What are the key considerations for inspecting and maintaining Brake Line and Fuel Hose rubber and plastic components in engine and emission systems on Mitsubishi Galant?

High temperatures under the hood can cause rubber and plastic hoses used in engine, accessory and emission systems to crack and leak. Hoses should be inspected regularly for cracks and loose clamps, as well as material hardening and leaks. Check the cooling system hoses in particular. Ensure that the tension of any clamps securing hoses to fittings is sufficient to prevent leaks. Ensure that hoses which do not have clamps have not expanded or hardened. Vacuum hoses in the emissions system are generally marked with a specific color or colored stripes. When replacing these hoses, it is critical to be sure that the replacement hose is the same material as the original hose. The best way to check a hose is to remove it altogether, labeling each of the hoses and its attachment points, so that you can replace it back properly. You should examine plastic T-fittings for cracks. A hose fitting should also be examined for enlargement that can lead to leakage. Using a small piece of vacuum hose to detect vacuum leaks is quite simple. You can listen for hissing air sounds. All rubber fuel hoses should be thoroughly inspected for damage, especially at bends or where the hose is clamped. Any damaged hoses should be replaced with high-quality fuel line made for fuel injection systems. Hoses connecting calipers or wheel cylinders to metal lines are subject to high hydraulic pressures and temperatures while allowing flexibility. Brake hoses can usually be checked without removing wheels. Leaks, cracks, bulging, or other damage indicates a need for replacement. Metal lines are commonly employed for fuel transportation between the fuel tank and injection system, thus checks for bends, crimps, or cracks are essential. To replace a metal fuel line, seamless steel tubing is needed because copper and aluminum do not have the strength to survive engine vibrations. Furthermore, the metal brake lines must be checked where they enter the master cylinder and most brake proportioning or ABS unit for cracks or loose fittings. If there is any brake fluid leakage found, the brake system should be further inspected.

What precautions should be taken when replacing fuel hoses and components in a fuel injection system on Mitsubishi Montero?

Because the fuel injection system contains high pressure, it is always advisable to replace all newly released or removed clips with new. Regularly inspect rubber fuel hoses and metallic fuel lines for soil cracks, bends, deformation, deterioration, or clogging. Take out the air cleaner assembly; then, relieve fuel system pressure on fuel-injected engines. Unclamp the negative cable of the battery. Then, loosen the hose clamps/bolts. Use a cloth to wrap around the ends of the hose, so that residual fuel will be soaked up. After that, remove the hose. When replacing any hoses, make sure to use original equipment-type replacement hose and new hose clamps or O-rings. The pressure hoses used for the fuel injection system are specially designed to handle high pressures. After connecting the negative battery cable, start up the engine and check for leaks before reinstalling the air cleaner assembly. The vapor separator on carbureted models is a small canister mounted high on the left front fenderwell. It is located in the fuel system between the fuel pump and the carburetor to prevent vapor lock from high underhood temperatures. The fuel pump's main line connects to the middle fitting (to the carburetor accelerator pump housing). The hose to the bottom fitting leads to the carburetor fuel inlet. Hoses and fittings with corresponding colors help minimize the risk of incorrect hose installation on a carburetor. It should be replaced with a new one if the vapor separator is damaged or is leaking. Install the new one ensuring that the red fitting is at the top.

