsubishi Lancer | ES, LS, OZ Rally, SE | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Lancer Impact Bar Part Number: 6400C901
$269.88 MSRP: $381.18
You Save: $111.30 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reinforcement, Front Bumper; Bumper; Reinforcement
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2008-2015 Mitsubishi Lancer | DE, ES, ES Sportback, Evolution GSR, Evolution MR, Evolution MR Touring, Evolution SE, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lancer Bumper Cover Part Number: MN186348
$302.62 MSRP: $427.43
You Save: $124.81 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Face, Rear Bumper; Bumper
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2004-2006 Mitsubishi Lancer | Ralliart | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lancer Bumper Cover Part Number: MR972505
$310.13 MSRP: $438.03
You Save: $127.90 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Face, Front Bumper, With Reflec; Bumper
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2002-2003 Mitsubishi Lancer | ES, LS | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Lancer Bumper Cover Part Number: MN161538
$357.62 MSRP: $505.12
You Save: $147.50 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Face, Front Bumper, Without Hole; Bumper
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2004-2005 Mitsubishi Lancer | ES, LS, OZ Rally, Sportback | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lancer Bumper Cover Part Number: 6400A911
$550.35 MSRP: $777.33
You Save: $226.98 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Face, Front Bumper; Bumper
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mitsubishi Lancer | ES, OZ Rally, SE | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Lancer Bumper Cover Part Number: 6410B575
$561.73 MSRP: $793.40
You Save: $231.67 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Face, Rear Bumper, Without Hole; Bumper
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2010-2015 Mitsubishi Lancer | ES Sportback, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lancer Bumper Cover Part Number: 6410B578
$575.34 MSRP: $812.63
You Save: $237.29 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Face, Rear Bumper, With Holes; Bumper
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mitsubishi Lancer | Ralliart Sportback | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Lancer Bumper Cover Part Number: 6410B563
$583.44 MSRP: $824.07
You Save: $240.63 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Face, Rear Bumper, With Turbo; Bumper
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2009-2015 Mitsubishi Lancer | Ralliart, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lancer Bumper Cover Part Number: 6410B308
$588.48 MSRP: $831.18
You Save: $242.70 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Face, Rear Bumper; Bumper
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2010-2015, 2008 Mitsubishi Lancer | Evolution GSR, Evolution MR, Evolution MR Touring, Evolution SE | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Lancer Absorber Part Number: MN126463
$101.76 MSRP: $141.33
You Save: $39.57 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Core, Front Bumper; Bumper
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2004-2005 Mitsubishi Lancer | ES, LS, OZ Rally, Ralliart, Sportback, Sportback Ralliart | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lancer Impact Bar Part Number: 6410A883
$133.69 MSRP: $181.15
You Save: $47.46 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reinforcement, Rear Bumper; Bumper
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2008-2017 Mitsubishi Lancer | DE, ES, ES Sportback, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lancer Absorber Part Number: MN126689
$178.05 MSRP: $241.27
You Save: $63.22 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Core, Rear Bumper; Bumper
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2004 Mitsubishi Lancer | Sportback, Sportback Ralliart | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lancer Impact Bar Part Number: 6400B382
$181.73 MSRP: $246.25
You Save: $64.52 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reinforcement, Front Bumper; Bumper
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2008-2015 Mitsubishi Lancer | DE, ES, ES Sportback, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lancer Bumper Cover Part Number: 6400D172
$192.10 MSRP: $260.30
You Save: $68.20 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Face, Front Bumper, Without Hole; Bumper
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2008-2015 Mitsubishi Lancer | DE, ES, ES Sportback, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lancer Absorber Part Number: MN126677
$196.76 MSRP: $266.62
You Save: $69.86 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Core, Rear Bumper; Bumper
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2004-2007 Mitsubishi Lancer | ES, LS, OZ Rally, Ralliart, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lancer Bumper Cover Part Number: 6400B914
$206.63 MSRP: $279.98
You Save: $73.35 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Face, Front Bumper; Bumper
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2008-2012 Mitsubishi Lancer | DE, ES, ES Sportback, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lancer Bumper Cover Part Number: 6410B832
$211.26 MSRP: $286.26
You Save: $75.00 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Face, Rear Bumper, Without Hole; Bumper
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2008-2017 Mitsubishi Lancer | DE, ES, GT, GTS, Ralliart, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lancer Impact Bar Part Number: 6400C330
$234.78 MSRP: $318.14
You Save: $83.36 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reinforcement, Front Bumper; Bumper
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2013-2015 Mitsubishi Lancer | DE, ES, ES Sportback, GT, GT Sportback, Ralliart, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lancer Impact Bar Part Number: 6400C970
$243.95 MSRP: $330.56
You Save: $86.61 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reinforcement, Front Bumper; Bumper
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2013-2017 Mitsubishi Lancer | DE, ES, ES Sportback, GT, GT Sportback, Ralliart, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

