How to remove and install the rear lower control arm on Mitsubishi Lancer?

In order to lower control arm removal and installation, first raise the rear of the vehicle and support it on jackstands. Remove rear wheel. Eccentric Bolt and Plate Installation Procedure: Mark the installed position using quick drying paint and remove the inner and outer pivot bolts from the lower control arm's chassis and trailing arm connections.Mark the installed position of the eccentric bolt and plate at the inner end of the lower control arm using quick drying paint. Remove the inner and outer pivot bolts from the lower control arm's chassis and trailing arm connections. Subsequently, take out the suspension unit to lower control arm retaining nut and withdraw the bolt then take out the lower control arm from the vehicle. Check the control arm bushes for wear and deterioration, check the control arms for cracks and damage, check the bolts and nuts for wear and damage, renewing as necessary. To install the assembly, place the lower control arm back into the vehicle assembly and insert the pivot bolts without tighten the nuts at now. Fit the rear wheel after loosely putting the suspension unit retaining bolt and nut in place. Lower the vehicle to the ground and bounce the rear end up and down several times to stabilize the suspension, ensuring the mark made during removal on the eccentric bolt and plate are in the correct alignment. With the weight of the vehicle on the wheels, tighten the nuts of the pivot bolt to torque. To renew the bushes, you need to first remove lower control arm and also observe position and direction of bush. Utilize a suitable press and press plate or pipe and support the lower control arm correctly around the bush housing. Ensure that nothing stops the bush from being pressed out. To press out the spacer and bush from the lower control arm, employ a spacer that is a little smaller than the bush's outer diameter; this will prevent distortion of the lower control arm in the vicinity of the bush housing. Always support lower control arm securely and squarely, preferably using either a manufacturing designed lower control arm bush pressing or a shop press base to maintain vertical pressure. Ensure that the bush and bush recess of control arm are lubricated with a soapy solution. Gently press the bush into the control arm, in the opposite direction to that of removal, before reinstalling lower control arm.

