How should Brake Line components (metal lines and rubber brake hoses) be checked and maintained to ensure proper braking function on Mitsubishi Diamante?

Brake hose lines made of metal and rubber are required to be inspected regularly in case of leakage and external damages, where metal lines are very likely to be crushed and kinked beneath the vehicle, which may limit the flow of fluids and the ability to brake. Rubber hoses should be checked on cracking or scraping since this could form some weak points that could break when pressure is applied. Removal and disconnection of lines require extreme cleanliness, all connections and joints must be cleaned prior to disassembly, and lines and ports must be plugged as soon as open. Brake fluid should be emptied into new lines and hoses before it is installed. To take off a line or hose, remove the negative battery cable, lift and support the vehicle, and take off any required wheel and tire assembly to do so. Wipe up the surrounding of the joints, put a catch pan under, and with two wrenches, unscrew the hose or line. Unplug the other side, shifting the drain pan, as necessary, and insert a back-up wrench to prevent damaging the fitting. Loose retaining clips or brackets that hold the line. In case the brake system is going to stay open, tape or plug some left-over clips and ports to prevent entry of contaminants. To install, begin with the new line or hose at the end most distant to the master cylinder and make certain to thread both fittings. The new line should not touch any other parts, and should be at least 1/2 inch clearance to steering column and moving parts, with any protective shielding or insulators replaced. Fit any fitting with two wrenches, re-fit any retaining clips or brackets and where possible re-fit the wheel and tire assemblies before lowering the vehicle. Before reconnecting the negative battery cable refill the brake master cylinder reservoir with clean brake fluid that is of DOT 3 specifications and properly bleed the brake system.

How often should flexible hoses connecting steel brake lines be inspected for damage on Mitsubishi Montero?

The flexible hoses that connect the steel brake lines to the front and rear brakes should be examined every six months to check for evidence of cracking, chafing of the outer cover, leakage, blistering, and damage. Replacement steel and flexible brake lines can often be found at dealer parts departments and auto parts stores. Always use only genuine steel lines or approved flexible brake hoses as replacements. While installing the brake line, ensure that there is at least 0.75 inch (19 mm) clearance with all moving and vibrating parts. To separate the hose and line, first, remove the spring clip, after that use a normal wrench to hold the hose and a flare-nut wrench to hold the tube for disconnection. Use the identical wrenches for connecting and installing a new clip, making sure that the tube passes through the center of its grommet. When disconnecting two hoses, use ordinary wrenches on the hose fittings. When connecting, make sure they are not bent, twisted or strained. Steel brake lines usually have clips that retain them along their length. Prior to removing a fixed brake line, all of these clips must be completely removed. After installing the brake line, you should reinstall these clips or new ones if they are damaged. The clips keep the brake line in place and prevent any vibrations that may cause a breakage. Ensure hydraulic system bleeding takes place when removing hose or tubing (if applicable).

