How to remove and install the Ignition Lock Cylinder and Ignition Switch on Mitsubishi Lancer?

Remove the ignition switch from the steering column by releasing the steering column adjusting lever and lowering the column to its lowest position. Withdraw the ignition key from the ignition switch first. After that, the retaining screws are removed, and the steering column covers removed. This is followed by delinking the ignition switch wiring from the rear of the ignition switch. Take out the retaining screw and, taking note of its installed position, withdraw the switch from the lock assembly. Place the switch in the same position it was in when removed and screw it to the lock assembly above in a tight manner. Make secure connections to the ignition switch wiring and check the operation of the ignition switch/steering lock before installing the column covers. In order to extract the lock cylinder, the negative battery terminal must get disconnected first, then the steering column adjusting lever has to be released and the column set at its lowest position. Finally, the ignition key has to be withdrawn. Detach the screws and remove the vacuum column covers. Put the ignition key in the lock and turn it to the ACC position. Then, using a thin screwdriver, press down on the locking latch while gently pulling the lock cylinder out of the housing. To install the lock cylinder in the lock housing, turn the ignition key to ACC position and press it down until the mechanism gets locked. Check the steering lock operation before installing the steering column casing.

How to disconnect the negative battery cable and remove the Ignition Switch and Ignition Lock Cylinder from the steering column on Mitsubishi Montero?

Unhook the negative battery cable on the battery, and remove a steering column cover to reach the ignition switch/lock cylinder. The cable band should be taken off using wire cutters and the bolts joining the ignition switch/lock cylinder to the steering column must be removed, on models since 1988, the bolts need to be cut off and new ones put in during reassembling. Then unscrew and take out the key reminder switch, unscrew and remove the ignition switch/lock cylinder in the steering column. Removal is inversely followed by installation.

