How to remove and install the speed sensors on Mitsubishi Diamante?

In Mirage speed sensor removal and installation, first, disconnect negative battery cable and wait at least 90 seconds before continuing. To begin with the front, lift the vehicle up, remove splash shield, disconnect speed sensor connector, remove clips that hold the harness of the sensor, and take speed sensor out of a bracket. To install, attach the speed sensor to the bracket with a mounting bolt and reinstall the clips. Connect the connector and reconnect the negative battery cable. To get to the rear, do the same steps as before. Unplug the speed sensor connector. Remove the clips and the mounting bolt from the speed sensor. To begin installation, the speed sensor should be loosely tightened. Reinstall the clips, adjust the sensor air gap to a specification of 0.012-0.035 inches, tighten the bracket followed by reconnecting the negative battery cable. When it comes to the Galant, the front process involves disconnecting the negative battery cable, lifting the vehicle, removing the tire and wheel assembly, fender splash shield, and ABS speed sensor connector, and then removing the sensor harness clamp bolts and the sensor. Ensure a clearance of 1.11 to 1.12 inch. Install the ABS speed sensor with its mounting bolt. Reinstall the harness, reconnect the connector. Reassemble the tire and wheel. The steps to disconnect and remove the sensor are the same as those of the front procedure. Subsequently, the two parts are reinstalled. Lastly, the battery cable is reconnected. For the Diamante, you first disconnect the negative terminal of the battery and wait for 90 seconds. Lift the vehicle and remove the splash shield. Detach the speed sensor connector. Then remove the clips and the sensor. Following a torque setting of 9 ft. lbs., rotate the speed sensor of the Torrid and reinstall the clips. Subsequently, connect the sensor and reconnect the battery cable. The rear module is similarly accomplished incorporating the unfastening of the cable band on AWD models, and installation with the exact torque specifications followed by re-connection of the harness and battery cable.

What is the purpose and function of the anti-lock brake system and what role does the Speed Sensor play on Mitsubishi Galant?

The fundamental purpose of the anti-lock brake system is to ensure steerability, directional stability and deceleration of optimum value to the vehicle during hard braking operations performed on severe road surfaces. The system continuously monitors the rotation speed of each wheel. It includes 3 main parts wheel speed sensors electronic control unit ECU hydraulic unit. The control unit receives variable voltage signals from each of the four wheel speed sensors. It monitors these signals to check whether any of the wheels are about to lock up. The hydraulic unit can then reduce the brake pressure via electrically operated solenoid valves. When there is problem with the ABS system, a warning light "ABS" will glow on the dashboard of the vehicle. Power loss is usually due to defective wiring harness. Most of the ABS wiring harnesses have undergone wear and tear due to chafing or damage. Therefore, visually check removable wiring harnesses close to wheel area. Preliminary checks for troubleshooting may include checking the level of the brake fluid, verifying secure electrical connections, checking fuses, and inspecting wiring harnesses. If you find that these inspections do not help, it is advised to get it checked by a technician. To remove or install the wheel speed sensor, you must first loosen the wheel lugs followed by raising and removing the wheel. With the ignition switched off, trace and disconnect the sensor wiring, disconnect the electrical connector, and remove the mounting bolt to take out the sensor. The process of reinstallation is in reverse order that creates the mounting bolt of the attachment to secures.