Genuine Mitsubishi Fuel Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

43 Fuel Hoses found

View related parts
Mitsubishi Filler Hose Part Number: MR503902
$44.00 MSRP: $61.13
You Save: $17.13 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Filler; Fuel Filler Hose; Fuel Hose
Fits the following Mitsubishi Models:
- Lancer | 2002-2007 | ES, LS, OZ Rally, Ralliart, SE, Sportback, Sportback Ralliart | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Filler Hose Part Number: 1710A155
$45.11 MSRP: $62.65
You Save: $17.54 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Filler; Fuel Filler Hose; Fuel Hose
Fits the following Mitsubishi Models:
- Outlander | 2007-2017 | ES, GT, LS, SE, SEL, XLS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander Sport | 2016-2018, 2011-2012 | ES, GT, LE, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Breather Tube Part Number: 17525W240P
$47.46 MSRP: $65.92
You Save: $18.46 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Filler Neck B; Fuel Filler Hose; Fuel Hose; Filler Tube
Fits the following Mitsubishi Models:
- Eclipse Cross | 2022-2025, 2018-2020 | Black Edition, ES, LE, Ralliart, SE, SE Special Edition, SEL, SEL Special Edition, SEL Touring, SP | 4 Cyl 1.5 L GAS
- Outlander | 2018-2020 | ES, GT, LE, SE, SEL, SP | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander Sport | 2017-2025 | BE, ES, GT, GT Special Edition, LE, Ralliart, S, SE, SE Special Edition, SEL, SP, Trail Edition | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View More
View related parts
Mitsubishi Filler Hose Part Number: 1710A520
$51.00 MSRP: $70.84
You Save: $19.84 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Filler; Fuel Filler Hose; Fuel Hose
Fits the following Mitsubishi Models:
- Mirage | 2017-2018 | ES, GT, SE | 3 Cyl 1.2 L GAS
View related parts
Mitsubishi Filler Hose Part Number: 1710B007
$55.09 MSRP: $76.52
You Save: $21.43 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Filler; Fuel Filler Hose; Fuel Hose
Fits the following Mitsubishi Models:
- Outlander | 2022-2025 | Black Edition, ES, SE, SE Launch Edition, SEL, SEL Launch Edition | 4 Cyl 2.5 L GAS
View related parts
Mitsubishi Filler Hose Part Number: MR978034
$55.27 MSRP: $76.77
You Save: $21.50 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Filler; Fuel Filler Hose; Fuel Hose
Fits the following Mitsubishi Models:
- Outlander | 2003-2006 | LS, Limited, SE, XLS | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Filler Hose Part Number: 1710A194
$55.27 MSRP: $76.76
You Save: $21.49 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Filler; Fuel Filler Hose; Fuel Hose
Fits the following Mitsubishi Models:
- Outlander Sport | 2011 | ES, SE | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Filler Hose Part Number: 1710A054
$58.45 MSRP: $81.18
You Save: $22.73 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Filler; Fuel Filler Hose; Fuel Hose
Fits the following Mitsubishi Models:
- Lancer | 2008-2017 | DE, ES, ES Sportback, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Filler Hose Part Number: MR959820
$83.16 MSRP: $115.50
You Save: $32.34 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Filler; Fuel Filler Hose; Fuel Hose
Fits the following Mitsubishi Models:
- Montero | 2002-2006 | Limited, XLS | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Filler Hose Part Number: MR573911
$84.89 MSRP: $117.90
You Save: $33.01 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Filler; Fuel Filler Hose; Fuel Hose
Fits the following Mitsubishi Models:
- Montero | 2001 | Limited, XLS | 6 Cyl 3.5 L GAS
View related parts
Mitsubishi Connector Hose Part Number: 1715A363
$100.18 MSRP: $139.13
You Save: $38.95 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Tank; Fuel Hose
Fits the following Mitsubishi Models:
- Mirage | 2019-2024 | BE, Black Edition, Carbonite Edition, ES, GT, LE, RF, SE | 3 Cyl 1.2 L GAS
View related parts
Mitsubishi Filler Hose Part Number: 1710A842
$109.33 MSRP: $151.85
You Save: $42.52 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Filler; Fuel Filler Hose; Fuel Hose
Fits the following Mitsubishi Models:
- Eclipse Cross | 2022-2025, 2018-2020 | Black Edition, ES, LE, Ralliart, SE, SE Special Edition, SEL, SEL Special Edition, SEL Touring, SP | 4 Cyl 1.5 L GAS
- Outlander | 2018-2020 | ES, GT, LE, SE, SEL, SP | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander Sport | 2018-2025 | BE, ES, GT, GT Special Edition, LE, Ralliart, S, SE, SE Special Edition, SEL, SP, Trail Edition | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View More
View related parts
Mitsubishi Connector Hose Part Number: 1715A364
$116.58 MSRP: $161.92
You Save: $45.34 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Tank; Fuel Hose
Fits the following Mitsubishi Models:
- Mirage G4 | 2019-2024 | BE, Carbonite Edition, ES, LE, RF, SE | 3 Cyl 1.2 L GAS
View related parts
Mitsubishi Filler Hose Part Number: 1710A558
$119.41 MSRP: $165.85
You Save: $46.44 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Filler; Fuel Filler Hose; Fuel Hose
Fits the following Mitsubishi Models:
- Mirage | 2019-2024 | BE, Black Edition, Carbonite Edition, ES, GT, LE, RF, SE | 3 Cyl 1.2 L GAS
View related parts
Mitsubishi Vent Hose Part Number: 1742A485
$49.73 MSRP: $69.06
You Save: $19.33 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Filler Neck B; Fuel Hose
Fits the following Mitsubishi Models:
- Mirage | 2019-2024 | BE, Black Edition, Carbonite Edition, ES, GT, LE, RF, SE | 3 Cyl 1.2 L GAS
- Mirage G4 | 2019-2024 | BE, Carbonite Edition, ES, LE, RF, SE | 3 Cyl 1.2 L GAS
View related parts
Mitsubishi Filler Tube Part Number: 1715A241
$95.15 MSRP: $132.14
You Save: $36.99 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube, Fuel Filler Leveli; Fuel Filler Hose; Fuel Hose
Fits the following Mitsubishi Models:
- Outlander PHEV | 2018-2022 | GT, LE, SEL | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Mitsubishi Filler Hose Part Number: 1710A559
$147.90 MSRP: $200.40
You Save: $52.50 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Filler; Fuel Filler Hose; Fuel Hose
Fits the following Mitsubishi Models:
- Mirage G4 | 2019-2024 | BE, Carbonite Edition, ES, LE, RF, SE | 3 Cyl 1.2 L GAS
View related parts
Mitsubishi Breather Tube Part Number: MR959550
$1.42 MSRP: $1.85
You Save: $0.43 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Filler Neck B; Fuel Hose; Vent Hose
Fits the following Mitsubishi Models:
- Eclipse | 2006-2012 | GS, GS Sport, GT, SE, Spyder GS, Spyder GS Sport, Spyder GT, Spyder SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
- Endeavor | 2010-2011, 2004-2008 | LS, Limited, SE, XLS | 6 Cyl 3.8 L GAS
- Galant | 2004-2012 | DE, ES, FE, GTS, LS, Ralliart, SE, Sport Edition, Sport V6 | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
View More
View related parts
Mitsubishi Vapor Hose Part Number: MN120141
$3.01 MSRP: $3.92
You Save: $0.91 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Filler Neck B; Fuel Hose
Fits the following Mitsubishi Models:
- Outlander | 2007-2008 | ES, LS, SE, XLS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mitsubishi Hose Part Number: MF661023
$3.19 MSRP: $4.15
You Save: $0.96 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Clamp, Fuel Filler Pipe; Fuel Hose
Fits the following Mitsubishi Models:
- Eclipse | 1995-1997 | Base, GS, GST, GSX, RS, Spyder GS, Spyder GST | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