Genuine Mitsubishi Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

59 Brake Lines found

View related parts
Mitsubishi Brake Hose, Passenger Side Part Number: 4650A530
$42.78 MSRP: $59.42
You Save: $16.64 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Front Brake, Right-Hand; Brake Hydraulic Hose; Hydraulic Hose; Brake Line; Flex Hose
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Lancer | 2009-2015 | DE, ES, ES Sportback, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Brake Hose Part Number: 4650B622
$42.86 MSRP: $59.53
You Save: $16.67 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Rear Brake(318+189); Hydraulic Hose; Brake Line; Flex Hose
Fits the following Mitsubishi Models:
- Lancer | 2010-2015, 2008 | Evolution GSR, Evolution MR, Evolution MR Touring, Evolution SE | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Brake Hose Part Number: MN116147
$44.62 MSRP: $61.97
You Save: $17.35 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Front Brake; Hydraulic Hose; Brake Line; Flex Hose
Fits the following Mitsubishi Models:
- Outlander | 2005-2006 | LS, Limited, SE, XLS | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Flex Hose Part Number: 4650A702
$50.51 MSRP: $70.15
You Save: $19.64 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Front Brake; Hydraulic Hose; Brake Line; Brake Hose
Fits the following Mitsubishi Models:
- Montero | 2001-2006 | Limited, XLS | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Brake Hose, Passenger Side Part Number: 4650D348
$51.84 MSRP: $72.00
You Save: $20.16 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Rear Brake Wheel SID; Hydraulic Hose; Brake Line; Flex Hose
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Outlander | 2022-2025 | Black Edition, ES, SE, SE Launch Edition, SEL, SEL Launch Edition | 4 Cyl 2.5 L GAS
- Outlander PHEV | 2023-2025 | ES, Platinum Edition, Ralliart, SE, SE Tech, SEL, SEL Premium, SEL Touring | 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Mitsubishi Brake Hose, Driver Side Part Number: 4650D347
$51.84 MSRP: $72.00
You Save: $20.16 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Rear Brake Wheel SID; Hydraulic Hose; Brake Line; Flex Hose
- Position: Driver Side
Fits the following Mitsubishi Models:
- Outlander | 2022-2025 | Black Edition, ES, SE, SE Launch Edition, SEL, SEL Launch Edition | 4 Cyl 2.5 L GAS
- Outlander PHEV | 2023-2025 | ES, Platinum Edition, Ralliart, SE, SE Tech, SEL, SEL Premium, SEL Touring | 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Mitsubishi Brake Hose, Passenger Side Part Number: MR569322
$56.39 MSRP: $78.32
You Save: $21.93 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Front Brake, Right-Hand; Hydraulic Hose; Brake Line; Flex Hose
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Eclipse | 2006-2012 | GS, GS Sport, GT, SE, Spyder GS, Spyder GS Sport, Spyder GT, Spyder SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
- Galant | 2004-2012 | DE, ES, FE, GTS, LS, Ralliart, SE, Sport Edition, Sport V6 | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Brake Hose, Driver Side Part Number: MR569321
$56.39 MSRP: $78.32
You Save: $21.93 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Front Brake, Left-Hand; Hydraulic Hose; Brake Line; Flex Hose
- Position: Driver Side
Fits the following Mitsubishi Models:
- Eclipse | 2006-2012 | GS, GS Sport, GT, SE, Spyder GS, Spyder GS Sport, Spyder GT, Spyder SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
- Galant | 2004-2012 | DE, ES, FE, GTS, LS, Ralliart, SE, Sport Edition, Sport V6 | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Brake Hose, Driver Side Part Number: 4650D287
$59.64 MSRP: $82.83
You Save: $23.19 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Front Brake, Left-Hand; Hydraulic Hose; Brake Line; Flex Hose
- Position: Driver Side
Fits the following Mitsubishi Models:
- Outlander PHEV | 2018-2022 | GT, LE, SEL | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Mitsubishi Brake Hose, Driver Side Part Number: 4650B629
$61.62 MSRP: $85.58
You Save: $23.96 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Rear Brake Body Side; Hydraulic Hose; Brake Line; Flex Hose
- Position: Driver Side
Fits the following Mitsubishi Models:
- Outlander | 2014-2017 | ES, GT, SE, SEL | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander PHEV | 2018-2022 | GT, LE, SEL | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Mitsubishi Brake Hose, Passenger Side Part Number: 4650D388
$63.88 MSRP: $88.72
You Save: $24.84 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Front Brake, Right-Hand; Hydraulic Hose; Brake Line; Flex Hose
