How to remove and install the air cleaner assembly and Shift Cable in the Manual transaxle on Mitsubishi Lancer?

To remove the air cleaner assembly, first work in the engine compartment and detach it. The clips that are clamped on the transaxle selector levers of Shift Cables must now be removed after noting their installed position. Next remove the washers and disconnect the cables from the selector lever pins. With the use of a thin screwdriver, carefully push the ends of the tabs outwards on the cable retaining clips and prise the cables from the bracket. Be careful that you do not damage the tabs with your screwdriver. From inside the vehicle, remove the selector lever assembly as previously described, remove the bolts holding the driver side footrest and withdraw it from the vehicle. To gain more clearance to remove the nuts securing cover panel to firewall, push the bracket away and fold the carpet down away from the bracket. When working on inside wires, the end must be wrapped in a clean cloth to save the seats. To install it, reversal of removal is required. Route the cables through the firewall with the arrow on the cover panel pointing upwards. Tighten the retaining nuts to torque to specifications. Put the throttle selector lever assembly in place and attach the Shift Cables to this lever arm. Following the noted position of the washers, connect the Shift Cables to the selector lever pins located in the engine compartment and install retaining clips. Ultimately, install the air cleaner assembly and carry out a road test to ensure the satisfactory movement of gears.

Genuine Mitsubishi Shift Cable

Transmission Shift Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

26 Shift Cables found

View related parts
Mitsubishi Shift Control Cable Part Number: 2430A127
$135.89 MSRP: $184.14
You Save: $48.25 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Gearshift; Shift Cable; Control Cable
Fits the following Mitsubishi Models:
- Mirage | 2017-2024, 2014-2015 | BE, Black Edition, Carbonite Edition, DE, ES, GT, LE, RF, SE | 3 Cyl 1.2 L GAS
- Mirage G4 | 2017-2024 | BE, Carbonite Edition, ES, LE, RF, SE | 3 Cyl 1.2 L GAS
View related parts
Mitsubishi Shift Control Cable Part Number: 2430A226
$164.66 MSRP: $223.11
You Save: $58.45 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Gearshift; Shift Cable; Cable
Fits the following Mitsubishi Models:
- Eclipse Cross | 2022-2025, 2018-2020 | Black Edition, ES, LE, Ralliart, SE, SE Special Edition, SEL, SEL Special Edition, SEL Touring, SP | 4 Cyl 1.5 L GAS
View related parts
Mitsubishi Shift Control Cable Part Number: 2430A266
$179.10 MSRP: $242.68
You Save: $63.58 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Gearshift; Shift Cable; Control Cable
Fits the following Mitsubishi Models:
- Outlander | 2018-2020 | ES, GT, LE, SE, SEL, SP | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mitsubishi Shift Control Cable Part Number: 2430A253
$187.61 MSRP: $254.22
You Save: $66.61 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Gearshift; Shift Cable; Cable
Fits the following Mitsubishi Models:
- Outlander Sport | 2018-2025 | BE, ES, GT, GT Special Edition, LE, Ralliart, S, SE, SE Special Edition, SEL, SP, Trail Edition | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Shift Control Cable Part Number: 2460A037
$191.52 MSRP: $259.51
You Save: $67.99 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Gearshift; Shift Cable; Cable
- Replaces: 2460A143
Fits the following Mitsubishi Models:
- Lancer | 2008-2017 | ES, ES Sportback, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Outlander Sport | 2011-2019 | ES, GT, LE, SE, SEL, SP | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Shift Control Cable Part Number: 2430A254
$192.13 MSRP: $260.33
You Save: $68.20 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Gearshift; Shift Cable; Cable
Fits the following Mitsubishi Models:
- Outlander Sport | 2017-2018 | ES, GT, LE, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Shift Control Cable Part Number: 2460A112
$194.73 MSRP: $263.87
You Save: $69.14 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Gearshift; Shift Cable; Control Cable
Fits the following Mitsubishi Models:
- Mirage | 2017-2022, 2014-2015 | Black Edition, Carbonite Edition, DE, ES, GT, LE, RF, SE | 3 Cyl 1.2 L GAS
