How to renew bushes on a front Sway Bars on Mitsubishi Lancer?

To renew bushes, begin by raising the front of the vehicle and securely supporting it on jack stands, then remove the front wheels. Next, take off the Sway Bars link nut and bolt from both sides, along with all washers, bushes, and the spacer tube, noting the order for reassembly. For the Sway Bars bracket bushes, remove the bolts holding each control arm rear pivot bush bracket to the crossmember, then lower the control arms and use wire to hold them in place to avoid damaging the ball joints. After that, remove the crossmember, and if the manufacturer's paint marks are absent, mark the installed position of the bushes relative to the Sway Bars. Remove the Sway Bars bracket bolts and the brackets, then take out the bushes from the Sway Bars. During installation, ensure the Sway Bars mounting bushes are positioned according to the noted paint marks, install the Sway Bars brackets, and tighten the retaining bolts to the specified torque. Reinstall the crossmember, push the inner ends of the control arms back into position, tighten the rear pivot bush bracket bolts to the specified torque, and loosely install the front pivot bolt. Reassemble the Sway Bars link components in the order noted during removal and install the retaining nut, tightening it until the threaded section of the Sway Bars bolt protrudes 22 mm. Finally, install the front wheels, lower the vehicle to the ground, bounce the front of the vehicle several times to stabilise the suspension and settle the bushes, then hold the front pivot bolt and tighten the nut to the specified torque with the vehicle's weight resting on the suspension.

