How to remove and install the windscreen wiper blade, wiper arm, wiper motor, and wiper linkage on Mitsubishi Lancer?

To take the wiper blade out and put it back in the wiper arm you raise the windscreen wiper arm and blade away from the windscreen until it locks in the vertical position. After you press the clip at the center of the wiper blade and slide the blade off the hook on the end of the wiper arm. You reinstall the wiper blade is a reversal of this procedure ensuring the clip locks the blade securely. To renew the wiper blade rubber, first remove the wiper blade itself. Once this is done, grip the lower end of the rubber using pliers and pull these rubber tabs free from the claws of the metal blade. Continue this process until the rubber is completely removed. Following that, by observing the direction of the metal rail's bow, extract the metal rails from the old rubber and throw it away To install the new rubber, insert the metal rails in the side slots of the rubber according to the picture below, which shows the correct orientation (the bow must face outside/to the end). Now insert the rubber into the blade claws. Important: Do not disengage the metal rails, and make sure the tabs face the lower end of the wiper blade. Align the small slots at the end of the rubber blade with the metal claws of the wiper blade and mount the wiper blade on the wiper arm. To remove the wiper arm, Position the wipers in the Park position. Prise the plastic cover (if fitted) and remove the wiper arm retaining nut. Carefully prise the wiper arm from the wiper pivot shaft taking care not to damage the vehicle. In some cases, it may be necessary to lift the wiper arm from the windscreen and rock the wiper arm back and forth with the nut loose to separate the wiper arm from the pivot shaft. By using this method, leverage is not taken from the windscreen. Installation involves reversing the sequence so that with the wiper motor at Park position, the wiper blades shall be parallel to the windscreen weather strip and about 20 mm above it and shall not contact the windscreen surround during operation. To remove the wiper motor, first, disconnect the vehicle battery negative terminal and the wiring from the motor. Next, remove the retaining bolts and partially withdraw the motor from the firewall. With a flat-bladed screwdriver, separate the linkage from the motor, note that you will not removed the arm from the motor. The installation is the reverse of this process, ensuring the linkage is secure to the wiper motor arm; if you are not sure of the park position on installation it is best to remove the wiper arms, to prevent damage when the motor is first used, followed by ensuring the retaining bolts are safely tight and the wiring connector is secure. To remove and install the wiper linkage, first remove the wiper arms and motor, before raising the bonnet and prising the clips retaining the plenum cover, releasing the clips and withdrawing the cover. Remove the pivot shaft retaining nuts from the two sides of the vehicle and manoeuvre the wiper linkage from the vehicle. Installation is the same as the removal but ensure the pivot shaft retaining nuts are tightened before installing the wiper motor and the wiper motor wiring is securely connected.

How should windshield wiper blades be inspected and maintained on Mitsubishi Montero?

Windshield wiper blades should be checked periodically for damage, loose parts, and for cracked or worn rubber parts. Road film can build up on the blades so, therefore, it is good practice to regularly wash the blades with a mild detergent solution. The wiping mechanism can cause nuts and bolts to loosen so while inspecting the wiper blades nuts and bolts should be checked and tightened accordingly. If the blades are letting you down, it is best to replace them with new blades. To remove a wiper blade, press the release tab located at the center of the wiper arm and pull the blade off. Use needle nose pliers to pull the two support rods out and slide the element out of the wiper bridge after bending the element end out of the way. Once the element is removed, slide the new one into place and insert the rods to lock it. When putting the wiper blade on the arm, place the plastic clip on the arm and slide the blade over it until it locks in place.

