Is it recommended to overhaul a defective Rack and Pinion steering gear, and how to remove and install on Mitsubishi Montero?

In case the Rack and Pinion is found to be defective, overhaul should not be attempted as special tools are required; you should get it overhauled by your dealer service department or replace it with a factory rebuilt unit. Nonetheless, you can uninstall it and install it back using the procedure that follows. The manual and power Rack and Pinion housing removal and installation procedures are the same except on power steering models, the inlet and outlet lines must be detached from the Rack and Pinion housing before the housing can be removed. After the gear is replaced, the power steering systems must be bled and the steering system must be filled. First, lift the front end of the car, place it on jackstands, and apply the parking brake. Subsequently, an alignment mark is placed on the steering shaft flexible coupling and the gear housing worm shaft prior to removal of the coupling pinch bolt. Uncouple the connections of the power steering line from the Rack and Pinion. Plug the lines to avoid leaking. Detach the Pitman arm as well as left tie-rod from relay rod. Remove the bolts holding the gear housing to the chassis, then lower the gear from the vehicle. The installation process is simply the removal procedure reversed, ensuring all nuts and bolts are tightened to specifications.

Genuine Mitsubishi Rack And Pinion

Steering Gear

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Rack And Pinions found

View related parts
Mitsubishi Gear Assembly Part Number: 4410A322
$1190.11 MSRP: $1440.81
You Save: $250.70 (18%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear & Link Assembly, Power Steering; Rack and Pinion; Steering Gear
Fits the following Mitsubishi Models:
- Outlander | 2003-2006 | LS, Limited, SE, XLS | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Steering Gear Part Number: 4410A338
$1275.78 MSRP: $1544.53
You Save: $268.75 (18%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear & Link Assembly, Power Steering; Rack and Pinion; Gear Assembly
Fits the following Mitsubishi Models:
- Lancer | 2009-2014 | Ralliart, Ralliart Sportback | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Steering Gear Part Number: 4410A026
$1320.36 MSRP: $1598.50
You Save: $278.14 (18%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear & Link Assembly, Power Steering; Rack and Pinion Assembly; Rack and Pinion; Rack & Pinion; Gear Assembly
Fits the following Mitsubishi Models:
- Outlander | 2007-2013 | ES, GT, LS, SE, XLS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mitsubishi Steering Gear Part Number: 4410A498
$1330.45 MSRP: $1610.71
You Save: $280.26 (18%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear & Link Assembly, Steering; Rack and Pinion; Gear Assembly; Rack Assembly
Fits the following Mitsubishi Models:
- Mirage | 2017-2024, 2014-2015 | BE, Black Edition, Carbonite Edition, DE, ES, GT, LE, RF, SE | 3 Cyl 1.2 L GAS
- Mirage G4 | 2017-2024 | BE, Carbonite Edition, ES, LE, RF, SE | 3 Cyl 1.2 L GAS
View related parts
Mitsubishi Steering Gear Part Number: 4410A323
$1350.82 MSRP: $1635.37
You Save: $284.55 (18%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear & Link Assembly, Power Steering; Rack and Pinion; Gear Assembly
Fits the following Mitsubishi Models:
- Outlander | 2003-2006 | LS, Limited, SE, XLS | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Steering Gear Part Number: 4410A192
$1404.06 MSRP: $1699.83
You Save: $295.77 (18%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear & Link Assembly, Power Steering; Rack and Pinion; Gear Assembly
Fits the following Mitsubishi Models:
- Lancer | 2008-2015 | Evolution Final Edition, Evolution GSR, Evolution MR, Evolution MR Touring, Evolution SE, Ralliart | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Steering Gear Part Number: 4410A006
$1460.86 MSRP: $1768.61
You Save: $307.75 (18%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear & Link Assembly, Power Steering; Rack and Pinion; Gear Assembly; Tie Rod Boot
Fits the following Mitsubishi Models:
- Lancer | 2008-2017 | DE, ES, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Outlander | 2008-2013 | ES, SE | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Steering Gear Part Number: 4410A671
$2095.57 MSRP: $2537.01
You Save: $441.44 (18%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Power Steering; Rack and Pinion; Gear Assembly
Fits the following Mitsubishi Models:
- Mighty Max | 1987-1990 | 1 Ton, Base, SPX, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
- Montero | 1987-1990 | Base, LS, RS, SP, Sport | 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
- Van | 1987-1990 | Base, LS | 4 Cyl 2.4 L GAS
View More
View related parts
Mitsubishi Gear Assembly Part Number: 4410A560
$2119.15 MSRP: $2565.56
You Save: $446.41 (18%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear & Link Assembly, Power Steering; Rack and Pinion; Steering Gear
Fits the following Mitsubishi Models:
- Lancer | 2011-2017 | DE, ES, ES Sportback, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Gear Assembly Part Number: 48001W100P
$645.00 MSRP: $840.93
You Save: $195.93 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear & Link Assembly, Steering; Rack and Pinion; Steering Gear; Rack Assembly
- Replaces: 4410A388
Fits the following Mitsubishi Models:
- Outlander | 2014-2018 | ES, LE, SE, SEL | 4 Cyl 2.4 L GAS
- Outlander PHEV | 2018-2019 | GT, SEL | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- Outlander Sport | 2011-2023 | BE, ES, GT, GT Special Edition, LE, S, SE, SE Special Edition, SEL, SP | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View More
View related parts
Mitsubishi Steering Gear Part Number: 48010W020P
$878.01 MSRP: $1144.75
You Save: $266.74 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear & Link Assembly, Steering; Rack and Pinion; Gear Assembly
- Replaces: 4410A557
Fits the following Mitsubishi Models:
- Outlander | 2014-2020 | GT | 6 Cyl 3.0 L GAS
View related parts
Mitsubishi Gear Assembly Part Number: 48010W050P
$1136.08 MSRP: $1481.20
You Save: $345.12 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear & Link Assembly, Steering; Rack and Pinion; Steering Gear; Rack Assembly
- Replaces: 4410A852
Fits the following Mitsubishi Models:
- Eclipse Cross | 2022-2025, 2018-2020 | Black Edition, ES, LE, Ralliart, SE, SE Special Edition, SEL, SEL Special Edition, SEL Touring, SP | 4 Cyl 1.5 L GAS
- Outlander | 2018-2020 | ES, LE, SE, SEL, SP | 4 Cyl 2.4 L GAS
- Outlander PHEV | 2019-2022 | GT, LE, SEL | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View More
View related parts
Mitsubishi Gear Assembly Part Number: 49001W090P
$1411.02 MSRP: $1708.26
You Save: $297.24 (18%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear & Link Assembly, Steering; Rack and Pinion
Fits the following Mitsubishi Models:
- Outlander | 2025 | ES, SE, SEL | 4 Cyl 2.5 L GAS
View related parts
Mitsubishi Gear Assembly Part Number: 49001W150P
$932.20 MSRP: $1215.38
You Save: $283.18 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear & Link Assembly, Steering; Rack and Pinion; Rack Assembly
Fits the following Mitsubishi Models:
- Outlander | 2022-2024 | Black Edition, ES, SE, SE Launch Edition, SEL, SEL Launch Edition | 4 Cyl 2.5 L GAS
- Outlander PHEV | 2023-2025 | ES, Platinum Edition, Ralliart, SE, SE Tech, SEL, SEL Premium, SEL Touring | 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Mitsubishi Rack Assembly Part Number: 4410A033
Product Specifications
- Other Name: Rack, Steering Gear; Rack and Pinion; Rack
Fits the following Mitsubishi Models:
- Galant | 2004-2012 | DE, ES, FE, SE, Sport Edition | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Steering Gear Part Number: 4410A011
Product Specifications
- Other Name: Gear & Link Assembly, Power Steering; Rack and Pinion; Gear Assembly
Fits the following Mitsubishi Models:
- Lancer | 2008 | DE, ES, GTS | 4 Cyl 2.0 L GAS