Genuine Mitsubishi Sway Bars

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

31 Sway Bars found

View related parts
Mitsubishi Stabilizer Bar Part Number: 56230W030P
$242.51 MSRP: $342.54
You Save: $100.03 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Rear Suspension Stabilizer; Sway Bars
Fits the following Mitsubishi Models:
- Outlander | 2022-2025 | Black Edition, ES, SE, SE Launch Edition, SEL, SEL Launch Edition | 4 Cyl 2.5 L GAS
View related parts
Mitsubishi Stabilizer Bar Part Number: MR554501
$248.13 MSRP: $350.47
You Save: $102.34 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Front Suspension Stabilizer; Sway Bars
Fits the following Mitsubishi Models:
- Lancer | 2003-2006 | Evolution, Evolution MR, Evolution RS, Evolution SE | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Stabilizer Bar Part Number: 54610W010P
$289.11 MSRP: $408.35
You Save: $119.24 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Front Suspension Stabilizer; Sway Bars
Fits the following Mitsubishi Models:
- Outlander | 2022-2024 | Black Edition, ES, SE, SE Launch Edition, SEL, SEL Launch Edition | 4 Cyl 2.5 L GAS
View related parts
Mitsubishi Stabilizer Bar Part Number: 4156A090
$91.66 MSRP: $127.30
You Save: $35.64 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Rear Suspension Stabilizer; Sway Bars
Fits the following Mitsubishi Models:
- Outlander Sport | 2013-2016 | ES, GT, LE, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Stabilizer Bar Part Number: 4156A065
$153.85 MSRP: $208.47
You Save: $54.62 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Rear Suspension Stabilizer; Sway Bars
Fits the following Mitsubishi Models:
- Lancer | 2012-2017 | DE, ES, ES Sportback, GT, GT Sportback, Ralliart, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Stabilizer Bar Part Number: MN101505
$156.10 MSRP: $211.52
You Save: $55.42 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Rear Suspension Stabilizer; Sway Bars
Fits the following Mitsubishi Models:
- Lancer | 2008-2011 | GTS, GTS Sportback, Ralliart, Ralliart Sportback | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Outlander | 2008-2013 | ES, SE | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Stabilizer Bar Part Number: MR519878
$156.62 MSRP: $212.22
You Save: $55.60 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Front Suspension Stabilizer; Sway Bars
Fits the following Mitsubishi Models:
- Lancer | 2002-2007 | ES, LS, OZ Rally, SE | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Stabilizer Bar Part Number: 56230W040P
$160.90 MSRP: $218.02
You Save: $57.12 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Rear Suspension Stabilizer; Sway Bars
Fits the following Mitsubishi Models:
- Outlander PHEV | 2023-2025 | ES, Platinum Edition, Ralliart, SE, SE Tech, SEL, SEL Premium, SEL Touring | 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Mitsubishi Stabilizer Bar Part Number: MN101507
$165.72 MSRP: $224.55
You Save: $58.83 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Rear Suspension Stabilizer; Sway Bars
Fits the following Mitsubishi Models:
- Lancer | 2009-2015 | DE, ES, ES Sportback, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Outlander | 2008-2013 | ES, SE | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Stabilizer Bar Part Number: MN101581
$173.16 MSRP: $234.63
You Save: $61.47 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Front Suspension Stabilizer; Sway Bars
Fits the following Mitsubishi Models:
- Lancer | 2004-2006 | Ralliart, Sportback, Sportback Ralliart | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Stabilizer Bar Part Number: 4156A012
$177.64 MSRP: $240.70
You Save: $63.06 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Rear Suspension Stabilizer; Sway Bars
Fits the following Mitsubishi Models:
- Outlander | 2007-2013 | ES, GT, LS, SE, XLS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mitsubishi Stabilizer Bar Part Number: 4156A202
$177.87 MSRP: $241.01
You Save: $63.14 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Rear Suspension Stabilizer; Sway Bars
Fits the following Mitsubishi Models:
- Eclipse Cross | 2022-2025 | Black Edition, ES, LE, Ralliart, SE, SE Special Edition, SEL, SEL Special Edition, SEL Touring | 4 Cyl 1.5 L GAS
View related parts
Mitsubishi Stabilizer Bar Part Number: 4156A011
$181.19 MSRP: $245.52
You Save: $64.33 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Rear Suspension Stabilizer; Sway Bars
Fits the following Mitsubishi Models:
- Outlander | 2007-2013 | ES, GT, LS, SE, XLS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mitsubishi Stabilizer Bar Part Number: MN100252
$183.66 MSRP: $248.87
You Save: $65.21 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Front Suspension Stabilizer; Sway Bars
Fits the following Mitsubishi Models:
- Outlander | 2003-2006 | LS, Limited, SE, XLS | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Stabilizer Bar Part Number: 4156A068
$184.80 MSRP: $250.39
You Save: $65.59 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Rear Suspension Stabilizer; Sway Bars
Fits the following Mitsubishi Models:
- Eclipse Cross | 2018-2020 | ES, LE, SE, SEL, SP | 4 Cyl 1.5 L GAS
View related parts
Mitsubishi Stabilizer Bar Part Number: 4156A093
$198.84 MSRP: $269.42
You Save: $70.58 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Rear Suspension Stabilizer; Sway Bars
Fits the following Mitsubishi Models:
- Outlander Sport | 2016-2025 | BE, ES, GT, GT Special Edition, LE, Ralliart, S, SE, SE Special Edition, SEL, SP, Trail Edition | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Stabilizer Bar Part Number: 4156A029
$200.00 MSRP: $271.01
You Save: $71.01 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Rear Suspension Stabilizer; Sway Bars
Fits the following Mitsubishi Models:
- Lancer | 2010-2015, 2008 | Evolution Final Edition, Evolution GSR, Evolution MR, Evolution MR Touring, Evolution SE | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Stabilizer Bar Part Number: MN184175
Product Specifications
- Other Name: Bar, Front Suspension Stabilizer; Sway Bars
Fits the following Mitsubishi Models:
- Galant | 2004-2006 | GTS | 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Stabilizer Bar Part Number: MN101360
Product Specifications
- Other Name: Bar, Rear Suspension Stabilizer; Sway Bars
Fits the following Mitsubishi Models:
- Lancer | 2012-2017 | ES, GT, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Outlander Sport | 2011-2012 | ES, SE | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Stabilizer Bar Part Number: MN101359
Product Specifications
- Other Name: Bar, Rear Suspension Stabilizer; Sway Bars
Fits the following Mitsubishi Models:
- Lancer | 2008-2017 | DE, ES, ES Sportback, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Outlander Sport | 2011-2012 | ES, SE | 4 Cyl 2.0 L GAS

