How to remove and install the instrument cluster on Mitsubishi Lancer?

To remove and install, release the steering column adjusting lever and then set the column to its lowest position. After that, undo the retaining screws of the instrument cluster cover panel and pull it away firmly to withdraw it from the instrument cluster. For CG and CH models, remove the panel containing the power mirror switch also. Next, unplug the cluster wires and by, unclip a couple of clips. Then, remove the instrument cluster mounting screws and pull the instrument cluster from the dashboard. Some CG and CH models, the cluster will have to come out part way to unplug the wire connector. For installation, place the cluster back in the dashboard. Ensure all wiring connectors are hooked correctly to the instrument cluster's rear sockets. Finally, tighten the retaining screws of the instrument cluster and cover panel properly. To dismantle the cluster, first, remove it and release the lens retention tabs and withdraw it. Never touch the face of the mask or gauges with bare hands to prevent any staining. Next, disengage the tabs that secure the mask and remove it. To remove the gauges, you need to take out the retaining screws from the back of the instrument cluster and withdraw the applicable gauge from the front. In case of removing a warning or illumination lamp bulb, rotate the lamp holder in anti-direction of clock and withdraw. Then, pull the bulb from the lamp holder. For fitting, place the bulb back into the holder and secure it by turning it in the clockwise direction. Ensure that the gauge is installed properly and tighten the bolts to hold the retaining screws in position. In the end, fit the mask and the lens, after checking and confirming the absence of dust or foreign matter and the secure holding of retaining tabs during the installation of the instrument cluster.

Genuine Mitsubishi Lancer Instrument Cluster

Speedometer Instrument Cluster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Instrument Clusters found

View related parts
Mitsubishi Lancer Instrument Panel Beige Part Number: MR648054
$295.48 MSRP: $417.35
You Save: $121.87 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel, Instrument; Instrument Cluster
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2004-2005 Mitsubishi Lancer | ES, LS, OZ Rally, Ralliart, Sportback, Sportback Ralliart | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lancer Instrument Cluster Part Number: 8100A055
$496.93 MSRP: $701.88
You Save: $204.95 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Meter Assembly, Combination; Speedometer; Tachometer; Cluster
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mitsubishi Lancer | ES, Evolution, Evolution MR, Evolution RS, Evolution SE, SE | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Lancer Cluster Bezel Part Number: 8060A047XA
$87.78 MSRP: $121.91
You Save: $34.13 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bezel, Combination Meter; Instrument Cluster
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2008-2017 Mitsubishi Lancer | DE, ES, ES Sportback, Evolution GSR, Evolution MR, Evolution MR Touring, Evolution SE, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lancer Instrument Cluster Part Number: 8100A632
$606.26 MSRP: $790.43
You Save: $184.17 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Meter Assembly, Combination; Speedometer; Tachometer; Cluster
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2009 Mitsubishi Lancer | ES, Ralliart | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Lancer Instrument Cluster Part Number: 8100B454
$681.84 MSRP: $888.97
You Save: $207.13 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Meter Assembly, Combination; Speedometer; Tachometer; Cluster Assembly; Cluster
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2011 Mitsubishi Lancer | GTS, GTS Sportback, Ralliart, Ralliart Sportback | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lancer Instrument Cluster Part Number: 8100A645
$682.45 MSRP: $889.77
You Save: $207.32 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Meter Assembly, Combination; Speedometer; Tachometer; Cluster Assembly
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2008 Mitsubishi Lancer | Evolution GSR, Evolution MR | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Lancer Instrument Cluster Part Number: 8100C069
$726.17 MSRP: $946.77
You Save: $220.60 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Meter Assembly, Combination; Speedometer; Tachometer; Cluster
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2013-2015 Mitsubishi Lancer | DE, ES, ES Sportback, GT, GT Sportback, Ralliart, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lancer Instrument Cluster Part Number: 8100B208
$761.32 MSRP: $992.60
You Save: $231.28 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Meter Assembly, Combination; Speedometer; Tachometer; Cluster Assembly
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2010 Mitsubishi Lancer | Evolution GSR, Evolution MR, Evolution MR Touring, Evolution SE | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Lancer Instrument Panel Part Number: 8000A100XA
$762.09 MSRP: $993.60
You Save: $231.51 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel, Instrument; Instrument Cluster
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2008-2017 Mitsubishi Lancer | DE, ES, ES Sportback, Evolution GSR, Evolution MR, Evolution MR Touring, Evolution SE, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lancer Cluster Assembly Part Number: 8100A489
$778.89 MSRP: $1015.51
You Save: $236.62 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Meter Assembly, Combination; Instrument Cluster; Speedometer; Tachometer; Cluster
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mitsubishi Lancer | GTS | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lancer Instrument Cluster Part Number: 8100B464
$783.53 MSRP: $1021.00
You Save: $237.47 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Meter Assembly, Combination; Speedometer; Tachometer; Cluster
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2011-2012 Mitsubishi Lancer | DE, ES, ES Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lancer Instrument Cluster Part Number: 8100B460
$784.17 MSRP: $1022.38
You Save: $238.21 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Meter Assembly, Combination; Speedometer; Tachometer; Cluster Assembly
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2011 Mitsubishi Lancer | Evolution GSR, Evolution MR, Evolution MR Touring | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Lancer Instrument Panel Black Part Number: 8000A212XA
$810.65 MSRP: $1056.91
You Save: $246.26 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel, Instrument, Black; Instrument Cluster
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2009-2015 Mitsubishi Lancer | Evolution GSR, Evolution MR, Evolution MR Touring, Evolution SE, Ralliart, Ralliart Sportback, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lancer Instrument Cluster Part Number: 8100C034
$826.33 MSRP: $1077.35
You Save: $251.02 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Meter Assembly, Combination; Speedometer; Tachometer; Cluster Assembly; Cluster
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2013-2017 Mitsubishi Lancer | DE, ES, ES Sportback, GT, GT Sportback, Ralliart, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lancer Instrument Cluster Part Number: 8100C065
$835.25 MSRP: $1088.98
You Save: $253.73 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Meter Assembly, Combination; Speedometer; Tachometer; Cluster Assembly
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2013-2015 Mitsubishi Lancer | Evolution GSR, Evolution MR | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Lancer Instrument Cluster Part Number: 8100B212
$896.84 MSRP: $1169.28
You Save: $272.44 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Meter Assembly, Combination; Speedometer; Tachometer; Cluster
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2010 Mitsubishi Lancer | ES, GTS, Ralliart, Ralliart Sportback | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lancer Instrument Cluster Part Number: 8100C054
$945.32 MSRP: $1232.50
You Save: $287.18 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Meter Assembly, Combination; Speedometer; Tachometer; Cluster Assembly; Cluster
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 2013-2017 Mitsubishi Lancer | ES, GT, GT Sportback, Ralliart, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Mitsubishi Lancer Instrument Cluster