Genuine Mitsubishi Wiper Blade

Windshield Wiper Blade

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

64 Wiper Blades found

View related parts
Mitsubishi Blade Assembly Insert, Passenger Side Part Number: MR971991
$5.72 MSRP: $7.45
You Save: $1.73 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade, Windshield Wiper; Windshield Wiper; Wiper Blade
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Galant | 2004-2012 | DE, ES, FE, GTS, LS, Ralliart, SE, Sport Edition, Sport V6 | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Wiper Blade Insert Part Number: MR339997
$8.36 MSRP: $10.88
You Save: $2.52 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade, Rear Window Wiper; Windshield Wiper; Wiper Blade; Wiper Insert; Insert
- Replaces: MR472983
Fits the following Mitsubishi Models:
- Endeavor | 2004-2007 | LS, Limited, SE, XLS | 6 Cyl 3.8 L GAS
- Lancer | 2010-2015 | ES Sportback, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Outlander | 2003-2006 | LS, Limited, SE, XLS | 4 Cyl 2.4 L GAS
View More
View related parts
Mitsubishi Wiper Insert Part Number: MR598099
$8.91 MSRP: $11.60
You Save: $2.69 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade, Rear Window Wiper; Windshield Wiper; Wiper Blade; Rear Blade
Fits the following Mitsubishi Models:
- Lancer | 2004 | ES, Evolution, LS, OZ Rally, Ralliart, Sportback, Sportback Ralliart | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Wiper Insert Part Number: MR598173
$9.01 MSRP: $11.74
You Save: $2.73 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade, Rear Window Wiper; Wiper Blade
Fits the following Mitsubishi Models:
- Outlander | 2007-2012 | ES, GT, LS, SE, XLS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mitsubishi Wiper Insert Part Number: 8253A095
$9.01 MSRP: $11.74
You Save: $2.73 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade, Rear Window Wiper; Windshield Wiper; Wiper Blade
Fits the following Mitsubishi Models:
- Outlander Sport | 2011-2020 | BE, ES, GT, LE, SE, SEL, SP | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Blade Assembly Refill Part Number: MR300006
$9.55 MSRP: $12.43
You Save: $2.88 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade, Windshield Wiper; Windshield Wiper; Wiper Blade; Wiper Blade Insert
Fits the following Mitsubishi Models:
- Mirage | 1997-2002 | DE, ES, LS | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L GAS
- Outlander | 2003-2006 | LS, Limited, SE, XLS | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Blade Assembly Insert Part Number: MR275300
$9.88 MSRP: $12.87
You Save: $2.99 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade, Windshield Wiper; Windshield Wiper; Wiper Blade; Wiper Insert
Fits the following Mitsubishi Models:
- Galant | 1999-2003 | DE, ES, GTZ, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Lancer | 2002-2017 | DE, ES, ES Sportback, Evolution, Evolution GSR, Evolution MR, Evolution MR Touring, Evolution RS, Evolution SE, GT, GT Sportback, GTS, GTS Sportback, LS, OZ Rally, Ralliart, Ralliart Sportback, SE, SEL, Sportback, Sportback Ralliart | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Wiper Blade Insert, Passenger Side Part Number: 8250A603
$10.07 MSRP: $13.12
You Save: $3.05 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade, Windshield Wiper; Windshield Wiper; Wiper Blade
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Outlander | 2014-2015 | ES, GT, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mitsubishi Wiper Insert Part Number: MR300303
$10.36 MSRP: $13.48
You Save: $3.12 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade, Windshield Wiper; Windshield Wiper; Wiper Blade; Blade Insert; Insert
Fits the following Mitsubishi Models:
- 3000GT | 1999 | Base, SL, VR-4 | 6 Cyl 3.0 L GAS
- Montero | 2001-2003 | Limited, XLS | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
- Montero Sport | 1997-2004 | ES, LS, Limited, XLS, XS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
View More
View related parts
Mitsubishi Wiper Blade Insert, Passenger Side Part Number: 8250A180
$10.57 MSRP: $13.77
You Save: $3.20 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade, Windshield Wiper; Windshield Wiper; Wiper Blade
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Outlander | 2011-2013 | ES, GT, SE, XLS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander Sport | 2011-2025 | BE, ES, GT, GT Special Edition, LE, Ralliart, S, SE, SE Special Edition, SEL, SP, Trail Edition | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Wiper Blade Insert, Passenger Side Part Number: MR339994
$10.87 MSRP: $14.16
You Save: $3.29 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade, Windshield, Rear Window; Windshield Wiper; Wiper Blade; Insert
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Mirage | 2017-2020, 2014-2015 | DE, ES, GT, LE, RF, SE | 3 Cyl 1.2 L GAS
- Mirage G4 | 2017-2020 | ES, LE, RF, SE | 3 Cyl 1.2 L GAS
- Montero | 2001-2006 | Limited, XLS | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
- Montero Sport | 2003 | ES, LS, Limited, XLS | 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
View More
View related parts
Mitsubishi Blade Assembly Refill Part Number: MB821509