- Mirage G4 | 2017-2022 | BE, Carbonite Edition, ES, LE, RF, SE | 3 Cyl 1.2 L GAS
View related parts
Mitsubishi Shift Control Cable Part Number: 2430A132
$196.54 MSRP: $266.31
You Save: $69.77 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Gearshift; Shift Cable; Control Cable
Fits the following Mitsubishi Models:
- Outlander | 2014-2018 | ES, GT, LE, SE, SEL | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mitsubishi Cable Assembly Part Number: 2342A019
$84.23 MSRP: $116.99
You Save: $32.76 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Clutch; Clutch Cable; Shift Cable; Shift Control Cable
Fits the following Mitsubishi Models:
- Mirage | 2017-2022, 2014-2015 | Black Edition, Carbonite Edition, DE, ES, GT, LE, RF, SE | 3 Cyl 1.2 L GAS
- Mirage G4 | 2017-2024 | BE, Carbonite Edition, ES, LE, RF, SE | 3 Cyl 1.2 L GAS
View related parts
Mitsubishi Shift Control Cable Part Number: MR528271
$114.66 MSRP: $159.25
You Save: $44.59 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Gearshift; Shift Cable
Fits the following Mitsubishi Models:
- Lancer | 2002-2007 | ES, Evolution, Evolution MR, Evolution RS, Evolution SE, LS, OZ Rally, Ralliart, SE, Sportback, Sportback Ralliart | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Shift Control Cable Part Number: 2430A024
$116.57 MSRP: $161.90
You Save: $45.33 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Gearshift; Shift Cable
Fits the following Mitsubishi Models:
- Lancer | 2008-2017 | DE, ES, ES Sportback, GT, GT Sportback, GTS, GTS Sportback, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Shift Control Cable Part Number: 2430A097
$125.87 MSRP: $170.56
You Save: $44.69 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Gearshift; Shift Cable
Fits the following Mitsubishi Models:
- Lancer | 2008-2015 | Evolution Final Edition, Evolution GSR, Evolution MR, Evolution MR Touring, Evolution SE, Ralliart, Ralliart Sportback | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Shift Control Cable Part Number: MR980250
$145.04 MSRP: $196.53
You Save: $51.49 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Gearshift; Shift Cable
Fits the following Mitsubishi Models:
- Outlander | 2003-2006 | LS, Limited, SE, XLS | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Shift Control Cable Part Number: MR580313
$185.16 MSRP: $250.90
You Save: $65.74 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Gearshift; Shift Cable
Fits the following Mitsubishi Models:
- Outlander | 2005-2006 | LS, Limited, SE, XLS | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Shift Control Cable Part Number: 2430A092
$187.10 MSRP: $253.52
You Save: $66.42 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Gearshift; Shift Cable
- Replaces: 2430A163
Fits the following Mitsubishi Models:
- Outlander | 2008-2013 | ES, SE | 4 Cyl 2.4 L GAS
- Outlander Sport | 2011-2016 | ES, GT, LE, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Shift Control Cable Part Number: 2460A103
$191.52 MSRP: $259.51
You Save: $67.99 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Gearshift; Shift Cable
Fits the following Mitsubishi Models:
- Lancer | 2010-2015 | Evolution Final Edition, Evolution GSR, Evolution MR, Evolution MR Touring, Evolution SE | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Shift Control Cable Part Number: 2430A137
$191.90 MSRP: $260.04
You Save: $68.14 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Gearshift; Shift Cable
Fits the following Mitsubishi Models:
- Outlander | 2014-2020
View related parts
Mitsubishi Shift Control Cable Part Number: MR580533
$192.24 MSRP: $260.48
You Save: $68.24 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Gearshift; Shift Cable
Fits the following Mitsubishi Models:
- Lancer | 2005-2006 | Evolution, Evolution MR, Evolution RS, Evolution SE | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Shift Control Cable Part Number: 2460A088
$198.87 MSRP: $269.47
You Save: $70.60 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Gearshift; Shift Cable
Fits the following Mitsubishi Models:
- Lancer | 2008 | Evolution GSR, Evolution MR | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Shift Control Cable Part Number: 2430A012
Product Specifications
- Other Name: Cable, Gearshift; Shift Cable
Fits the following Mitsubishi Models:
- Outlander | 2007-2013 | ES, GT, LS, XLS | 6 Cyl 3.0 L GAS