| Page 1 of 3 |Next >

1-20 of 43 Results

Mitsubishi Fuel Hose

Fuel Hose is a crucial automotive component as it transports the fuel from the tank to the engine. This ensures that the vehicle has a steady supply of fuel and helps protect the powertrain from damaging leaks. Mitsubishi as a brand has evolved from its first Model A to today's smart vehicles, and it continues to place emphasis on simple operation. Its advanced MIVEC engines and Super All Wheel Control grip loose roads with confidence, while cruise control and smartphone link ensure your regular journey is easygoing. The company trials plug-in hybrids and fuel cells in cars, proving to be one that pushes tech that helps real-life drivers, not just a number. Mitsubishi is serious about making a quality product. There would be a careful choice of materials for every component. With this, Mitsubishi owners can be confident that their cars can work in many climates as well as on long drives. In keeping with this philosophy, the Fuel Hose uses special rubber or a metal braid that better resists heat and vibration and the chemical bite of modern gasoline than ordinary tubing. It remains supple enough to maneuver through cramped engine bays but strong enough to hold high-pressure gas, maintaining a sealed pathway that stabilizes combustion and limits emissions. To detect any signs of wear early on, drivers should regularly check the Fuel Hose for cracks or soft areas. Making the switch to a proper Fuel Hose will restore that smooth starting and response to throttle without having to take on any complicated modifications. With its technology and features helpful to the driver, the brand builds vehicles that are fun to drive.