Genuine Mitsubishi Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

73 Speed Sensors found

View related parts
Mitsubishi Rear Speed Sensor, Passenger Side Part Number: 4670A580
$236.04 MSRP: $333.38
You Save: $97.34 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Rear ABS, Right-Hand; ABS Wheel Speed Sensor; Speed Sensor; ABS Sensor
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Lancer | 2008-2017 | DE, ES, ES Sportback, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Outlander | 2008-2013 | ES, SE | 4 Cyl 2.4 L GAS
- Outlander Sport | 2011-2013 | ES, LE, SE | 4 Cyl 2.0 L GAS
View More
View related parts
Mitsubishi ABS Sensor, Passenger Side Part Number: 4670A582
$237.69 MSRP: $335.72
You Save: $98.03 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Rear ABS, Right-Hand; ABS Wheel Speed Sensor; Speed Sensor; Rear Speed Sensor
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Lancer | 2012-2017 | ES, GT, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Outlander | 2008-2013 | ES, GT, SE, XLS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander Sport | 2011-2012 | ES, SE | 4 Cyl 2.0 L GAS
View More
View related parts
Mitsubishi ABS Sensor, Driver Side Part Number: 4670A581
$261.45 MSRP: $369.29
You Save: $107.84 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Rear ABS, Left-Hand; ABS Wheel Speed Sensor; Speed Sensor; Rear Speed Sensor
- Position: Driver Side
Fits the following Mitsubishi Models:
- Lancer | 2012-2017 | ES, GT, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Outlander | 2008-2013 | ES, GT, SE, XLS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander Sport | 2011-2013 | ES, LE, SE | 4 Cyl 2.0 L GAS
View More
View related parts
Mitsubishi Rear Speed Sensor, Driver Side Part Number: 4670A579
$267.05 MSRP: $377.19
You Save: $110.14 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Rear ABS, Left-Hand; ABS Wheel Speed Sensor; Speed Sensor; ABS Sensor
- Position: Driver Side
Fits the following Mitsubishi Models:
- Lancer | 2008-2017 | DE, ES, ES Sportback, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Outlander | 2008-2013 | ES, SE | 4 Cyl 2.4 L GAS
- Outlander Sport | 2011-2012 | ES, SE | 4 Cyl 2.0 L GAS
View More
View related parts
Mitsubishi Rear Speed Sensor, Passenger Side Part Number: 4670B416
$284.71 MSRP: $402.13
You Save: $117.42 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Rear ABS, Right-Hand; Speed Sensor; ABS Sensor
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Outlander Sport | 2013-2016 | ES, GT, LE, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Rear Speed Sensor, Passenger Side Part Number: 4670B320
$287.38 MSRP: $405.90
You Save: $118.52 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Rear ABS, Right-Hand; Speed Sensor; ABS Sensor
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Eclipse Cross | 2022-2025, 2018-2020 | Black Edition, ES, LE, Ralliart, SE, SE Special Edition, SEL, SEL Special Edition, SEL Touring, SP | 4 Cyl 1.5 L GAS
- Outlander | 2017-2020 | ES, GT, LE, SE, SEL, SP | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander PHEV | 2018-2022 | GT, LE, SEL | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View More
View related parts
Mitsubishi Front Speed Sensor, Driver Side Part Number: MR527311
$289.95 MSRP: $409.53
You Save: $119.58 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Front ABS, Left-Hand; ABS Wheel Speed Sensor; Speed Sensor; ABS Sensor
- Position: Driver Side
Fits the following Mitsubishi Models:
- Lancer | 2002-2007 | ES, LS, OZ Rally, Ralliart, SE, Sportback, Sportback Ralliart | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Rear Speed Sensor, Driver Side Part Number: 4670B319
$290.11 MSRP: $409.77
You Save: $119.66 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Rear ABS, Left-Hand; Speed Sensor; ABS Sensor
- Position: Driver Side
Fits the following Mitsubishi Models:
- Eclipse Cross | 2022-2025, 2018-2020 | Black Edition, ES, LE, Ralliart, SE, SE Special Edition, SEL, SEL Special Edition, SEL Touring, SP | 4 Cyl 1.5 L GAS
- Outlander | 2017-2020 | ES, GT, LE, SE, SEL, SP | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander PHEV | 2018-2022 | GT, LE, SEL | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
- Outlander Sport | 2017-2025 | BE, ES, GT, GT Special Edition, LE, Ralliart, S, SE, SE Special Edition, SEL, SP, Trail Edition | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View More
View related parts
Mitsubishi ABS Sensor, Driver Side Part Number: 4820A859
$290.54 MSRP: $410.38
You Save: $119.84 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Harness, Parking Brake, L; Speed Sensor; Rear Speed Sensor
- Position: Driver Side
Fits the following Mitsubishi Models:
- Outlander | 2022-2025 | Black Edition, ES, SE, SE Launch Edition, SEL, SEL Launch Edition | 4 Cyl 2.5 L GAS
View related parts
Mitsubishi ABS Sensor, Passenger Side Part Number: 4820A860
$315.24 MSRP: $445.25
You Save: $130.01 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Harness, Parking Brake, R; Speed Sensor; Rear Speed Sensor
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Outlander | 2022-2025 | Black Edition, ES, SE, SE Launch Edition, SEL, SEL Launch Edition | 4 Cyl 2.5 L GAS
View related parts
Mitsubishi Rear Speed Sensor, Driver Side Part Number: MR493455
$326.93 MSRP: $461.77
You Save: $134.84 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Rear ABS, Left-Hand; ABS Wheel Speed Sensor; Speed Sensor; ABS Sensor
- Position: Driver Side
Fits the following Mitsubishi Models:
- Lancer | 2003-2006 | Evolution, Evolution MR, Evolution RS, Evolution SE | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Rear Speed Sensor, Passenger Side Part Number: 4670B324
$355.97 MSRP: $502.78
You Save: $146.81 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Rear ABS, Right-Hand; Speed Sensor; ABS Sensor
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Outlander Sport | 2017-2022 | BE, ES, GT, GT Special Edition, LE, S, SE, SE Special Edition, SEL, SP | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Front Speed Sensor, Driver Side Part Number: MR569147
$359.63 MSRP: $507.95
You Save: $148.32 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Front ABS, Left-Hand; ABS Wheel Speed Sensor; Speed Sensor; ABS Sensor
- Position: Driver Side
Fits the following Mitsubishi Models:
- Lancer | 2003-2006 | Evolution, Evolution MR, Evolution RS, Evolution SE | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Front Speed Sensor, Passenger Side Part Number: MR569148
$362.28 MSRP: $511.70
You Save: $149.42 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Front ABS, Right-Hand; ABS Wheel Speed Sensor; Speed Sensor; ABS Sensor
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Lancer | 2003-2006 | Evolution, Evolution MR, Evolution RS, Evolution SE | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Rear Speed Sensor, Passenger Side Part Number: 4670B390
$365.66 MSRP: $516.47
You Save: $150.81 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Rear ABS, Right-Hand; Speed Sensor; ABS Sensor
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Outlander Sport | 2017-2025 | BE, ES, GT, GT Special Edition, LE, Ralliart, S, SE, SE Special Edition, SEL, SP, Trail Edition | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Front Speed Sensor, Driver Side Part Number: MR370932
$43.39 MSRP: $60.27
You Save: $16.88 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Front ABS, Left-Hand; ABS Wheel Speed Sensor; Speed Sensor; ABS Sensor
- Position: Driver Side
Fits the following Mitsubishi Models:
- Eclipse | 2000-2005 | GS, GT, GTS, RS, Spyder GS, Spyder GT, Spyder GTS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Galant | 1999-2003 | DE, ES, GTZ, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mitsubishi Front Speed Sensor, Passenger Side Part Number: MR370933
$48.13 MSRP: $66.85
You Save: $18.72 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Front ABS, Right-Hand; ABS Wheel Speed Sensor; Speed Sensor; ABS Sensor
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Eclipse | 2000-2005 | GS, GT, GTS, RS, Spyder GS, Spyder GT, Spyder GTS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Galant | 1999-2003 | DE, ES, GTZ, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mitsubishi ABS Sensor, Passenger Side Part Number: MN113196
$57.43 MSRP: $79.77
You Save: $22.34 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Front ABS, Right-Hand; Speed Sensor; Front Speed Sensor
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Eclipse | 2006-2012 | GS, GS Sport, GT, SE, Spyder GS, Spyder GS Sport, Spyder GT, Spyder SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mitsubishi ABS Sensor, Driver Side Part Number: MN113195
$57.43 MSRP: $79.77
You Save: $22.34 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Front ABS, Left-Hand; Speed Sensor; Front Speed Sensor
- Position: Driver Side
Fits the following Mitsubishi Models:
- Eclipse | 2006-2012 | GS, GS Sport, GT, SE, Spyder GS, Spyder GS Sport, Spyder GT, Spyder SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mitsubishi ABS Sensor, Passenger Side Part Number: 4670A372
$57.43 MSRP: $79.77
You Save: $22.34 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Front ABS, Right-Hand; ABS Wheel Speed Sensor; Speed Sensor; Front Speed Sensor
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Galant | 2004-2012 | DE, ES, FE, GTS, LS, Ralliart, SE, Sport Edition, Sport V6 | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS

