What are the steps and considerations involved in overhauling or replacing a power steering pump on Mitsubishi Lancer?

Due to the knowledge and specialised equipment required, overhauling a steering pump is not usually practical for home mechanics. In case of a fault occurring, it is recommended to replace the steering pump with an exchange unit of an authorized dealer or steering specialist. Dismounting the steering pump calls for removing the drive belt before cleaning the exterior to avoid contamination. To catch fluid, place a container under the pump. Loosen the hose clamp and disconnect the suction hose. Before disconnecting the banjo fitting from the assembly, remember the position of the pressure connection line on the unit, and discard the O rings from the fitting after removing the nut and washer. Remove the wiring from the pressure switch and then, depending on the model, remove the pivot and tensioner bolts or mounting bolts to remove the pump. To install, you reverse the removal steps but do not yet tighten the pump and tensioner. Check the electrical connection is secure, use new O rings on the pressure line, reconnect the suction hose with a tight clamp, and lastly fit the drive belt. Afterward, refill and bleed the hydraulic steering system.

Genuine Mitsubishi Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Power Steering Pumps found

View related parts
Mitsubishi Power Steering Pump Part Number: MN101061
$626.66 MSRP: $817.03
You Save: $190.37 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Pump Assembly, Power Steering; Pump
Fits the following Mitsubishi Models:
- Eclipse | 2006-2012 | GS, GS Sport, SE, Spyder GS, Spyder GS Sport, Spyder SE | 4 Cyl 2.4 L GAS
- Galant | 2004-2012 | DE, ES, FE, SE, Sport Edition | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Power Steering Pump Part Number: MN184072
$700.14 MSRP: $912.83
You Save: $212.69 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Pump Assembly, Power Steering
Fits the following Mitsubishi Models:
- Lancer | 2004-2007 | ES, LS, OZ Rally, SE | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Power Steering Pump Part Number: MN100472
$714.11 MSRP: $931.05
You Save: $216.94 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Pump Assembly, Power Steering; Pump
Fits the following Mitsubishi Models:
- Outlander | 2004-2006 | LS, Limited, SE, XLS | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Power Steering Pump Part Number: MN184180
$768.39 MSRP: $1001.82
You Save: $233.43 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Pump Assembly, Power Steering; Pump
Fits the following Mitsubishi Models:
- Eclipse | 2006-2012 | GT, SE, Spyder GT | 6 Cyl 3.8 L GAS
- Galant | 2004-2009 | GTS, LS, Ralliart, Sport V6 | 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Power Steering Pump Part Number: 4450A149
$878.83 MSRP: $1145.80
You Save: $266.97 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Pump Assembly, Power Steering; Pump
Fits the following Mitsubishi Models:
- Outlander | 2007-2013 | ES, GT, LS, XLS | 6 Cyl 3.0 L GAS
View related parts
Mitsubishi Power Steering Pump Part Number: MR554841
$888.71 MSRP: $1158.69
You Save: $269.98 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Pump Assembly, Power Steering; Pump
Fits the following Mitsubishi Models:
- Lancer | 2003-2006 | Evolution, Evolution MR, Evolution RS, Evolution SE | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Power Steering Pump Part Number: 4450A137
$1002.45 MSRP: $1306.97
You Save: $304.52 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Pump Assembly, Power Steering
Fits the following Mitsubishi Models:
- Lancer | 2009-2015 | Ralliart, Ralliart Sportback, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Power Steering Pump Part Number: 4450A097
$1081.62 MSRP: $1410.20
You Save: $328.58 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Pump Assembly, Power Steering
Fits the following Mitsubishi Models:
- Lancer | 2010-2015, 2008 | Evolution Final Edition, Evolution GSR, Evolution MR, Evolution MR Touring, Evolution SE | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Power Steering Pump Part Number: 4450A260
$1224.08 MSRP: $1595.94
You Save: $371.86 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Pump Assembly, Power Steering
Fits the following Mitsubishi Models:
- Lancer | 2008-2017 | DE, ES, ES Sportback, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Outlander | 2008-2013 | ES, SE | 4 Cyl 2.4 L GAS

Mitsubishi Power Steering Pump

Mitsubishi Power Steering Pump supplies pressurized liquid to make every control feel lighter in weight. The pump is bolted to the engine. It spins with a belt. A spinning motion creates pressure. This pressure travels through high pressure lines. The pressure returns through a low pressure hose. A built-in valve balances the pressure when the wheel is centered. It then directs flow to one side of the steering piston when the driver turns to offer assistance without delay. A dedicated reservoir keeps air out and ensures smooth operation, while leaks, whining, or heavy parking effort warn that the Power Steering Pump needs a check as assistance is essential for predictable handling. By keeping hydraulic assistance consistent, the Power Steering Pump ensures easy maneuvering of all vehicles in the lineup. Mitsubishi is well reputed for its pragmatic innovation. It combines solid engineering with features that are simple and really fun to drive daily. MIVEC engines combine power with efficiency, while Super All Wheel Control grips gravel and wet pavement. Plug-in hybrids allow for quiet cruising, ideal for everyday commuters. The smartphone links, cruise control, and safety sensors work together as a team on the inside so families stay relaxed during long trips. Over a century ago, the firm started in shipping and continues to investigate bold fuel cell concepts and compact city vehicles for changing needs. Mitsubishi demonstrates that lasting reliability and everyday true comfort can share the same badge by concentrating on smart technology that remains user-friendly.

Pick genuine OEM Power Steering Pump if you want superb performance and durability that lasts. Mitsubishi builds that using high-grade materials and official factory techniques to meet very strict standards. This means you get parts you can actually trust for your daily drive. Finding the right parts is simple in the massive stock of genuine inventory. You can stop guessing if a part will fit or hold up. You will love the low prices, dependable service and the real manufacturer's warranty on Mitsubishi Power Steering Pump. Order today and the store will ship your brand-new items to your door as fast as possible.

Mitsubishi Power Steering Pump Parts Questions & Experts Answers

Power Steering Pump
MN184072
Q: What are the steps and considerations involved in overhauling or replacing a power steering pump on Mitsubishi Lancer?
A:
Due to the knowledge and specialised equipment required, overhauling a steering pump is not usually practical for home mechanics. In case of a fault occurring, it is recommended to replace the steering pump with an exchange unit of an authorized dealer or steering specialist. Dismounting the steering pump calls for removing the drive belt before cleaning the exterior to avoid contamination. To catch fluid, place a container under the pump. Loosen the hose clamp and disconnect the suction hose. Before disconnecting the banjo fitting from the assembly, remember the position of the pressure connection line on the unit, and discard the O rings from the fitting after removing the nut and washer. Remove the wiring from the pressure switch and then, depending on the model, remove the pivot and tensioner bolts or mounting bolts to remove the pump. To install, you reverse the removal steps but do not yet tighten the pump and tensioner. Check the electrical connection is secure, use new O rings on the pressure line, reconnect the suction hose with a tight clamp, and lastly fit the drive belt. Afterward, refill and bleed the hydraulic steering system.