Pick genuine OEM Fuel Hose if you want superb performance and durability that lasts. Mitsubishi builds that using high-grade materials and official factory techniques to meet very strict standards. This means you get parts you can actually trust for your daily drive. Finding the right parts is simple in the massive stock of genuine inventory. You can stop guessing if a part will fit or hold up. You will love the low prices, dependable service and the real manufacturer's warranty on Mitsubishi Fuel Hose. Order today and the store will ship your brand-new items to your door as fast as possible.

Mitsubishi Fuel Hose Parts Questions & Experts Answers

Connector Hose
MR271412
Q: What are the key considerations for inspecting and maintaining Brake Line and Fuel Hose rubber and plastic components in engine and emission systems on Mitsubishi Galant?
A:
High temperatures under the hood can cause rubber and plastic hoses used in engine, accessory and emission systems to crack and leak. Hoses should be inspected regularly for cracks and loose clamps, as well as material hardening and leaks. Check the cooling system hoses in particular. Ensure that the tension of any clamps securing hoses to fittings is sufficient to prevent leaks. Ensure that hoses which do not have clamps have not expanded or hardened. Vacuum hoses in the emissions system are generally marked with a specific color or colored stripes. When replacing these hoses, it is critical to be sure that the replacement hose is the same material as the original hose. The best way to check a hose is to remove it altogether, labeling each of the hoses and its attachment points, so that you can replace it back properly. You should examine plastic T-fittings for cracks. A hose fitting should also be examined for enlargement that can lead to leakage. Using a small piece of vacuum hose to detect vacuum leaks is quite simple. You can listen for hissing air sounds. All rubber fuel hoses should be thoroughly inspected for damage, especially at bends or where the hose is clamped. Any damaged hoses should be replaced with high-quality fuel line made for fuel injection systems. Hoses connecting calipers or wheel cylinders to metal lines are subject to high hydraulic pressures and temperatures while allowing flexibility. Brake hoses can usually be checked without removing wheels. Leaks, cracks, bulging, or other damage indicates a need for replacement. Metal lines are commonly employed for fuel transportation between the fuel tank and injection system, thus checks for bends, crimps, or cracks are essential. To replace a metal fuel line, seamless steel tubing is needed because copper and aluminum do not have the strength to survive engine vibrations. Furthermore, the metal brake lines must be checked where they enter the master cylinder and most brake proportioning or ABS unit for cracks or loose fittings. If there is any brake fluid leakage found, the brake system should be further inspected.
Hose
MB678699
Q: What precautions should be taken when replacing fuel hoses and components in a fuel injection system on Mitsubishi Montero?
A:
Because the fuel injection system contains high pressure, it is always advisable to replace all newly released or removed clips with new. Regularly inspect rubber fuel hoses and metallic fuel lines for soil cracks, bends, deformation, deterioration, or clogging. Take out the air cleaner assembly; then, relieve fuel system pressure on fuel-injected engines. Unclamp the negative cable of the battery. Then, loosen the hose clamps/bolts. Use a cloth to wrap around the ends of the hose, so that residual fuel will be soaked up. After that, remove the hose. When replacing any hoses, make sure to use original equipment-type replacement hose and new hose clamps or O-rings. The pressure hoses used for the fuel injection system are specially designed to handle high pressures. After connecting the negative battery cable, start up the engine and check for leaks before reinstalling the air cleaner assembly. The vapor separator on carbureted models is a small canister mounted high on the left front fenderwell. It is located in the fuel system between the fuel pump and the carburetor to prevent vapor lock from high underhood temperatures. The fuel pump's main line connects to the middle fitting (to the carburetor accelerator pump housing). The hose to the bottom fitting leads to the carburetor fuel inlet. Hoses and fittings with corresponding colors help minimize the risk of incorrect hose installation on a carburetor. It should be replaced with a new one if the vapor separator is damaged or is leaking. Install the new one ensuring that the red fitting is at the top.