$11.03 MSRP: $14.37
You Save: $3.34 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade, Windshield Wiper; Windshield Wiper; Wiper Blade; Blade Assembly; Blade Insert; Wiper Insert; Insert; Blade
Fits the following Mitsubishi Models:
- 3000GT | 1991-1998 | Base, SL, Spyder SL, Spyder VR-4, VR-4 | 6 Cyl 3.0 L GAS
- Diamante | 1992-1996 | ES, LS | 6 Cyl 3.0 L GAS
- Eclipse | 1990-1994 | Base, GS, GST, GSX | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
- Mirage | 1989-1996 | Base, ES, GS, LS, RS, S, SE, Turbo, VL | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
- Montero Sport | 1997-2004 | ES, LS, Limited, XLS, XS | 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
View More
View related parts
Mitsubishi Wiper Blade Part Number: MZ690152
$11.26 MSRP: $14.67
You Save: $3.41 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade Assembly, Rear Wiper, 325; Windshield Wiper; Blade
Fits the following Mitsubishi Models:
- Lancer | 2014-2015 | ES Sportback, GT, GT Sportback, Ralliart, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Mirage | 1989-1990 | Base, RS, Turbo, VL | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS
View related parts
Mitsubishi Wiper Blade Insert, Driver Side Part Number: 8250A179
$11.48 MSRP: $14.94
You Save: $3.46 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade, Windshield Wiper; Windshield Wiper; Wiper Blade; Insert
- Position: Driver Side
Fits the following Mitsubishi Models:
- Eclipse Cross | 2022-2025, 2018-2020 | Black Edition, ES, LE, Ralliart, SE, SE Special Edition, SEL, SEL Special Edition, SEL Touring, SP | 4 Cyl 1.5 L GAS
- Outlander | 2010-2013 | ES, GT, SE, XLS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander Sport | 2011-2025 | BE, ES, GT, GT Special Edition, LE, Ralliart, S, SE, SE Special Edition, SEL, SP, Trail Edition | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View More
View related parts
Mitsubishi Wiper Blade Insert Part Number: 8253A224
$11.58 MSRP: $15.09
You Save: $3.51 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade, Rear Window Wiper; Windshield Wiper; Wiper Blade; Wiper Insert; Insert
Fits the following Mitsubishi Models:
- Endeavor | 2010-2011, 2008 | LS, SE | 6 Cyl 3.8 L GAS
- Mirage | 2017-2024, 2014-2015 | BE, Black Edition, Carbonite Edition, DE, ES, GT, LE, RF, SE | 3 Cyl 1.2 L GAS
- Outlander | 2013-2020 | ES, GT, LE, SE, SEL, SP | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander PHEV | 2018-2022 | GT, LE, SEL | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View More
View related parts
Mitsubishi Wiper Blade Insert, Passenger Side Part Number: 288B5W020P
$11.65 MSRP: $15.16
You Save: $3.51 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade, Windshield Wiper; Windshield Wiper; Wiper Blade
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Mirage | 2021-2024 | BE, Black Edition, Carbonite Edition, ES, LE, SE | 3 Cyl 1.2 L GAS
- Mirage G4 | 2021-2024 | BE, Carbonite Edition, ES, LE, SE | 3 Cyl 1.2 L GAS
View related parts
Mitsubishi Wiper Blade Insert, Passenger Side Part Number: 8250B038
$11.81 MSRP: $15.38
You Save: $3.57 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade, Windshield Wiper; Windshield Wiper; Wiper Blade
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Outlander | 2016-2020 | ES, GT, LE, SE, SEL, SP | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander PHEV | 2018-2022 | GT, LE, SEL | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Mitsubishi Wiper Insert Part Number: 8253A253
$12.98 MSRP: $16.91
You Save: $3.93 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade, Rear Window Wiper; Windshield Wiper; Wiper Blade
Fits the following Mitsubishi Models:
- Eclipse Cross | 2018-2020 | ES, LE, SE, SEL, SP | 4 Cyl 1.5 L GAS
- Outlander Sport | 2021-2025 | BE, ES, GT, GT Special Edition, LE, Ralliart, S, SE, SE Special Edition, SEL, Trail Edition | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Wiper Insert, Driver Side Part Number: MR472596
$13.03 MSRP: $16.97
You Save: $3.94 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade, Windshield Wiper; Windshield Wiper; Wiper Blade
- Position: Driver Side
Fits the following Mitsubishi Models:
- Lancer | 2008-2017 | DE, ES, ES Sportback, Evolution GSR, Evolution MR, Evolution MR Touring, Evolution SE, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Wiper Blade Insert Part Number: MR574655
$13.20 MSRP: $17.18
You Save: $3.98 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade, Windshield Wiper; Windshield Wiper; Wiper Blade; Wiper Insert; Front Blade; Insert
- Replaces: 8250A099
Fits the following Mitsubishi Models:
- Eclipse | 2006-2012 | GS, GS Sport, GT, SE, Spyder GS, Spyder GS Sport, Spyder GT, Spyder SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
- Lancer | 2002-2007 | ES, Evolution, Evolution MR, Evolution RS, Evolution SE, LS, OZ Rally, Ralliart, SE, Sportback, Sportback Ralliart | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Mirage | 2017-2020, 2014-2015 | DE, ES, GT, LE, RF, SE | 3 Cyl 1.2 L GAS
- Mirage G4 | 2017-2020 | ES, LE, RF, SE | 3 Cyl 1.2 L GAS
- Outlander | 2007-2013 | ES, GT, LS, SE, XLS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View More