| Page 1 of 2 |Next >

1-20 of 26 Results

Mitsubishi Shift Cable

Mitsubishi Shift Cable converts the choice of gear by the driver to direct and precise movement at the transmission, so each shift becomes firm and sure. This Shift Cable is installed within a protective case, which passes easily around engine parts, and the steel core slides easily with minimum friction, so that movement at the cabin shifter is immediately translated into fine leverage at the gearbox. Intact cable provides tight feedback, assists the transmission to latch into Park or a selected drive ratio, and prevents the loose feel or missed gear caused by stretching or broken bushings. When the assembly becomes worn, such signs as excess play or stubborn engagement are indications that the assembly requires urgent replacement to regain confident control. In addition to this vital connection, Mitsubishi manufactures cars that strike a balance between sound mechanics and intelligent everyday comfort. The automotive heritage dates back more than a century and the brand combines fuel efficiency MIVEC engines, optional Super All Wheel Control to allow the car to corner steadily, and a comfortable cruise and smartphone integration to make long journeys enjoyable. Drivers like the way that the brand is concerned with simple functionality, be it maneuvering an agile compact in a traffic jam or packing an adventurous crossover in a weekend getaway, and the continued investigation into new propulsion and safety technology demonstrates a desire to move forward. This commitment to affordable performance and innovation is in addition to the reliable Shift Cable, which allows owners to rely on all the parts of the broader Mitsubishi family.

Pick genuine OEM Shift Cable if you want superb performance and durability that lasts. Mitsubishi builds that using high-grade materials and official factory techniques to meet very strict standards. This means you get parts you can actually trust for your daily drive. Finding the right parts is simple in the massive stock of genuine inventory. You can stop guessing if a part will fit or hold up. You will love the low prices, dependable service and the real manufacturer's warranty on Mitsubishi Shift Cable. Order today and the store will ship your brand-new items to your door as fast as possible.

Mitsubishi Shift Cable Parts Questions & Experts Answers

Shift Control Cable
MR528271
Q: How to remove and install the air cleaner assembly and Shift Cable in the Manual transaxle on Mitsubishi Lancer?
A:
To remove the air cleaner assembly, first work in the engine compartment and detach it. The clips that are clamped on the transaxle selector levers of Shift Cables must now be removed after noting their installed position. Next remove the washers and disconnect the cables from the selector lever pins. With the use of a thin screwdriver, carefully push the ends of the tabs outwards on the cable retaining clips and prise the cables from the bracket. Be careful that you do not damage the tabs with your screwdriver. From inside the vehicle, remove the selector lever assembly as previously described, remove the bolts holding the driver side footrest and withdraw it from the vehicle. To gain more clearance to remove the nuts securing cover panel to firewall, push the bracket away and fold the carpet down away from the bracket. When working on inside wires, the end must be wrapped in a clean cloth to save the seats. To install it, reversal of removal is required. Route the cables through the firewall with the arrow on the cover panel pointing upwards. Tighten the retaining nuts to torque to specifications. Put the throttle selector lever assembly in place and attach the Shift Cables to this lever arm. Following the noted position of the washers, connect the Shift Cables to the selector lever pins located in the engine compartment and install retaining clips. Ultimately, install the air cleaner assembly and carry out a road test to ensure the satisfactory movement of gears.