Genuine Mitsubishi Ignition Lock Cylinder

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

25 Ignition Lock Cylinders found

View related parts
Mitsubishi Ignition Lock Cylinder Part Number: 6370C408
$338.46 MSRP: $478.04
You Save: $139.58 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Steering Lock; Cylinder & Keys; Lock Cylinder
Fits the following Mitsubishi Models:
- Eclipse Cross | 2022-2025, 2018-2020 | Black Edition, ES, LE, Ralliart, SE, SE Special Edition, SEL, SEL Special Edition, SEL Touring, SP | 4 Cyl 1.5 L GAS
View related parts
Mitsubishi Ignition Lock Cylinder Part Number: 6370B848
$352.74 MSRP: $498.21
You Save: $145.47 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Steering Lock; Cylinder & Keys
Fits the following Mitsubishi Models:
- Outlander | 2014-2016 | ES, GT, SE, SEL | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander Sport | 2013-2016 | ES, GT, LE, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Cylinder & Keys Part Number: 6370C241
$392.42 MSRP: $554.27
You Save: $161.85 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Steering Lock; Ignition Lock Cylinder
Fits the following Mitsubishi Models:
- Lancer | 2016-2017 | ES, GT, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Ignition Lock Cylinder Part Number: 6370C117
$398.66 MSRP: $563.09
You Save: $164.43 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Steering Lock; Ignition Cylinder
Fits the following Mitsubishi Models:
- Mirage | 2017-2024 | BE, Black Edition, Carbonite Edition, ES, GT, LE, RF, SE | 3 Cyl 1.2 L GAS
- Mirage G4 | 2017-2024 | BE, Carbonite Edition, ES, LE, RF, SE | 3 Cyl 1.2 L GAS
View related parts
Mitsubishi Ignition Lock Cylinder Part Number: 6370B527
$413.18 MSRP: $583.58
You Save: $170.40 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Steering Lock; Cylinder & Keys
Fits the following Mitsubishi Models:
- Outlander Sport | 2011-2012 | ES, SE | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Cylinder & Keys Part Number: 6370A859
$435.07 MSRP: $614.49
You Save: $179.42 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Steering Lock; Ignition Lock Cylinder
Fits the following Mitsubishi Models:
- Lancer | 2008-2016 | ES, ES Sportback, Evolution GSR, Evolution MR, Evolution MR Touring, Evolution SE, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Ignition Lock Cylinder Part Number: 6370A369
$435.07 MSRP: $614.49
You Save: $179.42 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Steering Lock; Cylinder & Keys
Fits the following Mitsubishi Models:
- Eclipse | 2008-2012 | GS, GS Sport, GT, SE, Spyder GS, Spyder GS Sport, Spyder GT, Spyder SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Ignition Lock Cylinder Part Number: 6370C283
$467.36 MSRP: $660.12
You Save: $192.76 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Steering Lock; Cylinder & Keys
Fits the following Mitsubishi Models:
- Outlander | 2017-2020 | ES, GT, LE, SE, SEL, SP | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander PHEV | 2018-2020 | GT, SEL | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- Outlander Sport | 2016-2025 | BE, ES, GT, GT Special Edition, LE, Ralliart, S, SE, SE Special Edition, SEL, SP, Trail Edition | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View More
View related parts
Mitsubishi Cylinder & Keys Part Number: MB802151
$53.34 MSRP: $74.08
You Save: $20.74 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Steering Lock; Ignition Lock Cylinder
Fits the following Mitsubishi Models:
- Diamante | 1992-1996 | ES, LS | 6 Cyl 3.0 L GAS
- Galant | 1994 | ES, GS, LS, S | 4 Cyl 2.4 L GAS
- Montero | 1992-1994 | Base, LS, RS, SR | 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
View More
View related parts
Mitsubishi Ignition Lock Cylinder Part Number: MR954938
$57.64 MSRP: $80.05
You Save: $22.41 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Steering Lock; Cylinder & Keys
Fits the following Mitsubishi Models:
- Lancer | 2004 | Evolution | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Ignition Lock Cylinder Part Number: 6370A184
$62.12 MSRP: $86.28
You Save: $24.16 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Steering Lock; Cylinder & Keys
Fits the following Mitsubishi Models:
- Lancer | 2005-2007 | ES, OZ Rally, Ralliart, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Ignition Lock Cylinder Part Number: MB888092
$59.68 MSRP: $82.88
You Save: $23.20 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Steering Lock; Cylinder & Keys; Lock Cylinder
Fits the following Mitsubishi Models:
- 3000GT | 1991-1999 | Base, SL, Spyder SL, Spyder VR-4, VR-4 | 6 Cyl 3.0 L GAS
- Diamante | 1995-1996 | ES, LS | 6 Cyl 3.0 L GAS
- Eclipse | 1995-1999 | Base, GS, GST, GSX, RS, Spyder GS, Spyder GST | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Expo | 1992-1995 | Base, SP | 4 Cyl 2.4 L GAS
- Expo LRV | 1992-1994 | Base, Sport | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
- Galant | 1994-1998 | DE, ES, GS, LS, S | 4 Cyl 2.4 L GAS
- Montero | 1995 | LS, SR | 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
- Montero Sport | 1997-1999 | ES, LS, Limited, XLS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
View More
View related parts
Mitsubishi Ignition Lock Cylinder Part Number: 05018702AA
$152.46 MSRP: $206.58
You Save: $54.12 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Steering Lock; Ignition Cylinder
Fits the following Mitsubishi Models:
- Raider | 2006-2009 | DuroCross, LS, SE, XLS | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS
View related parts
Mitsubishi Ignition Lock Cylinder Part Number: 6370A858
$159.73 MSRP: $216.43
You Save: $56.70 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Steering Lock; Cylinder & Keys
Fits the following Mitsubishi Models:
- Lancer | 2008-2015 | DE, ES, Evolution GSR, Evolution MR, Evolution MR Touring, Evolution SE, GT, GTS, Ralliart, Ralliart Sportback, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Ignition Lock Cylinder Part Number: MR535867
$199.40 MSRP: $270.18
You Save: $70.78 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Steering Lock; Cylinder & Keys
Fits the following Mitsubishi Models:
- Montero | 2001-2002 | Limited, XLS | 6 Cyl 3.5 L GAS
View related parts
Mitsubishi Ignition Lock Cylinder Part Number: MR555351
$21.50 MSRP: $28.00
You Save: $6.50 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Steering Lock; Cylinder & Keys
Fits the following Mitsubishi Models:
- Lancer | 2002-2004 | ES, Evolution, LS, OZ Rally, Ralliart, Sportback, Sportback Ralliart | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Outlander | 2003 | LS, XLS | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Ignition Cylinder Part Number: MN101682
$38.21 MSRP: $50.14
You Save: $11.93 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Engine Starting; Ignition Lock Cylinder; Cylinder Switch
Fits the following Mitsubishi Models:
- Lancer | 2003-2006 | Evolution, Evolution MR, Evolution RS, Evolution SE | 4 Cyl 2.0 L GAS
- Outlander | 2005-2006 | LS, Limited, SE, XLS | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Cylinder & Keys Part Number: 48700W240P
$390.37 MSRP: $551.37
You Save: $161.00 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Steering Lock; Ignition Lock Cylinder
- Replaces: 6370A862
Fits the following Mitsubishi Models:
- Lancer | 2008-2017 | DE, ES, ES Sportback, Evolution GSR, Evolution MR, Evolution MR Touring, Evolution SE, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Ignition Lock Cylinder Part Number: 48700W220P
$390.37 MSRP: $551.37
You Save: $161.00 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Steering Lock; Cylinder & Keys
- Replaces: 6370A814
Fits the following Mitsubishi Models:
- Outlander | 2007-2013 | ES, GT, LS, SE, XLS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mitsubishi Ignition Lock Cylinder Part Number: MR555350
Product Specifications
- Other Name: Cylinder, Steering Lock; Cylinder & Keys
Fits the following Mitsubishi Models:
- Lancer | 2002-2004 | ES, LS, OZ Rally, Ralliart, Sportback, Sportback Ralliart | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