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Outlander | 2022-2025 | Black Edition, ES, SE, SE Launch Edition, SEL, SEL Launch Edition | 4 Cyl 2.5 L GAS
- Outlander PHEV | 2023-2025 | ES, Platinum Edition, Ralliart, SE, SE Tech, SEL, SEL Premium, SEL Touring | 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Mitsubishi Brake Hose, Driver Side Part Number: 4650D387
$63.88 MSRP: $88.72
You Save: $24.84 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Front Brake, Left-Hand; Hydraulic Hose; Brake Line; Flex Hose
- Position: Driver Side
Fits the following Mitsubishi Models:
- Outlander | 2022-2025 | Black Edition, ES, SE, SE Launch Edition, SEL, SEL Launch Edition | 4 Cyl 2.5 L GAS
- Outlander PHEV | 2023-2025 | ES, Platinum Edition, Ralliart, SE, SE Tech, SEL, SEL Premium, SEL Touring | 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Mitsubishi Brake Hose, Passenger Side Part Number: 4650B630
$68.46 MSRP: $95.08
You Save: $26.62 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Rear Brake Body Side; Hydraulic Hose; Brake Line; Flex Hose
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Outlander | 2014-2017 | ES, GT, SE, SEL | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander PHEV | 2018-2022 | GT, LE, SEL | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Mitsubishi Flex Hose, Passenger Side Part Number: 4650D272
$77.47 MSRP: $107.60
You Save: $30.13 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Front Brake, Right-Hand; Hydraulic Hose; Brake Line; Brake Hose
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Eclipse Cross | 2022-2025, 2018-2020 | Black Edition, ES, LE, Ralliart, SE, SE Special Edition, SEL, SEL Special Edition, SEL Touring, SP | 4 Cyl 1.5 L GAS
- Outlander | 2017-2020 | ES, GT, LE, SE, SEL, SP | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander Sport | 2017-2025 | BE, ES, GT, GT Special Edition, LE, Ralliart, S, SE, SE Special Edition, SEL, SP, Trail Edition | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View More
View related parts
Mitsubishi Brake Hose, Passenger Side Part Number: 4650D288
$62.63 MSRP: $86.98
You Save: $24.35 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Front Brake, Right-Hand; Hydraulic Hose; Brake Line; Flex Hose
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Outlander PHEV | 2018-2022 | GT, LE, SEL | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Mitsubishi Flex Hose, Driver Side Part Number: 4650D271
$70.43 MSRP: $97.81
You Save: $27.38 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Front Brake, Left-Hand; Hydraulic Hose; Brake Line; Brake Hose
- Position: Driver Side
Fits the following Mitsubishi Models:
- Eclipse Cross | 2022-2025, 2018-2020 | Black Edition, ES, LE, Ralliart, SE, SE Special Edition, SEL, SEL Special Edition, SEL Touring, SP | 4 Cyl 1.5 L GAS
- Outlander | 2017-2020 | ES, GT, LE, SE, SEL, SP | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander Sport | 2017-2025 | BE, ES, GT, GT Special Edition, LE, Ralliart, S, SE, SE Special Edition, SEL, SP, Trail Edition | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View More
View related parts
Mitsubishi Brake Hose, Passenger Side Part Number: 4650B445
$13.62 MSRP: $17.73
You Save: $4.11 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube, Rear Axle Brake, Right-Hand; Hydraulic Hose; Brake Line
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Mirage | 2014 | DE, ES | 3 Cyl 1.2 L GAS
View related parts
Mitsubishi Brake Hose, Driver Side Part Number: 4650B444
$14.23 MSRP: $18.53
You Save: $4.30 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube, Rear Axle Brake, Left-Hand; Hydraulic Hose; Brake Line
- Position: Driver Side
Fits the following Mitsubishi Models:
- Mirage | 2014 | DE, ES | 3 Cyl 1.2 L GAS
View related parts
Mitsubishi Brake Tube, Driver Side Part Number: 4650B673
$14.76 MSRP: $19.22
You Save: $4.46 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube, Rear Axle Brake, Left-Hand; Hydraulic Hose; Brake Line; Flex Hose
- Position: Driver Side
Fits the following Mitsubishi Models:
- Mirage | 2017-2024 | BE, Black Edition, Carbonite Edition, ES, GT, LE, RF, SE | 3 Cyl 1.2 L GAS
- Mirage G4 | 2017-2024 | BE, Carbonite Edition, ES, LE, RF, SE | 3 Cyl 1.2 L GAS
View related parts
Mitsubishi Brake Tube, Passenger Side Part Number: 4650B674
$14.89 MSRP: $19.39
You Save: $4.50 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube, Rear Axle Brake, Right-Hand; Hydraulic Hose; Brake Line; Flex Hose
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Mirage | 2017-2024 | BE, Black Edition, Carbonite Edition, ES, GT, LE, RF, SE | 3 Cyl 1.2 L GAS
- Mirage G4 | 2017-2024 | BE, Carbonite Edition, ES, LE, RF, SE | 3 Cyl 1.2 L GAS