| Page 1 of 2 |Next >

1-20 of 31 Results

Mitsubishi Sway Bars

Mitsubishi Sway Bars reduce body roll so every ride feels planted and confident. This lets drivers steer through corners with sharper feedback and better grip. Mitsubishi, established in 1870 as a shipping company, has developed over the years to become a worldwide automaker famous for its reliable and smartly designed cars and technology that balances efficiency and performance. The range features MIVEC engines that perform without restriction at any speed, Super All Wheel Control to maintain traction on gravel or snow, and a simple cruise and smartphone connection for everyday use. The company is also experimenting with a fuel cell power and advanced safety sensor. At the same time, operation is easy for newer drivers and enthusiasts. Thus, Mitsubishi always looks ahead without ignoring the basics. Sway Bars are another key partner in that stable experience. They run across the width of the vehicle to link left and right suspension arms. Essentially a rigid metal rod, it twists against torque. This pushes the inside wheel down when the outside wheel lifts. The result is limited lean and consistent contact with the road surface. Machined bushings mount the bar to the chassis while end links connect with it. Newer stuff makes turns feel tighter and stops better. Periodic inspections for cracked bushings or loose joints allow Sway Bars to keep on doing their job. A quick replacement of worn links restores the perfect balance of comfort and precision engineered into every vehicle. These bars come in metal, durable instead of plastic, and are a cost-effective improvement that helps out the entire lineup.

Pick genuine OEM Sway Bars if you want superb performance and durability that lasts. Mitsubishi builds that using high-grade materials and official factory techniques to meet very strict standards. This means you get parts you can actually trust for your daily drive. Finding the right parts is simple in the massive stock of genuine inventory. You can stop guessing if a part will fit or hold up. You will love the low prices, dependable service and the real manufacturer's warranty on Mitsubishi Sway Bars. Order today and the store will ship your brand-new items to your door as fast as possible.

Mitsubishi Sway Bars Parts Questions & Experts Answers

Stabilizer Bar
MN101581
Q: How to renew bushes on a front Sway Bars on Mitsubishi Lancer?
A:
To renew bushes, begin by raising the front of the vehicle and securely supporting it on jack stands, then remove the front wheels. Next, take off the Sway Bars link nut and bolt from both sides, along with all washers, bushes, and the spacer tube, noting the order for reassembly. For the Sway Bars bracket bushes, remove the bolts holding each control arm rear pivot bush bracket to the crossmember, then lower the control arms and use wire to hold them in place to avoid damaging the ball joints. After that, remove the crossmember, and if the manufacturer's paint marks are absent, mark the installed position of the bushes relative to the Sway Bars. Remove the Sway Bars bracket bolts and the brackets, then take out the bushes from the Sway Bars. During installation, ensure the Sway Bars mounting bushes are positioned according to the noted paint marks, install the Sway Bars brackets, and tighten the retaining bolts to the specified torque. Reinstall the crossmember, push the inner ends of the control arms back into position, tighten the rear pivot bush bracket bolts to the specified torque, and loosely install the front pivot bolt. Reassemble the Sway Bars link components in the order noted during removal and install the retaining nut, tightening it until the threaded section of the Sway Bars bolt protrudes 22 mm. Finally, install the front wheels, lower the vehicle to the ground, bounce the front of the vehicle several times to stabilise the suspension and settle the bushes, then hold the front pivot bolt and tighten the nut to the specified torque with the vehicle's weight resting on the suspension.