How to remove and install the Ignition Lock Cylinder and Ignition Switch on Mitsubishi Lancer?

Remove the ignition switch from the steering column by releasing the steering column adjusting lever and lowering the column to its lowest position. Withdraw the ignition key from the ignition switch first. After that, the retaining screws are removed, and the steering column covers removed. This is followed by delinking the ignition switch wiring from the rear of the ignition switch. Take out the retaining screw and, taking note of its installed position, withdraw the switch from the lock assembly. Place the switch in the same position it was in when removed and screw it to the lock assembly above in a tight manner. Make secure connections to the ignition switch wiring and check the operation of the ignition switch/steering lock before installing the column covers. In order to extract the lock cylinder, the negative battery terminal must get disconnected first, then the steering column adjusting lever has to be released and the column set at its lowest position. Finally, the ignition key has to be withdrawn. Detach the screws and remove the vacuum column covers. Put the ignition key in the lock and turn it to the ACC position. Then, using a thin screwdriver, press down on the locking latch while gently pulling the lock cylinder out of the housing. To install the lock cylinder in the lock housing, turn the ignition key to ACC position and press it down until the mechanism gets locked. Check the steering lock operation before installing the steering column casing.

How to disconnect the negative battery cable and remove the Ignition Switch and Ignition Lock Cylinder from the steering column on Mitsubishi Montero?

Unhook the negative battery cable on the battery, and remove a steering column cover to reach the ignition switch/lock cylinder. The cable band should be taken off using wire cutters and the bolts joining the ignition switch/lock cylinder to the steering column must be removed, on models since 1988, the bolts need to be cut off and new ones put in during reassembling. Then unscrew and take out the key reminder switch, unscrew and remove the ignition switch/lock cylinder in the steering column. Removal is inversely followed by installation.