| Page 1 of 4 |Next >

1-20 of 73 Results

Mitsubishi Speed Sensor

The Mitsubishi Speed Sensor provides the vehicle computer with instantaneous rotational data, enabling the car to rapidly select the appropriate gear while ensuring robust traction in a wide array of driving conditions. Mitsubishi has over a century turned bold ideas into everyday comfort. From ships, it went on to release the first Model A car and then fill its showrooms with clever MIVEC engines, Super All Wheel Control, and handy smartphone linking. The firm prioritizes robustness, intelligence, and ease of use so families, commuters, and adventurers all feel at home behind the wheel. The company continues to test future-ready powertrains including hybrids and fuel cell trials, thus proving its habit of making innovation practical and affordable for drivers worldwide. Every Speed Sensor is produced with the same philosophy. The Speed Sensor uses a small magnet or a reed element that counts metal teeth as they rotate and then converts those counts into an electric signal. The control unit is able to comprehend this electric signal. Since the reading remains accurate at low and high speeds, shift timing remains smooth, clutch pressure remains balanced, and electronic safety aids know exactly how fast each wheel turns. The rapid flow of information also helps maintain a steady pace on the hills. The Mitsubishi Speed Sensor is built to withstand heat, grime, and road splash; proof that a tiny but crucial component can deliver the big promise of reliable performance and reassurance.

