How to remove and install the Air Filter on Mitsubishi Lancer?

For removing and installing the Air Filter, release the retaining clips separating rear housing from front cover and slide the element out. Detach the PCV hose from the air inlet hose and, if applicable, detach the wiring from the air flow sensor. Loosen clamps on the air inlet hose, which connects to the throttle body and rear housing (models other than 2.4 litres). Remove the air intake hose (and resonator, if necessary). Move the rear housing down and away from the front cover to release it and pull the rear housing out. Remove the bolts securing the front cover to the vehicle body, lifting the air intake out of the inner guard. Remove the two scrivets from the air intake at the front cover, loosen the clamps on the air inlet hos, and similarly disengage and remove the rear housing and front cover, for 2.4 litre models. Cleaning all parts other than the element and air flow sensor with a damp cloth. Check for splits or other damage in the rear housing, front cover and intake hose and that these do seal properly around the Air Filter. To install, reverse the removal steps. Ensure the housing retaining bolts are securely tightened. Also ensure that the element is fully seated, the air flow sensor wiring is plugged in, and all hose clamps are securely tightened.

How should the air filter be replaced and maintained on Mitsubishi Montero?

You should replace the air filter with a new one at specified intervals, and periodic inspections should occur as part of a preventive maintenance program, particularly when the car is constantly driven on dusty roads. The air filter sits in the air cleaner housing attached at the top of the carburetor on conventional models and at the right front corner of the engine compartment on fuel-injected models. In carbureted models, first, unclamp the clips, and then release the wing nut, which will allow you to lift the top plate from the air cleaner housing. After that, take out the air filter from the housing; replace it if it is dirty. Using a rag, wipe the inside of the air cleaner housing and replace the top plate. If the old filter is in acceptable condition, put it back into the housing. If it is not in good condition, place a new filter in the housing. Tighten the wing nut and snap the clips into place. For fuel injected models with round filter housing remove intake air hose, unclip, and pull out air flow sensor from housing. Take out the old filter element (do not touch the air flow sensor, when present), and replace it if dirty. Install the new filter element aligning the tabs to the air flow sensor body and install the clips. Lastly, attach the air intake hose, making sure there are no air leaks. Remove the clips on the rectangular filter housing, pull the cover up, and lift the filter. If it's dirty, replace it. Wipe the inside of a housing, put the old or new filter inside, place the cover back on, and put on the clips.

