How to remove and install the Wiper Arm and Wiper Blade on Mitsubishi Diamante?

To remove and install wiper arms (including rear wiper arms, if applicable, on Diamante Wagon and Mirage Hatchs), start by disconnecting the negative battery terminal. After that, Take off the cap, unscrew the cap nuts, and lift the arms from the linkage posts to remove the windshield wiper arms. Installation involves fastening the wiper blade and arm assemblies and tightening the retaining nuts to 7 to 12 ft. lbs. (10-16 Nut meters) The arm which fits on the driver's side should bear a D or Dr mark whereas the A or As mark is for the passenger's side (the mark is stencilled at the base of the arm near where it pivots). The arms should be installed so that the blades are parked 1 inch from the garnish molding. Reconnect the negative cable on the battery, and make sure the wiper system works.

Genuine Mitsubishi Diamante Wiper Blade

Windshield Wiper Blade

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wiper Blades found

View related parts
Mitsubishi Diamante Blade Assembly Refill Part Number: MB821509
$11.03 MSRP: $14.37
You Save: $3.34 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade, Windshield Wiper; Windshield Wiper; Wiper Blade; Blade Assembly; Blade Insert; Wiper Insert; Insert; Blade
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 1992-1996 Mitsubishi Diamante | ES, LS | 6 Cyl 3.0 L GAS
View related parts
Mitsubishi Diamante Blade Assembly Part Number: MZ690157
$13.91 MSRP: $18.12
You Save: $4.21 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade Assembly Wiper Right-Hand VS; Windshield Wiper; Wiper Blade
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 1993-1995 Mitsubishi Diamante | ES | 6 Cyl 3.0 L GAS
View related parts
Mitsubishi Diamante Blade Assembly Part Number: MZ693017
$12.10 MSRP: $14.95
You Save: $2.85 (20%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wiper Blade Assembly 20" A; Windshield Wiper; Wiper Blade; Blade
- Replaces: MZ690947
- Warranty: This genuine part is guaranteed by Mitsubishi's factory warranty.
Fits the following Vehicles:
- 1993-1995 Mitsubishi Diamante | ES | 6 Cyl 3.0 L GAS

Mitsubishi Diamante Wiper Blade

OEM Wiper Blade can boast superior quality and long-term durability. Each part meets strict factory specs and passes careful checks in production. So you'll get Wiper Blade with long-lasting strength and an exact fit. If you need OEM Mitsubishi Diamante Wiper Blade, the online store is the ideal place. The store carry a wide range of genuine Mitsubishi Diamante parts at the highly competitive prices. You'll enjoy a simple and no-hassle shopping experience. You'll get unbeatable prices and fast delivery service. You'll get the manufacturer's warranty and a straightforward return policy. Shop with confidence and keep your car in top condition.

Mitsubishi Diamante Wiper Blade Parts Questions & Experts Answers

Blade Assembly Refill
MB821509
Q: How to remove and install the Wiper Arm and Wiper Blade on Mitsubishi Diamante?
A:
To remove and install wiper arms (including rear wiper arms, if applicable, on Diamante Wagon and Mirage Hatchs), start by disconnecting the negative battery terminal. After that, Take off the cap, unscrew the cap nuts, and lift the arms from the linkage posts to remove the windshield wiper arms. Installation involves fastening the wiper blade and arm assemblies and tightening the retaining nuts to 7 to 12 ft. lbs. (10-16 Nut meters) The arm which fits on the driver's side should bear a D or Dr mark whereas the A or As mark is for the passenger's side (the mark is stencilled at the base of the arm near where it pivots). The arms should be installed so that the blades are parked 1 inch from the garnish molding. Reconnect the negative cable on the battery, and make sure the wiper system works.