Genuine Mitsubishi Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

19 Ignition Switches found

View related parts
Mitsubishi Ignition Switch Part Number: 4408A136
$273.89 MSRP: $386.85
You Save: $112.96 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Engine Startin
- Replaced by: 48700W030P
Fits the following Mitsubishi Models:
- Outlander Sport | 2011-2013 | ES, LE, SE | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Ignition Switch Part Number: 4408A177
$308.74 MSRP: $436.07
You Save: $127.33 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Engine Startin; Steering Lock; Lock Housing
- Replaced by: 48700W080P
Fits the following Mitsubishi Models:
- Eclipse Cross | 2022-2025, 2018-2020 | Black Edition, ES, LE, Ralliart, SE, SE Special Edition, SEL, SEL Special Edition, SEL Touring, SP | 4 Cyl 1.5 L GAS
- Outlander | 2014-2020 | ES, GT, LE, SE, SEL, SP | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander PHEV | 2018-2020 | GT, SEL | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- Outlander Sport | 2014-2025 | BE, ES, GT, GT Special Edition, LE, Ralliart, S, SE, SE Special Edition, SEL, SP, Trail Edition | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View More
View related parts
Mitsubishi Ignition Switch Part Number: 8602A010
$46.62 MSRP: $64.76
You Save: $18.14 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Engine Starting
Fits the following Mitsubishi Models:
- Eclipse | 2000-2009 | GS, GT, GTS, RS, SE, Spyder GS, Spyder GT, Spyder GTS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
- Endeavor | 2004-2008 | LS, Limited, SE, XLS | 6 Cyl 3.8 L GAS
- Galant | 1999-2006 | DE, ES, GTS, GTZ, LS, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View More
View related parts
Mitsubishi Ignition Switch Part Number: MB903639
$49.63 MSRP: $68.94
You Save: $19.31 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Engine Starting; Lock Switch
Fits the following Mitsubishi Models:
- Diamante | 1997-2004 | Base, ES, LS, VR-X | 6 Cyl 3.5 L GAS
- Eclipse | 1995-1999 | Base, GS, GST, GSX, RS, Spyder GS, Spyder GST | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Expo | 1994-1995 | Base | 4 Cyl 2.4 L GAS
- Expo LRV | 1994 | Base, Sport | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
- Galant | 1994-1998 | DE, ES, GS, LS, S | 4 Cyl 2.4 L GAS
- Montero | 1994-2006 | Base, LS, Limited, SR, XLS | 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
View More
View related parts
Mitsubishi Start Button Part Number: 8610A170
$66.43 MSRP: $92.27
You Save: $25.84 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Engine Starting; Ignition Switch; Power Switch
Fits the following Mitsubishi Models:
- Eclipse Cross | 2022-2025, 2018-2020 | Black Edition, ES, LE, Ralliart, SE, SE Special Edition, SEL, SEL Special Edition, SEL Touring, SP | 4 Cyl 1.5 L GAS
View related parts
Mitsubishi Start Button Part Number: 8610A252
$85.63 MSRP: $118.93
You Save: $33.30 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Engine Starting; Ignition Switch; Power Switch
Fits the following Mitsubishi Models:
- Outlander | 2022-2025 | Black Edition, ES, SE, SE Launch Edition, SEL, SEL Launch Edition | 4 Cyl 2.5 L GAS
View related parts
Mitsubishi Ignition Switch Part Number: 4408A176
$110.83 MSRP: $153.93
You Save: $43.10 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Engine Startin
Fits the following Mitsubishi Models:
- Outlander Sport | 2017-2021 | BE, ES, GT, LE, S, SE, SEL, SP | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Ignition Switch Part Number: MN113754
$83.46 MSRP: $112.79
You Save: $29.33 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Engine Starting; Ignition Starter Switch
Fits the following Mitsubishi Models:
- Lancer | 2002-2017 | DE, ES, ES Sportback, Evolution, Evolution GSR, Evolution MR, Evolution MR Touring, Evolution RS, Evolution SE, GT, GT Sportback, GTS, GTS Sportback, LS, OZ Rally, Ralliart, Ralliart Sportback, SE, SEL, Sportback, Sportback Ralliart | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Outlander | 2003-2013 | ES, GT, LS, Limited, SE, XLS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mitsubishi Start Button Part Number: 8610A253
$125.51 MSRP: $170.07
You Save: $44.56 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, EV Power; Ignition Switch; Power Switch
Fits the following Mitsubishi Models:
- Outlander PHEV | 2023-2025 | ES, Platinum Edition, Ralliart, SE, SE Tech, SEL, SEL Premium, SEL Touring | 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Mitsubishi Ignition Switch Part Number: 4408A138
$131.71 MSRP: $178.47
You Save: $46.76 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Engine Startin
Fits the following Mitsubishi Models:
- Outlander Sport | 2011-2013 | ES, LE, SE | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Power Switch Silver Part Number: 8610A319
$146.54 MSRP: $198.57
You Save: $52.03 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Engine Starting; Ignition Switch; Start Button
Fits the following Mitsubishi Models:
- Mirage | 2017-2022, 2014-2015 | Black Edition, Carbonite Edition, DE, ES, GT, LE, RF, SE | 3 Cyl 1.2 L GAS
- Mirage G4 | 2017-2022 | BE, Carbonite Edition, ES, LE, RF, SE | 3 Cyl 1.2 L GAS
- Outlander Sport | 2011-2018 | ES, GT, LE, SE, SEL | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View More
View related parts
Mitsubishi Ignition Switch Part Number: 8610A269
$148.56 MSRP: $201.30
You Save: $52.74 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Engine Starting; Power Switch
Fits the following Mitsubishi Models:
- Mirage | 2021-2024 | BE, Black Edition, Carbonite Edition, ES, LE, SE | 3 Cyl 1.2 L GAS
- Mirage G4 | 2021-2024 | BE, Carbonite Edition, ES, LE, SE | 3 Cyl 1.2 L GAS
View related parts
Mitsubishi Start Button Part Number: 8610A133
$157.61 MSRP: $213.57
You Save: $55.96 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, EV Power; Ignition Switch; Power Switch
Fits the following Mitsubishi Models:
- Outlander PHEV | 2018-2022 | GT, LE, SEL | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Mitsubishi Start Button Chrome Part Number: 8610A150
$159.56 MSRP: $216.21
You Save: $56.65 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Engine Starting; Ignition Switch; Power Switch
Fits the following Mitsubishi Models:
- Outlander | 2014-2020 | ES, GT, LE, SE, SEL, SP | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander Sport | 2016-2025, 2013 | BE, ES, GT, GT Special Edition, LE, Ralliart, S, SE, SE Special Edition, SEL, SP, Trail Edition | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Ignition Switch Part Number: 8602A011
$65.96 MSRP: $87.75
You Save: $21.79 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Engine Starting
Fits the following Mitsubishi Models:
- Eclipse | 2008-2012 | GS, GS Sport, GT, SE, Spyder GS, Spyder GS Sport, Spyder GT, Spyder SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
- Endeavor | 2010-2011, 2007-2008 | LS, SE | 6 Cyl 3.8 L GAS
- Galant | 2007-2012 | DE, ES, FE, GTS, Ralliart, SE, Sport Edition, Sport V6 | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
View More
View related parts
Mitsubishi Ignition Switch Part Number: 4408A320
$537.97 MSRP: $708.55
You Save: $170.58 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Engine Startin
Fits the following Mitsubishi Models:
- Outlander Sport | 2011-2013 | ES, LE, SE | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Ignition Switch Part Number: MR123396
$11.53 MSRP: $15.02
You Save: $3.49 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Engine Starting
Fits the following Mitsubishi Models:
- Montero Sport | 1997-2004 | ES, LS, Limited, XLS, XS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
Mitsubishi Ignition Switch Part Number: MB398854
$40.03 MSRP: $52.53
You Save: $12.50 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Ignition; Switch
Fits the following Mitsubishi Models:
- Montero | 1990-1991 | Base, LS, RS, SP, Sport | 6 Cyl 3.0 L GAS
- Starion | 1985-1989 | ES, ESi, ESi-R, LE, LS | 4 Cyl 2.6 L GAS
View related parts
Mitsubishi Ignition Switch Part Number: MB629662
$40.88 MSRP: $53.65
You Save: $12.77 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Engine Starting
Fits the following Mitsubishi Models:
- Expo | 1992-1993 | Base, SP | 4 Cyl 2.4 L GAS
- Expo LRV | 1992-1993 | Base, Sport | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
- Montero | 1992-1993 | Base, LS, RS, SR | 6 Cyl 3.0 L GAS
View More