Pick genuine OEM Speed Sensor if you want superb performance and durability that lasts. Mitsubishi builds that using high-grade materials and official factory techniques to meet very strict standards. This means you get parts you can actually trust for your daily drive. Finding the right parts is simple in the massive stock of genuine inventory. You can stop guessing if a part will fit or hold up. You will love the low prices, dependable service and the real manufacturer's warranty on Mitsubishi Speed Sensor. Order today and the store will ship your brand-new items to your door as fast as possible.

Mitsubishi Speed Sensor Parts Questions & Experts Answers

Vehicle Speed Sensor
8651A027
Q: How to remove and install the speed sensors on Mitsubishi Diamante?
A:
In Mirage speed sensor removal and installation, first, disconnect negative battery cable and wait at least 90 seconds before continuing. To begin with the front, lift the vehicle up, remove splash shield, disconnect speed sensor connector, remove clips that hold the harness of the sensor, and take speed sensor out of a bracket. To install, attach the speed sensor to the bracket with a mounting bolt and reinstall the clips. Connect the connector and reconnect the negative battery cable. To get to the rear, do the same steps as before. Unplug the speed sensor connector. Remove the clips and the mounting bolt from the speed sensor. To begin installation, the speed sensor should be loosely tightened. Reinstall the clips, adjust the sensor air gap to a specification of 0.012-0.035 inches, tighten the bracket followed by reconnecting the negative battery cable. When it comes to the Galant, the front process involves disconnecting the negative battery cable, lifting the vehicle, removing the tire and wheel assembly, fender splash shield, and ABS speed sensor connector, and then removing the sensor harness clamp bolts and the sensor. Ensure a clearance of 1.11 to 1.12 inch. Install the ABS speed sensor with its mounting bolt. Reinstall the harness, reconnect the connector. Reassemble the tire and wheel. The steps to disconnect and remove the sensor are the same as those of the front procedure. Subsequently, the two parts are reinstalled. Lastly, the battery cable is reconnected. For the Diamante, you first disconnect the negative terminal of the battery and wait for 90 seconds. Lift the vehicle and remove the splash shield. Detach the speed sensor connector. Then remove the clips and the sensor. Following a torque setting of 9 ft. lbs., rotate the speed sensor of the Torrid and reinstall the clips. Subsequently, connect the sensor and reconnect the battery cable. The rear module is similarly accomplished incorporating the unfastening of the cable band on AWD models, and installation with the exact torque specifications followed by re-connection of the harness and battery cable.
Front Speed Sensor, Passenger Side
MR370933
Q: What is the purpose and function of the anti-lock brake system and what role does the Speed Sensor play on Mitsubishi Galant?
A:
The fundamental purpose of the anti-lock brake system is to ensure steerability, directional stability and deceleration of optimum value to the vehicle during hard braking operations performed on severe road surfaces. The system continuously monitors the rotation speed of each wheel. It includes 3 main parts wheel speed sensors electronic control unit ECU hydraulic unit. The control unit receives variable voltage signals from each of the four wheel speed sensors. It monitors these signals to check whether any of the wheels are about to lock up. The hydraulic unit can then reduce the brake pressure via electrically operated solenoid valves. When there is problem with the ABS system, a warning light "ABS" will glow on the dashboard of the vehicle. Power loss is usually due to defective wiring harness. Most of the ABS wiring harnesses have undergone wear and tear due to chafing or damage. Therefore, visually check removable wiring harnesses close to wheel area. Preliminary checks for troubleshooting may include checking the level of the brake fluid, verifying secure electrical connections, checking fuses, and inspecting wiring harnesses. If you find that these inspections do not help, it is advised to get it checked by a technician. To remove or install the wheel speed sensor, you must first loosen the wheel lugs followed by raising and removing the wheel. With the ignition switched off, trace and disconnect the sensor wiring, disconnect the electrical connector, and remove the mounting bolt to take out the sensor. The process of reinstallation is in reverse order that creates the mounting bolt of the attachment to secures.