Genuine Mitsubishi Air Filter

Air Cleaner

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Air Filters found

View related parts
Mitsubishi Air Filter Part Number: MZ690196
$58.21 MSRP: $80.85
You Save: $22.64 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Element, Air Cleaner VS; Element
Fits the following Mitsubishi Models:
- Montero | 1994-2000 | Base, LS, SR | 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
- Montero Sport | 1999-2004 | LS, Limited, XLS, XS | 6 Cyl 3.5 L GAS
View related parts
Mitsubishi Air Filter Part Number: MZ690445
$18.37 MSRP: $23.95
You Save: $5.58 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Element, Air Cleaner VS; Air Filter Insert; Engine Air Filter; Element
Fits the following Mitsubishi Models:
- Lancer | 2008-2016 | DE, ES, ES Sportback, Evolution GSR, Evolution MR, Evolution MR Touring, Evolution SE, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Outlander | 2007-2013 | ES, GT, LS, SE, XLS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander Sport | 2011-2012 | ES, SE | 4 Cyl 2.0 L GAS
View More
View related parts
Mitsubishi Air Filter Part Number: MR968274
$18.37 MSRP: $23.95
You Save: $5.58 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Element, Air Cleaner, NON; Air Filter Insert; Engine Air Filter
- Replaces: 1500A513, MZ690990
Fits the following Mitsubishi Models:
- Lancer | 2012-2017 | DE, ES, ES Sportback, GT, GT Sportback, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Outlander | 2014-2020 | ES, GT, LE, SE, SEL, SP | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander Sport | 2013-2025 | BE, ES, GT, GT Special Edition, LE, Ralliart, S, SE, SE Special Edition, SEL, SP, Trail Edition | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View More
View related parts
Mitsubishi Air Filter Part Number: MR571396
$18.37 MSRP: $23.95
You Save: $5.58 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Element, Air Cleaner N/W; Engine Air Filter; Element
Fits the following Mitsubishi Models:
- Eclipse | 2006-2012 | GS, GS Sport, GT, SE, Spyder GS, Spyder GS Sport, Spyder GT, Spyder SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
- Endeavor | 2010-2011, 2004-2008 | LS, Limited, SE, XLS | 6 Cyl 3.8 L GAS
- Galant | 2004-2012 | DE, ES, FE, GTS, LS, Ralliart, SE, Sport Edition, Sport V6 | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
View More
View related parts
Mitsubishi Air Filter Part Number: MB906051
$18.37 MSRP: $23.95
You Save: $5.58 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Element, Air Cleaner; Engine Air Filter; Filter Element; Element
Fits the following Mitsubishi Models:
- Eclipse | 1995-2005 | Base, GS, GST, GSX, GT, GTS, RS, Spyder GS, Spyder GST, Spyder GT, Spyder GTS | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Expo | 1992-1995 | Base, SP | 4 Cyl 2.4 L GAS
- Expo LRV | 1992-1994 | Base, Sport | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
- Galant | 1994-2003 | DE, ES, GS, GTZ, LS, S | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View More
View related parts
Mitsubishi Air Filter Part Number: 1500A617
$18.37 MSRP: $23.95
You Save: $5.58 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Element, Air Cleaner, PAP; Air Filter Insert; Engine Air Filter
- Replaces: MZ690991
Fits the following Mitsubishi Models:
- Mirage | 2017-2024, 2014-2015 | BE, Black Edition, Carbonite Edition, DE, ES, GT, LE, RF, SE | 3 Cyl 1.2 L GAS
- Mirage G4 | 2017-2024 | BE, Carbonite Edition, ES, LE, RF, SE | 3 Cyl 1.2 L GAS
View related parts
Mitsubishi Air Filter Part Number: MZ690194
$20.33 MSRP: $26.48
You Save: $6.15 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Element, Air Cleaner VS; Element
Fits the following Mitsubishi Models:
- 3000GT | 1991-1999 | Base, SL, Spyder SL, Spyder VR-4, VR-4 | 6 Cyl 3.0 L GAS
- Diamante | 1992-1996 | ES, LS | 6 Cyl 3.0 L GAS
- Mighty Max | 1991-1996 | 1 Ton, Base | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Montero | 1992-1996 | Base, LS, RS, SR | 6 Cyl 3.0 L GAS
- Montero Sport | 1997-2003 | ES, LS, XLS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View More
View related parts
Mitsubishi Air Filter Part Number: 1500A672
$28.22 MSRP: $36.75
You Save: $8.53 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Element, Air Cleaner, DRY; Engine Air Filter
Fits the following Mitsubishi Models:
- Eclipse Cross | 2022-2025, 2018-2020 | Black Edition, ES, LE, Ralliart, SE, SE Special Edition, SEL, SEL Special Edition, SEL Touring, SP | 4 Cyl 1.5 L GAS
View related parts
Mitsubishi Element Part Number: 1500A086
$29.57 MSRP: $38.50
You Save: $8.93 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Element, Air Cleaner, NON; Air Filter Insert; Engine Air Filter; Air Filter
Fits the following Mitsubishi Models:
- Lancer | 2009-2015 | Ralliart, Ralliart Sportback | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Air Filter Part Number: 1500A831
$32.08 MSRP: $42.10
You Save: $10.02 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Element, Air Cleaner
Fits the following Mitsubishi Models:
- Outlander PHEV | 2022-2025 | ES, GT, LE, Platinum Edition, Ralliart, SE, SE Tech, SEL, SEL Premium, SEL Touring | 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Mitsubishi Air Filter Part Number: AX000036
$44.35 MSRP: $58.20
You Save: $13.85 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Element, Air Cleaner
Fits the following Mitsubishi Models:
- Outlander | 2022-2025 | Black Edition, ES, SE, SE Launch Edition, SEL, SEL Launch Edition | 4 Cyl 2.5 L GAS
View related parts
Mitsubishi Air Filter Part Number: MZ690197
$18.48 MSRP: $24.07
You Save: $5.59 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Element, Air Cleaner VS; Element
Fits the following Mitsubishi Models:
- Diamante | 1997-2004 | Base, ES, LS, VR-X | 6 Cyl 3.5 L GAS
View related parts
Mitsubishi Air Filter Part Number: 16546W010P
$21.49 MSRP: $27.98
You Save: $6.49 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Element, Air Cleaner, NON
Fits the following Mitsubishi Models:
- Outlander PHEV | 2018-2022 | GT, LE, SEL | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Mitsubishi Air Filter Part Number: MZ690193
Product Specifications
- Other Name: Element, Air Cleaner VS; Engine Air Filter; Element
Fits the following Mitsubishi Models:
- Lancer | 2002-2007 | ES, Evolution, Evolution MR, Evolution RS, Evolution SE, LS, OZ Rally, Ralliart, SE, Sportback, Sportback Ralliart | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Mirage | 1997-2002 | DE, ES, LS | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L GAS
- Outlander | 2003-2006 | LS, Limited, SE, XLS | 4 Cyl 2.4 L GAS
View More