| Page 1 of 2 |Next >

1-20 of 25 Results

Mitsubishi Ignition Lock Cylinder

Mitsubishi Ignition Lock Cylinder protects all drives by connecting a coded key to the starter, steering, and onboard electronics. This allows drivers to start up, use the components, or lock the wheel with a simple turn of the key. Mitsubishi was established as a shipping company in 1870 and has since expanded into an international car manufacturer that incorporates tradition and innovative technologies. Its MIVEC engines strike a balance between fuel economy and a punchy response. Super All Wheel Control ensures that traction remains stable even on gravel or snow, and plug-in hybrid choices provide families with flexibility in their efficiency without any range concerns. Indoors, cruise control simplifies the long journey, and smartphone connection infotainment makes maps and music easy to navigate. Continuous experiments in fuel cell drive and driver assist sensors demonstrate a desire to be smarter and safer on the road. Today, Mitsubishi is interested in active innovation that defines large and small components throughout the line. The Ignition Lock Cylinder is located next to the steering wheel and takes a specially cut, electronically coded key. It transfers battery power via LOCK, ACC, ON, and START positions. In START, it supplies the starter motor and spark and fuel circuits. In ON, it maintains the engine and cabin electronics alive. In ACC, it allows music to be played with the engine off, and in LOCK, it shuts power off, allows key out, and clamps the steering shaft to prevent theft. Since the Ignition Lock Cylinder is also connected to the electronic signal, any attempt to act forcefully does not start the engine, which could be regarded as a sign of reliable security during the collection.

Pick genuine OEM Ignition Lock Cylinder if you want superb performance and durability that lasts. Mitsubishi builds that using high-grade materials and official factory techniques to meet very strict standards. This means you get parts you can actually trust for your daily drive. Finding the right parts is simple in the massive stock of genuine inventory. You can stop guessing if a part will fit or hold up. You will love the low prices, dependable service and the real manufacturer's warranty on Mitsubishi Ignition Lock Cylinder. Order today and the store will ship your brand-new items to your door as fast as possible.

Mitsubishi Ignition Lock Cylinder Parts Questions & Experts Answers

Ignition Lock Cylinder
6370A184
Q: How to remove and install the Ignition Lock Cylinder and Ignition Switch on Mitsubishi Lancer?
A:
Remove the ignition switch from the steering column by releasing the steering column adjusting lever and lowering the column to its lowest position. Withdraw the ignition key from the ignition switch first. After that, the retaining screws are removed, and the steering column covers removed. This is followed by delinking the ignition switch wiring from the rear of the ignition switch. Take out the retaining screw and, taking note of its installed position, withdraw the switch from the lock assembly. Place the switch in the same position it was in when removed and screw it to the lock assembly above in a tight manner. Make secure connections to the ignition switch wiring and check the operation of the ignition switch/steering lock before installing the column covers. In order to extract the lock cylinder, the negative battery terminal must get disconnected first, then the steering column adjusting lever has to be released and the column set at its lowest position. Finally, the ignition key has to be withdrawn. Detach the screws and remove the vacuum column covers. Put the ignition key in the lock and turn it to the ACC position. Then, using a thin screwdriver, press down on the locking latch while gently pulling the lock cylinder out of the housing. To install the lock cylinder in the lock housing, turn the ignition key to ACC position and press it down until the mechanism gets locked. Check the steering lock operation before installing the steering column casing.
Cylinder & Keys
MB802151
Q: How to disconnect the negative battery cable and remove the Ignition Switch and Ignition Lock Cylinder from the steering column on Mitsubishi Montero?
A:
Unhook the negative battery cable on the battery, and remove a steering column cover to reach the ignition switch/lock cylinder. The cable band should be taken off using wire cutters and the bolts joining the ignition switch/lock cylinder to the steering column must be removed, on models since 1988, the bolts need to be cut off and new ones put in during reassembling. Then unscrew and take out the key reminder switch, unscrew and remove the ignition switch/lock cylinder in the steering column. Removal is inversely followed by installation.