| Page 1 of 2 |Next >

1-20 of 24 Results

Mitsubishi Lancer Bumper

Mitsubishi Lancer Bumper is the first line of protection for the vehicle. Its function is to absorb and redistribute the energy caused by a collision at low speed. This helps to lessen the damage done to the other components as well as to keep the passengers more or less safe. Located at the front and rear edges, the Bumper absorbs the first impact of a small collision to keep the body panels and mechanical systems intact. The structure is built from equipment-matched materials that help to keep it factory strength and appearance, and it mounts to existing points. The car's exterior surface defines it, giving it a face whose streamlined shapes and contours help identify that it is a Mitsubishi Lancer. The internal reinforcement and energy managing sections allow collision forces to be distributed over a larger area, resulting in less deformation and lower repair costs. Replacement units made to the same specifications arrive with their own hardware that aligns holes and brackets for easy and secure attachment. The same quality standards that apply to the components installed at the assembly plant are also applied to all other components; therefore, owners can expect the same durability and fit. It is highly recommended that you keep a Bumper, as driving without a Bumper is against the law in other states. The Mitsubishi Lancer component effectively balances comfort with safety while maintaining the authentic design cues that are characteristic of a Mitsubishi Lancer.

OEM Bumper can boast superior quality and long-term durability. Each part meets strict factory specs and passes careful checks in production. So you'll get Bumper with long-lasting strength and an exact fit. If you need OEM Mitsubishi Lancer Bumper, the online store is the ideal place. The store carry a wide range of genuine Mitsubishi Lancer parts at the highly competitive prices. You'll enjoy a simple and no-hassle shopping experience. You'll get unbeatable prices and fast delivery service. You'll get the manufacturer's warranty and a straightforward return policy. Shop with confidence and keep your car in top condition.

Mitsubishi Lancer Bumper Parts Questions & Experts Answers

Bumper Cover
6400A911
Q: How to remove and install the front and rear bumpers on Mitsubishi Lancer?
A:
In the case of CE models you need to raise the bonnet and remove both turn signal lamps and further remove the bumper clips retaining the bumper to the body. If fog lamps are fitted, disconnect the wiring from the backs of the lamps, then in the wheel arch, remove the retaining clip on the splashguard and the screw at the top corner of the bumper, repeating on the other side. With assistance, unclip the clips at the front of the bumper under the car, remove the retaining bolts from the chassis rails and pull the bumper forwards. If required, detach the retaining clips and remove the bumper from the bracket. To install the bumper, simply follow the removal procedure in reverse. This will ensure the bumper is installed correctly, with all clips and wiring connected. To access the clips retaining the bottom of the bumper to the radiator support bracket, the front of the vehicle needs to be raised and supported on jack stands for CG and CH models. If fog lamps are fitted, unplug the wiring from the rear. Within the wheel arch, detach the clips holding the inner guard liner as well as the screw on the bumper top. With some help, detach the clips securing the bumper to the radiator support bracket and pull the bumper forward. When fitting the lamp, ensure that the clips and screws are secured and the wiring is reconnected. To install rear bumper on CE models, work under the bumper to take out the many clips that hold it to the body, then in the wheelarch take out the screws that hold the mud-flaps and the clip on the splashguard, repeating on the other side. Take away the retaining bolt at the top corner of the bumper on each side, then inside the vehicle remove the trim necessary to access the bumper retaining nuts and bolts. On Hatchback variants, first disconnect the wiring of number plate lamp and feed it through the body towards the bumper. Now with assistance withdraw the bumper. To install, reverse the removal procedure and securely tighten all fasteners. Finally on Hatchback models, connect the wiring to the number plate lamps. For CG and CH models, the removal of screws retaining mud-flaps and their clip on splashguard as well as the screw retaining the top of the bumper to the rear guard is a similar procedure done to drop the rear bumper. Take out the rear tail lamps assembly and accessible screws prior to arriving at the bumper retaining screws inside the vehicle. If your car has after-market reverse parking sensors, trace their wiring to find where it was spliced with the wiring harness and disconnect it; or simply remove the sensors and then with an assistant, pull off the bumper. To install components, perform removal operations in reverse order. Ensure all fasteners are securely tightened. Reconnect harness wiring. Install tail lamp assemblies.