Mitsubishi Air Filter

Mitsubishi Air Filter's every combustion engine in the lineup is protected from dust and grit while letting in plenty of clean oxygen for strong power and steady fuel economy. The Mitsubishi legacy evidences its incredible known capability in practical innovation. From the Model A to today's practical MIVEC powertrains that extract more energy from every drop of fuel, and the Super All Wheel Control grip is sure-footed on gravel, rain, and snow. The brand trials plug-in hybrids, conducts fuel cell research, and smart safety sensor experiments. Above all, it always aims to simplify tech for normal families. Mitsubishi's commitment to comfort and convenience is evident in features such as a touchscreen smartphone link, cruise control for easy driving on the highway, and cabin design to maximize visibility. Even as the vehicles continue to evolve, the Air Filter remains a silent hero. Employing a multilayered media sheet fixed in a sealed air box, this Air Filter prevents particles as small as five microns from entering the intake path and causing damage to pistons, valves, and sensors. A generous surface area enhances airflow, making acceleration feel very responsive. Plus, as dirt gradually accumulates, a quick swap restores it to normal breathing. Because each gasoline engine takes in nearly ten thousand gallons of air per gallon of fuel, a new filter is essential for maintaining performance, lowering emissions, and keeping service simple for years.

Pick genuine OEM Air Filter if you want superb performance and durability that lasts. Mitsubishi builds that using high-grade materials and official factory techniques to meet very strict standards. This means you get parts you can actually trust for your daily drive. Finding the right parts is simple in the massive stock of genuine inventory. You can stop guessing if a part will fit or hold up. You will love the low prices, dependable service and the real manufacturer's warranty on Mitsubishi Air Filter. Order today and the store will ship your brand-new items to your door as fast as possible.

Mitsubishi Air Filter Parts Questions & Experts Answers

Air Filter
MZ690193
Q: How to remove and install the Air Filter on Mitsubishi Lancer?
A:
For removing and installing the Air Filter, release the retaining clips separating rear housing from front cover and slide the element out. Detach the PCV hose from the air inlet hose and, if applicable, detach the wiring from the air flow sensor. Loosen clamps on the air inlet hose, which connects to the throttle body and rear housing (models other than 2.4 litres). Remove the air intake hose (and resonator, if necessary). Move the rear housing down and away from the front cover to release it and pull the rear housing out. Remove the bolts securing the front cover to the vehicle body, lifting the air intake out of the inner guard. Remove the two scrivets from the air intake at the front cover, loosen the clamps on the air inlet hos, and similarly disengage and remove the rear housing and front cover, for 2.4 litre models. Cleaning all parts other than the element and air flow sensor with a damp cloth. Check for splits or other damage in the rear housing, front cover and intake hose and that these do seal properly around the Air Filter. To install, reverse the removal steps. Ensure the housing retaining bolts are securely tightened. Also ensure that the element is fully seated, the air flow sensor wiring is plugged in, and all hose clamps are securely tightened.
Air Filter
MZ690194
Q: How should the air filter be replaced and maintained on Mitsubishi Montero?
A:
You should replace the air filter with a new one at specified intervals, and periodic inspections should occur as part of a preventive maintenance program, particularly when the car is constantly driven on dusty roads. The air filter sits in the air cleaner housing attached at the top of the carburetor on conventional models and at the right front corner of the engine compartment on fuel-injected models. In carbureted models, first, unclamp the clips, and then release the wing nut, which will allow you to lift the top plate from the air cleaner housing. After that, take out the air filter from the housing; replace it if it is dirty. Using a rag, wipe the inside of the air cleaner housing and replace the top plate. If the old filter is in acceptable condition, put it back into the housing. If it is not in good condition, place a new filter in the housing. Tighten the wing nut and snap the clips into place. For fuel injected models with round filter housing remove intake air hose, unclip, and pull out air flow sensor from housing. Take out the old filter element (do not touch the air flow sensor, when present), and replace it if dirty. Install the new filter element aligning the tabs to the air flow sensor body and install the clips. Lastly, attach the air intake hose, making sure there are no air leaks. Remove the clips on the rectangular filter housing, pull the cover up, and lift the filter. If it's dirty, replace it. Wipe the inside of a housing, put the old or new filter inside, place the cover back on, and put on the clips.