The Mitsubishi Lancer Instrument Cluster is the primary information source that is located directly behind the steering wheel. It allows the driver to know what is happening in real time with the vehicle. The speedometer, tachometer, and fuel gauge provide continuous readings related to speed, engine revolutions, and remaining fuel, respectively. Plus, warning lights for particular engine conditions, exterior lights, and seat belt use are also available. The assembly is designed to concentrate key gauges and indicators in one location to allow the driver to monitor critical information without taking eyes off the road. It enables safe vehicle operation while on the road. The Instrument Cluster lights the gauges and icons so that you can read it under different conditions of light. Each symbol or needle indicates a certain performance or readiness. Through the Instrument Cluster housing a plethora of functions, just at a glance one can know whether the vehicle is within the right speed range, whether the fuel remains enough, and whether a system alert is triggered. All Mitsubishi Lancer vehicles utilize this cluster to convert either electronic or mechanical sensor inputs into visual indications that the driver can easily read. The functionality of the Instrument Cluster therefore ensures that the Mitsubishi operates seamlessly. A lucid usage of this display will help any Lancer driver quickly respond to changes in driving conditions. This way, the Mitsubishi machine as well as its occupants can remain safe while having a more pleasant Lancer experience.

OEM Instrument Cluster can boast superior quality and long-term durability. Each part meets strict factory specs and passes careful checks in production. So you'll get Instrument Cluster with long-lasting strength and an exact fit. If you need OEM Mitsubishi Lancer Instrument Cluster, the online store is the ideal place. The store carry a wide range of genuine Mitsubishi Lancer parts at the highly competitive prices. You'll enjoy a simple and no-hassle shopping experience. You'll get unbeatable prices and fast delivery service. You'll get the manufacturer's warranty and a straightforward return policy. Shop with confidence and keep your car in top condition.

Mitsubishi Lancer Instrument Cluster Parts Questions & Experts Answers

Instrument Cluster
8100A055
Q: How to remove and install the instrument cluster on Mitsubishi Lancer?
A:
To remove and install, release the steering column adjusting lever and then set the column to its lowest position. After that, undo the retaining screws of the instrument cluster cover panel and pull it away firmly to withdraw it from the instrument cluster. For CG and CH models, remove the panel containing the power mirror switch also. Next, unplug the cluster wires and by, unclip a couple of clips. Then, remove the instrument cluster mounting screws and pull the instrument cluster from the dashboard. Some CG and CH models, the cluster will have to come out part way to unplug the wire connector. For installation, place the cluster back in the dashboard. Ensure all wiring connectors are hooked correctly to the instrument cluster's rear sockets. Finally, tighten the retaining screws of the instrument cluster and cover panel properly. To dismantle the cluster, first, remove it and release the lens retention tabs and withdraw it. Never touch the face of the mask or gauges with bare hands to prevent any staining. Next, disengage the tabs that secure the mask and remove it. To remove the gauges, you need to take out the retaining screws from the back of the instrument cluster and withdraw the applicable gauge from the front. In case of removing a warning or illumination lamp bulb, rotate the lamp holder in anti-direction of clock and withdraw. Then, pull the bulb from the lamp holder. For fitting, place the bulb back into the holder and secure it by turning it in the clockwise direction. Ensure that the gauge is installed properly and tighten the bolts to hold the retaining screws in position. In the end, fit the mask and the lens, after checking and confirming the absence of dust or foreign matter and the secure holding of retaining tabs during the installation of the instrument cluster.