Genuine Mitsubishi Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

92 Control Arms found

View related parts
Mitsubishi Lower Control Arm, Driver Side Part Number: MR496795
$243.88 MSRP: $344.47
You Save: $100.59 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Suspension, Lower Left-Hand; Control Arm Assembly; Control Arm
- Position: Driver Side
Fits the following Mitsubishi Models:
- Montero | 2001-2006 | Limited, XLS | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Lower Control Arm, Passenger Side Part Number: 4013A462
$245.04 MSRP: $346.10
You Save: $101.06 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Suspension, Lower Right-Hand; Control Arm Assembly; Track Control Arm; Control Arm
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Lancer | 2002-2007 | ES, LS, OZ Rally, Ralliart, SE, Sportback, Sportback Ralliart | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lower Control Arm, Passenger Side Part Number: 4013A544
$245.96 MSRP: $347.39
You Save: $101.43 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Suspension, Lower Right-Hand; Control Arm
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Eclipse Cross | 2018-2020 | ES, LE, SE, SEL, SP | 4 Cyl 1.5 L GAS
View related parts
Mitsubishi Lower Control Arm, Driver Side Part Number: 4013A543
$247.23 MSRP: $349.20
You Save: $101.97 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Suspension, Lower Left-Hand; Control Arm
- Position: Driver Side
Fits the following Mitsubishi Models:
- Eclipse Cross | 2018-2020 | ES, LE, SE, SEL, SP | 4 Cyl 1.5 L GAS
View related parts
Mitsubishi Lower Control Arm, Driver Side Part Number: 4113A037
$252.74 MSRP: $356.98
You Save: $104.24 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Rear Suspension, Lower Left-Hand; Control Arm
- Position: Driver Side
Fits the following Mitsubishi Models:
- Outlander | 2007-2013 | ES, GT, LS, SE, XLS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mitsubishi Lower Control Arm, Passenger Side Part Number: 4013A132
$254.27 MSRP: $359.13
You Save: $104.86 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Suspension, Lower Right-Hand; Control Arm Assembly; Control Arm
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Outlander | 2005-2006 | Limited, SE, XLS | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lower Control Arm Part Number: 4113A049
$255.43 MSRP: $360.78
You Save: $105.35 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Rear Suspension, Lower; Control Arm
Fits the following Mitsubishi Models:
- Lancer | 2010-2015, 2008 | Evolution Final Edition, Evolution GSR, Evolution MR, Evolution MR Touring, Evolution SE | 4 Cyl 2.0 L GAS
View related parts
Mitsubishi Lower Control Arm Part Number: 4013A130
$259.52 MSRP: $366.55
You Save: $107.03 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Suspension, Lower Right-Hand; Control Arm
Fits the following Mitsubishi Models:
- Outlander | 2006 | LS | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lower Control Arm Part Number: 4013A129
$259.52 MSRP: $366.55
You Save: $107.03 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Suspension, Lower Left-Hand; Control Arm
Fits the following Mitsubishi Models:
- Outlander | 2006 | LS | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lower Control Arm, Driver Side Part Number: 4013A131
$265.41 MSRP: $374.86
You Save: $109.45 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Suspension, Lower Left-Hand; Control Arm Assembly; Control Arm
- Position: Driver Side
Fits the following Mitsubishi Models:
- Outlander | 2005-2006 | Limited, SE, XLS | 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lower Control Arm, Passenger Side Part Number: 4013A704
$266.34 MSRP: $376.18
You Save: $109.84 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Suspension, Lower Right-Hand; Control Arm
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Eclipse Cross | 2022-2025 | Black Edition, ES, LE, Ralliart, SE, SE Special Edition, SEL, SEL Special Edition, SEL Touring | 4 Cyl 1.5 L GAS
View related parts
Mitsubishi Lower Control Arm, Driver Side Part Number: 4013A703
$266.34 MSRP: $376.18
You Save: $109.84 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Suspension, Lower Left-Hand; Control Arm
- Position: Driver Side
Fits the following Mitsubishi Models:
- Eclipse Cross | 2022-2025 | Black Edition, ES, LE, Ralliart, SE, SE Special Edition, SEL, SEL Special Edition, SEL Touring | 4 Cyl 1.5 L GAS
View related parts
Mitsubishi Lower Control Arm, Driver Side Part Number: 4013A461
$269.55 MSRP: $380.71
You Save: $111.16 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Suspension, Lower Left-Hand; Control Arm Assembly; Track Control Arm; Control Arm
- Position: Driver Side
Fits the following Mitsubishi Models:
- Lancer | 2002-2007 | ES, LS, OZ Rally, Ralliart, SE, Sportback, Sportback Ralliart | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Upper Control Arm, Driver Side Part Number: 4010A139
$272.18 MSRP: $384.43
You Save: $112.25 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Suspension, Upper Left-Hand; Control Arm Assembly; Control Arm
- Position: Driver Side
Fits the following Mitsubishi Models:
- Montero | 2001-2006 | Limited, XLS | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mitsubishi Lower Control Arm, Driver Side Part Number: 4013A443
$282.96 MSRP: $399.66
You Save: $116.70 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Suspension, Lower Left-Hand; Control Arm Assembly; Control Arm
- Position: Driver Side
Fits the following Mitsubishi Models:
- Outlander | 2014-2015 | ES, GT, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander Sport | 2017-2025 | BE, ES, GT, GT Special Edition, LE, Ralliart, S, SE, SE Special Edition, SEL, SP, Trail Edition | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Mitsubishi Lower Control Arm, Passenger Side Part Number: 4013A584
$285.63 MSRP: $403.43
You Save: $117.80 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Suspension, Lower Right-Hand; Control Arm
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Outlander | 2022-2025 | Black Edition, ES, SE, SE Launch Edition, SEL, SEL Launch Edition | 4 Cyl 2.5 L GAS
- Outlander PHEV | 2023-2025 | ES, Platinum Edition, Ralliart, SE, SE Tech, SEL, SEL Premium, SEL Touring | 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Mitsubishi Lower Control Arm, Driver Side Part Number: 4013A583
$285.63 MSRP: $403.43
You Save: $117.80 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Suspension, Lower Left-Hand; Control Arm
- Position: Driver Side
Fits the following Mitsubishi Models:
- Outlander | 2022-2025 | Black Edition, ES, SE, SE Launch Edition, SEL, SEL Launch Edition | 4 Cyl 2.5 L GAS
- Outlander PHEV | 2023-2025 | ES, Platinum Edition, Ralliart, SE, SE Tech, SEL, SEL Premium, SEL Touring | 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Mitsubishi Lower Control Arm, Passenger Side Part Number: 4013A500
$285.64 MSRP: $403.44
You Save: $117.80 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Suspension, Lower Right-Hand; Control Arm Assembly; Control Arm
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Outlander | 2016-2020 | ES, GT, LE, SE, SEL, SP | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander PHEV | 2018-2022 | GT, LE, SEL | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Mitsubishi Lower Control Arm, Driver Side Part Number: 4013A499
$285.64 MSRP: $403.44
You Save: $117.80 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Suspension, Lower Left-Hand; Control Arm Assembly; Control Arm
- Position: Driver Side
Fits the following Mitsubishi Models:
- Outlander | 2016-2020 | ES, GT, LE, SE, SEL, SP | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander PHEV | 2018-2022 | GT, LE, SEL | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Mitsubishi Lower Control Arm, Passenger Side Part Number: 4013A444
$291.34 MSRP: $411.50
You Save: $120.16 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Front Suspension, Lower Right-Hand; Control Arm Assembly; Control Arm
- Position: Passenger Side
Fits the following Mitsubishi Models:
- Outlander | 2014-2015 | ES, GT, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Outlander Sport | 2017-2025 | BE, ES, GT, GT Special Edition, LE, Ralliart, S, SE, SE Special Edition, SEL, SP, Trail Edition | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