Mitsubishi Ignition Switch

Mitsubishi Ignition Switch power routing allows every driver to start the engine, enjoy components and lock the steering with a simple turn. Mitsubishi has steadily progressed from its shipbuilding origins to a worldwide automaker. The company is known for its crossover, sedan, and compact creation. Moreover, these companies share vivacious MIVEC engines and fuel-friendly hybrid alternatives. Finally, all these offerings are powered by the company's award-winning Super All Wheel Control system that confidently grips gravel or snow. The automaker focuses on various cabin tech like smartphone link and cruise control so that the teen and parent can concentrate on the road. Meanwhile, its experiments with fuel cells and city electric fleets are evidence that the Mitsubishi is serious about clean mobility without compromising on the brand's strength. Each vehicle is designed to combine smart features with simple maintenance to make ownership hassle-free and fun. The Ignition Switch acts as a master switch and allows battery current to flow to electrical systems through the Lock, Acc, On and Start positions. The Ignition Switch is coded so that you can prevent theft, and when the vehicle is cranked it goes back to the On position so that the driving systems can stay energized. The internal contacts have been designed and manufactured to tight tolerances so that vibration is eliminated, preventing stalls and flickering lights, and a worn part can be replaced to ensure smooth starts. This Japanese brand has a standardized Ignition Switch across its entire lineup, meaning whether you are driving a hatchback or an SUV, it will operate the same.

Pick genuine OEM Ignition Switch if you want superb performance and durability that lasts. Mitsubishi builds that using high-grade materials and official factory techniques to meet very strict standards. This means you get parts you can actually trust for your daily drive. Finding the right parts is simple in the massive stock of genuine inventory. You can stop guessing if a part will fit or hold up. You will love the low prices, dependable service and the real manufacturer's warranty on Mitsubishi Ignition Switch. Order today and the store will ship your brand-new items to your door as fast as possible.

Mitsubishi Ignition Switch Parts Questions & Experts Answers

Ignition Switch
MN113754
Q: How to remove and install the Ignition Lock Cylinder and Ignition Switch on Mitsubishi Lancer?
A:
Remove the ignition switch from the steering column by releasing the steering column adjusting lever and lowering the column to its lowest position. Withdraw the ignition key from the ignition switch first. After that, the retaining screws are removed, and the steering column covers removed. This is followed by delinking the ignition switch wiring from the rear of the ignition switch. Take out the retaining screw and, taking note of its installed position, withdraw the switch from the lock assembly. Place the switch in the same position it was in when removed and screw it to the lock assembly above in a tight manner. Make secure connections to the ignition switch wiring and check the operation of the ignition switch/steering lock before installing the column covers. In order to extract the lock cylinder, the negative battery terminal must get disconnected first, then the steering column adjusting lever has to be released and the column set at its lowest position. Finally, the ignition key has to be withdrawn. Detach the screws and remove the vacuum column covers. Put the ignition key in the lock and turn it to the ACC position. Then, using a thin screwdriver, press down on the locking latch while gently pulling the lock cylinder out of the housing. To install the lock cylinder in the lock housing, turn the ignition key to ACC position and press it down until the mechanism gets locked. Check the steering lock operation before installing the steering column casing.
Ignition Switch
MB398854
Q: How to disconnect the negative battery cable and remove the Ignition Switch and Ignition Lock Cylinder from the steering column on Mitsubishi Montero?
A:
Unhook the negative battery cable on the battery, and remove a steering column cover to reach the ignition switch/lock cylinder. The cable band should be taken off using wire cutters and the bolts joining the ignition switch/lock cylinder to the steering column must be removed, on models since 1988, the bolts need to be cut off and new ones put in during reassembling. Then unscrew and take out the key reminder switch, unscrew and remove the ignition switch/lock cylinder in the steering column. Removal is inversely followed by installation.