| Page 1 of 4 |Next >

1-20 of 64 Results

Mitsubishi Wiper Blade

Mitsubishi Wiper Blade clears water, snow and other debris from your windscreen so you maintain a bright, clear view during any storm. The company was founded in 1870 mainly to participate in shipping, but as their work progressed into autos, they introduced the very first Model A in 1917. It just kicked off the approach for constant pioneering of smart-sounding but simple driving assistance. The brand offers MIVEC engines that are fuel-efficient along with Super All Wheel Control that provides a confident grip on loose surfaces. Also, the convenient features of cruise control and smartphone link make your everyday travel a piece of cake whether you are a family or a commuter. Mitsubishi is also trying out plug-in hybrids and early safety sensors, constantly on the hunt for technology that keeps drivers relaxed, safe and in charge. The same emphasis on reliable performance dictates the design of components only to ensure simple maintenance and reliable quality. The Wiper Blade uses its flexible rubber edge and evenly distributed pressure spine to hug a curved windscreen without leaving streaks. It adapts to temperature change which ensures that it remains flexible in summer heat and winter frost. It sweeps in a rhythmic arc that can lift away water, dirt and grit before they can impair vision, while quick checks for cracks or roughness tell an owner when a simple replacement will restore factory-fresh clarity. With the installation of a new Mitsubishi Wiper Blade, sightlines become crisp again, further contributing to the Mitsubishi promise.