Mitsubishi Rack And Pinion

The Mitsubishi Rack And Pinion mechanism transforms the turning motion of the driver's steering wheel into side-to-side motion. This gives every vehicle in the range quick, assured response and a connected road feel that enhances everyday control. A shipping company established in 1870, Mitsubishi has become a Japanese multinational automotive manufacturer, distinguished for its dependability, innovation, and technology. In 1917, the firm produced the Model A and progressed to MIVEC variable valve engines and Super All Wheel Control that helps deliver balance on slippery roads as well as convenient features such as cruise control and smartphone connectivity that make daily driving simple and safe. These days, Mitsubishi is experimenting with plug-in hybrids alongside further fuel cell research and smart safety sensors, all designed to ensure everyday innovations that work for drivers easily. The Rack And Pinion system within the steering system consists of a small pinion gear and a large metal housing rack gear. Essentially, as the pinion turns, which is part of the steering column, it creates a linear motion that pushes the tie-rods either left or right and assists the other front wheel in perfect unison. Robustly mounted to the chassis, this Rack And Pinion device minimizes play while maintaining suspension alignment and delivering proportional feedback whether making small corrections or a full turn in a parking lot. Due to the fact that the control mechanism is based on a direct gear-on-gear system, it stays lightweight, efficient, and easy to service. It also reinforces the brand's aim of marrying smart engineering with everyday durability while helping to ensure wheel angle changes smoothly match steering commands.

Pick genuine OEM Rack And Pinion if you want superb performance and durability that lasts. Mitsubishi builds that using high-grade materials and official factory techniques to meet very strict standards. This means you get parts you can actually trust for your daily drive. Finding the right parts is simple in the massive stock of genuine inventory. You can stop guessing if a part will fit or hold up. You will love the low prices, dependable service and the real manufacturer's warranty on Mitsubishi Rack And Pinion. Order today and the store will ship your brand-new items to your door as fast as possible.

Mitsubishi Rack And Pinion Parts Questions & Experts Answers

Steering Gear
4410A671
Q: Is it recommended to overhaul a defective Rack and Pinion steering gear, and how to remove and install on Mitsubishi Montero?
A:
In case the Rack and Pinion is found to be defective, overhaul should not be attempted as special tools are required; you should get it overhauled by your dealer service department or replace it with a factory rebuilt unit. Nonetheless, you can uninstall it and install it back using the procedure that follows. The manual and power Rack and Pinion housing removal and installation procedures are the same except on power steering models, the inlet and outlet lines must be detached from the Rack and Pinion housing before the housing can be removed. After the gear is replaced, the power steering systems must be bled and the steering system must be filled. First, lift the front end of the car, place it on jackstands, and apply the parking brake. Subsequently, an alignment mark is placed on the steering shaft flexible coupling and the gear housing worm shaft prior to removal of the coupling pinch bolt. Uncouple the connections of the power steering line from the Rack and Pinion. Plug the lines to avoid leaking. Detach the Pitman arm as well as left tie-rod from relay rod. Remove the bolts holding the gear housing to the chassis, then lower the gear from the vehicle. The installation process is simply the removal procedure reversed, ensuring all nuts and bolts are tightened to specifications.