| Page 1 of 3 |Next >

1-20 of 59 Results

Mitsubishi Brake Line

Mitsubishi Brake Line is a highly efficient distribution of hydraulic fluid within the master cylinder to the individual wheel, which provides the driver with sharp pedal response and reliable stopping power. The Brake Line parts are made up of rigid metal tubes with flexible rubber hose to form a closed channel that has to retain pressure even during the vehicle maneuvering over rough roads. Metal will be corroded by road salt, debris will dent the tube, and aging rubber can crack or swell up, but fast visual inspection will identify the problems before the pressure gets out. Direct fit stainless tubing and OEM style hoses can be installed when damaged, and they slide in without any custom bending, reestablishing the circuit to eliminate brake drag or spongy response. Since each Brake Line is built to suit standard diameters and thread sizes, it provides the same quality performance across the entire product line, and upgrades or maintenance is easy for the owners in any location. Originating as a shipping enterprise in 1870, Mitsubishi has expanded into a worldwide automaker that appreciates intelligent engineering and driver assurance. In 1917, the brand introduced the first series production car in Japan, and then it introduced MIVEC engines, which combine power with fuel efficiency, and Super All Wheel Control, which maintains grip on loose gravel or snow. Drivers also have the luxury of cruise control, smartphone connections, and continuous experimentation of fuel cell and hybrid concepts that strive to reduce emissions without losing convenience. Mitsubishi today is a company that tries to strike a balance between hardiness and ease, which lets the family travel with ease without compromising on some of the optimal tech that can withstand everyday life.

Pick genuine OEM Brake Line if you want superb performance and durability that lasts. Mitsubishi builds that using high-grade materials and official factory techniques to meet very strict standards. This means you get parts you can actually trust for your daily drive. Finding the right parts is simple in the massive stock of genuine inventory. You can stop guessing if a part will fit or hold up. You will love the low prices, dependable service and the real manufacturer's warranty on Mitsubishi Brake Line. Order today and the store will ship your brand-new items to your door as fast as possible.

Mitsubishi Brake Line Parts Questions & Experts Answers

Flex Hose
MR129781
Q: How should Brake Line components (metal lines and rubber brake hoses) be checked and maintained to ensure proper braking function on Mitsubishi Diamante?
A:
Brake hose lines made of metal and rubber are required to be inspected regularly in case of leakage and external damages, where metal lines are very likely to be crushed and kinked beneath the vehicle, which may limit the flow of fluids and the ability to brake. Rubber hoses should be checked on cracking or scraping since this could form some weak points that could break when pressure is applied. Removal and disconnection of lines require extreme cleanliness, all connections and joints must be cleaned prior to disassembly, and lines and ports must be plugged as soon as open. Brake fluid should be emptied into new lines and hoses before it is installed. To take off a line or hose, remove the negative battery cable, lift and support the vehicle, and take off any required wheel and tire assembly to do so. Wipe up the surrounding of the joints, put a catch pan under, and with two wrenches, unscrew the hose or line. Unplug the other side, shifting the drain pan, as necessary, and insert a back-up wrench to prevent damaging the fitting. Loose retaining clips or brackets that hold the line. In case the brake system is going to stay open, tape or plug some left-over clips and ports to prevent entry of contaminants. To install, begin with the new line or hose at the end most distant to the master cylinder and make certain to thread both fittings. The new line should not touch any other parts, and should be at least 1/2 inch clearance to steering column and moving parts, with any protective shielding or insulators replaced. Fit any fitting with two wrenches, re-fit any retaining clips or brackets and where possible re-fit the wheel and tire assemblies before lowering the vehicle. Before reconnecting the negative battery cable refill the brake master cylinder reservoir with clean brake fluid that is of DOT 3 specifications and properly bleed the brake system.
Brake Hose
MR129742
Q: How often should flexible hoses connecting steel brake lines be inspected for damage on Mitsubishi Montero?
A:
The flexible hoses that connect the steel brake lines to the front and rear brakes should be examined every six months to check for evidence of cracking, chafing of the outer cover, leakage, blistering, and damage. Replacement steel and flexible brake lines can often be found at dealer parts departments and auto parts stores. Always use only genuine steel lines or approved flexible brake hoses as replacements. While installing the brake line, ensure that there is at least 0.75 inch (19 mm) clearance with all moving and vibrating parts. To separate the hose and line, first, remove the spring clip, after that use a normal wrench to hold the hose and a flare-nut wrench to hold the tube for disconnection. Use the identical wrenches for connecting and installing a new clip, making sure that the tube passes through the center of its grommet. When disconnecting two hoses, use ordinary wrenches on the hose fittings. When connecting, make sure they are not bent, twisted or strained. Steel brake lines usually have clips that retain them along their length. Prior to removing a fixed brake line, all of these clips must be completely removed. After installing the brake line, you should reinstall these clips or new ones if they are damaged. The clips keep the brake line in place and prevent any vibrations that may cause a breakage. Ensure hydraulic system bleeding takes place when removing hose or tubing (if applicable).