| Page 1 of 5 |Next >

1-20 of 92 Results

Mitsubishi Control Arm

The Mitsubishi Control Arm is responsible for linking the wheel to the rest of the vehicle's suspension while allowing it to glide over bumps smoothly. This allows for stable steering and a comfortable ride. In 1917, Mitsubishi built its first passenger car, which began its life as a shipping company. Today, it is a worldwide auto manufacturer that produces reliable powertrains, smart safety sensors, and other smart features that feel natural even to first-time drivers. The MIVEC engine system of the brand offers energetic performance and efficient fuel economy. Furthermore, the Super All Wheel Control ensures excellent torque distribution over different surfaces. Finally, the popular plug-in hybrid SUV demonstrates the company's balance of electric efficiency and practicality. The cruise functions guided by voice and the links to the smartphone make long journeys easier, while the research into fuel cells promises cleaner journeys. All these innovations have a common goal of ensuring that each trip becomes relaxed, safe, and fun. The philosophy is identical for the brand's suspension hardware, and the other great benefit is the sturdy Control Arm that attaches each front wheel to the chassis. A Control Arm made of high-strength steel or aluminum pivots on rubber bushings and a ball joint so that the wheel can move up and down yet stay pointed straight, minimizing vibration and tire wear. The part prevents bending during heavy cornering and absorbs severe shocks, so steering remains precise and the cabin calm, reaffirming the well-rounded character of Mitsubishi models.

Pick genuine OEM Control Arm if you want superb performance and durability that lasts. Mitsubishi builds that using high-grade materials and official factory techniques to meet very strict standards. This means you get parts you can actually trust for your daily drive. Finding the right parts is simple in the massive stock of genuine inventory. You can stop guessing if a part will fit or hold up. You will love the low prices, dependable service and the real manufacturer's warranty on Mitsubishi Control Arm. Order today and the store will ship your brand-new items to your door as fast as possible.

Mitsubishi Control Arm Parts Questions & Experts Answers

Lower Control Arm, Driver Side
4013A461
Q: How to remove and install the rear lower control arm on Mitsubishi Lancer?
A:
In order to lower control arm removal and installation, first raise the rear of the vehicle and support it on jackstands. Remove rear wheel. Eccentric Bolt and Plate Installation Procedure: Mark the installed position using quick drying paint and remove the inner and outer pivot bolts from the lower control arm's chassis and trailing arm connections.Mark the installed position of the eccentric bolt and plate at the inner end of the lower control arm using quick drying paint. Remove the inner and outer pivot bolts from the lower control arm's chassis and trailing arm connections. Subsequently, take out the suspension unit to lower control arm retaining nut and withdraw the bolt then take out the lower control arm from the vehicle. Check the control arm bushes for wear and deterioration, check the control arms for cracks and damage, check the bolts and nuts for wear and damage, renewing as necessary. To install the assembly, place the lower control arm back into the vehicle assembly and insert the pivot bolts without tighten the nuts at now. Fit the rear wheel after loosely putting the suspension unit retaining bolt and nut in place. Lower the vehicle to the ground and bounce the rear end up and down several times to stabilize the suspension, ensuring the mark made during removal on the eccentric bolt and plate are in the correct alignment. With the weight of the vehicle on the wheels, tighten the nuts of the pivot bolt to torque. To renew the bushes, you need to first remove lower control arm and also observe position and direction of bush. Utilize a suitable press and press plate or pipe and support the lower control arm correctly around the bush housing. Ensure that nothing stops the bush from being pressed out. To press out the spacer and bush from the lower control arm, employ a spacer that is a little smaller than the bush's outer diameter; this will prevent distortion of the lower control arm in the vicinity of the bush housing. Always support lower control arm securely and squarely, preferably using either a manufacturing designed lower control arm bush pressing or a shop press base to maintain vertical pressure. Ensure that the bush and bush recess of control arm are lubricated with a soapy solution. Gently press the bush into the control arm, in the opposite direction to that of removal, before reinstalling lower control arm.