Pick genuine OEM Wiper Blade if you want superb performance and durability that lasts. Mitsubishi builds that using high-grade materials and official factory techniques to meet very strict standards. This means you get parts you can actually trust for your daily drive. Finding the right parts is simple in the massive stock of genuine inventory. You can stop guessing if a part will fit or hold up. You will love the low prices, dependable service and the real manufacturer's warranty on Mitsubishi Wiper Blade. Order today and the store will ship your brand-new items to your door as fast as possible.

Mitsubishi Wiper Blade Parts Questions & Experts Answers

Front Blade Black
8250A969
Q: How to remove and install the windscreen wiper blade, wiper arm, wiper motor, and wiper linkage on Mitsubishi Lancer?
A:
To take the wiper blade out and put it back in the wiper arm you raise the windscreen wiper arm and blade away from the windscreen until it locks in the vertical position. After you press the clip at the center of the wiper blade and slide the blade off the hook on the end of the wiper arm. You reinstall the wiper blade is a reversal of this procedure ensuring the clip locks the blade securely. To renew the wiper blade rubber, first remove the wiper blade itself. Once this is done, grip the lower end of the rubber using pliers and pull these rubber tabs free from the claws of the metal blade. Continue this process until the rubber is completely removed. Following that, by observing the direction of the metal rail's bow, extract the metal rails from the old rubber and throw it away To install the new rubber, insert the metal rails in the side slots of the rubber according to the picture below, which shows the correct orientation (the bow must face outside/to the end). Now insert the rubber into the blade claws. Important: Do not disengage the metal rails, and make sure the tabs face the lower end of the wiper blade. Align the small slots at the end of the rubber blade with the metal claws of the wiper blade and mount the wiper blade on the wiper arm. To remove the wiper arm, Position the wipers in the Park position. Prise the plastic cover (if fitted) and remove the wiper arm retaining nut. Carefully prise the wiper arm from the wiper pivot shaft taking care not to damage the vehicle. In some cases, it may be necessary to lift the wiper arm from the windscreen and rock the wiper arm back and forth with the nut loose to separate the wiper arm from the pivot shaft. By using this method, leverage is not taken from the windscreen. Installation involves reversing the sequence so that with the wiper motor at Park position, the wiper blades shall be parallel to the windscreen weather strip and about 20 mm above it and shall not contact the windscreen surround during operation. To remove the wiper motor, first, disconnect the vehicle battery negative terminal and the wiring from the motor. Next, remove the retaining bolts and partially withdraw the motor from the firewall. With a flat-bladed screwdriver, separate the linkage from the motor, note that you will not removed the arm from the motor. The installation is the reverse of this process, ensuring the linkage is secure to the wiper motor arm; if you are not sure of the park position on installation it is best to remove the wiper arms, to prevent damage when the motor is first used, followed by ensuring the retaining bolts are safely tight and the wiring connector is secure. To remove and install the wiper linkage, first remove the wiper arms and motor, before raising the bonnet and prising the clips retaining the plenum cover, releasing the clips and withdrawing the cover. Remove the pivot shaft retaining nuts from the two sides of the vehicle and manoeuvre the wiper linkage from the vehicle. Installation is the same as the removal but ensure the pivot shaft retaining nuts are tightened before installing the wiper motor and the wiper motor wiring is securely connected.
Blade Assembly
MZ690157
Q: How should windshield wiper blades be inspected and maintained on Mitsubishi Montero?
A:
Windshield wiper blades should be checked periodically for damage, loose parts, and for cracked or worn rubber parts. Road film can build up on the blades so, therefore, it is good practice to regularly wash the blades with a mild detergent solution. The wiping mechanism can cause nuts and bolts to loosen so while inspecting the wiper blades nuts and bolts should be checked and tightened accordingly. If the blades are letting you down, it is best to replace them with new blades. To remove a wiper blade, press the release tab located at the center of the wiper arm and pull the blade off. Use needle nose pliers to pull the two support rods out and slide the element out of the wiper bridge after bending the element end out of the way. Once the element is removed, slide the new one into place and insert the rods to lock it. When putting the wiper blade on the arm, place the plastic clip on the arm and slide the blade over it until it locks in place.